Shortcut Properties - Settings And Preserving
Sep 21, 2015
I am working with a fresh W10 install. I am used to W7.
One old (x86) application I run requires that I configure the Start in setting for the shortcut that launches it. The shortcut that was placed on the desktop did not let me change that. The shortcut in the New list does not let me change that. The shortcut in the All Programs list does not let me change that. Right-click does not offer Properties.
I created a new shortcut on the desktop. That lets me open Properties, so I was able to make the required change to Start In. That shortcut launches correctly. However when I right-click in that shortcut and Pin to Start, launching from the Start menu does NOT launch correctly (which is to say, the program is not started using the Start In value). Apparently the property I changed is lost for the Start menu.
How can I control the Properties of this in the All Programs, Start menu, and other places where right-click does not give the the Properties option? How can I keep a change to Properties from being lost when an item is pinned to Start? Is any of this even possible?
View 1 Replies
Similar Messages:
Sep 23, 2015
I am working with a fresh W10 install. I am used to W7.
One old (x86) application I run requires that I configure the Start in setting for the shortcut that launches it. The shortcut that was placed on the desktop did not let me change that. The shortcut in the New list does not let me change that. The shortcut in the All Programs list does not let me change that. Right-click does not offer Properties.
I created a new shortcut on the desktop. That lets me open Properties, so I was able to make the required change to Start In. That shortcut launches correctly. However when I right-click in that shortcut and Pin to Start, launching from the Start menu does NOT launch correctly (which is to say, the program is not started using the Start In value). Apparently the property I changed is lost when the shortcut is move to the Start menu.
How can I control the Properties of this in the All Programs, Start menu, and other places where right-click does not give the the Properties option? How can I keep a change to Properties from being lost when an item is pinned to Start? Is any of this even possible?
View 12 Replies
Jul 21, 2015
It seems when updating online between builds, settings are lost, registry tweaks etc.
View 1 Replies
Oct 20, 2015
How can I change the Protection Setting of external drives from OFF to ON in order to ensure equal treatment when setting a Restore Point?
View 6 Replies
Dec 13, 2015
Is such a shortcut possible? I can't identify a file to open,
View 3 Replies
Jan 31, 2016
So what does this do on windows 10 ? and is it needed ?
View 4 Replies
Aug 6, 2015
I was surprised to see that when I went to print a file from Edge, which required access to Printer Properties to adjust scaling, the facility was not enabled. IE used to handle the need very well.
View 3 Replies
Jan 27, 2016
Today I received a dubious email, from a person unknown, to which a .zip file was attached, purporting to be a copy of an invoice. I saved the attachment, and then scanned it with Bitdefender and MBAM, both of which reported negative results. I then carefully opened (not extracted) the .zip file using SecureZip. There was a single file in the .zip container, which had a .js file extension (Java Script).
I don't have Java installed on my computer, but I took no chances, and used "Eraser" to shred the .zip file that I had saved in my "Downloads" folder and then deleted the email from my In-Box and Trash.
In my Windows 7 days, using Live Mail, I could right-click an email and display its properties to determine from whence it had originated, and other useful information, which was very useful in determining the authenticity, and originator, of the email.
View 3 Replies
Mar 5, 2016
OK, so I open up "file properties" and I want to change the program that opens a particular file type when I double click it.
Windows 10 won't let me do this.
None of the buttons work - the "Change" or the "advanced". I can change tabs, but I cannot change the default program for a file type. I clicked it a bunch of times and I half expect in a few minutes I'll be deluged with dialog boxes all at once, but so far nothing.
View 5 Replies
Jul 31, 2015
Okay, I was following this tutorial ( How to customize the Start list in Windows 10 ) and noticed that I don't even have the, "Start Menu" tab. Is it supposed to be gone? If so. How am I supposed to customize the start list?
View 5 Replies
Feb 10, 2016
I used to use Windows 7 and I could just right click on my internet explorer (or any browser for that matter) and then I could select properties. If I do that in Windows 10 all I see is "unpin from Taskbar". How can I get to the properties?
View 9 Replies
Oct 4, 2015
Two days ago I woke up to this problem, my icon pictures are gone and I can't access properties when I right click anything. So, night before everything was fine, PC went to sleep mode, next morning i get up wake PC from sleep mode and the problem i mentioned was there. Some of the icons i used are custom and some default, so the problem is not in one of those 2 things, and since i cant access properties i figure it is some deeper issue than just icon's picture missing.
Here is the screenshot, i'll leave it like this here, too, because I am new here and not sure how attachment thing works
View 5 Replies
Jan 7, 2016
It started to happen yesterday, and when I "Right Click -> Properties" in any icon, nothing shows up. I tested with every other right click menu's options and they worked fine.
View 4 Replies
Nov 30, 2015
Recently installed win10 64 bit on this dell latitude D630 and all has mostly been going well. (Upgrade from a new win7 installation. I have installed many OSs on this laptop, and they have always been speedy, including win10 32 bit.
Problem developed a few days ago that is fairly annoying. When I right click on a file, and then select "properties", the properties dialog window can take up to 20 seconds to appear. Never had this problem. Other flaw which I think is related: When I make a shortcut to something, it takes 10 seconds for the arrow to appear on the icon.
This was always something that happened instantly before. I've turned off some services like superfetch, but no change. The computer is not laboring, there is just this delay on a common operation. This OS was cloned from another smaller and slower (5400RPM )hard drive, and I think the original did not have this problem. Have to check, but I've done a lot since then. Now a 7200 RPM drive. This HD was always fast. Never gave a problem, so I'm thinking it's OS related. Everything else seems normal/no delays.
View 10 Replies
Jan 16, 2016
When I do a "Properties" on my J: HDD it shows "Used space", "Free space" and "Capacity" for this HDD.
When I do the same for my F: HDD it shows ZERO for all three. See above.
BOTH drives are NTFS. Also when I do properties on a folder on J: it shows "Advanced" properties and I can encrypt the folder. Again when I do the same on a folder on F: it doesn't show "Advanced" properties and I can't encrypt the folder?
PS I'm on the latest update of Windows 10 Pro on a 64bit desktop.
View 9 Replies
Jan 25, 2016
All the app icons have disappeared from my desktop, as well as task bar and file Explorer. Where the icon should be is just a blank (but clickable) space.
I tried to manually alter the app icon by right clicking and going into properties, but no properties will open!
View 9 Replies
Feb 23, 2016
I am a hardcore Wow player, recently i encountered a problem that wont let me play wow due to my folders not able to being write wow files on my windows 7.
The was a message when ever i tried to run wow and that was "[COLOR=#EFC9A0][FONT=Arial]The CAS system was unable to initialize: Client Handler: initialization error: failed to create storage component"
At first i thought it was wow's problem and looked on battle.net forums but they all said that i must remove read only tag from properties of my wow folder.
I did everything i could on wow's side but nothing, then i tried looking on various windows's error forums and did the take ownership cerficate guide, the attrib -r [path] guide, changing security parameters from properties --> security ---> edit etc.
But nothing worked, as soon as i unchecked the solid square read only option and closed it , it came back like before. So I thought maybe windows 7 wont let me play the game, i bought windows 10 and installed it clean and removed windows 7 completely. and with no surprise the same problem persists. cant remove read only.
Then I read about NTFS being the problem, i have 2 sata harddisks and i formatted one and converted it to FAT system and copied wow folder to that drive. still it wont do anything same problem is there.
View 1 Replies
Feb 10, 2016
I've been fighting properties window since I installed window 10... I use this function a lot. The problem is the properties window opens in the background. So I have to minimize all the windows I have open to see the properties window. The weird thing is the properties window is the only one that does that, When I open a new window of anything it opens in the forground. Is there a way to force the properties window open in the forground.
View 5 Replies
Jul 29, 2015
[URL] .....
I am getting multiple "Downloads" folders appearing, all pointing to the same directory (E:/Downloads)
When I change one of them, they all change. Also no Documents folder.
Cant delete the extra folders.In the Properties > Location -- When I click "Restore Default" the folder url changes to "C:/Users/username/Documents/"
Where did my Original downloads folder go, and why are they all linked together anyway?
View 3 Replies
Sep 25, 2015
On the Task Bar and Start Menu Properties screen, my middle tab is 'Navigation'.
Isn't it supposed to be 'Start Menu'???
View 2 Replies
Jan 3, 2016
I tried everything to solve this problem but i can't fix it.
View 4 Replies
Dec 4, 2015
As per title.
Since the 1511 update I can't remove file properties from any video file.
It always says that the file is open in Windows Explorer...
View 9 Replies
Aug 1, 2015
Right clicking on a file/folder (On shortcuts it is working) And selecting properties will do nothing.
Having this issue since Windows 10 installation
Laptop Lenovo flex 2.
Additional detail: Well the properties opened once. After half hour I clicked on properties.
Also Cortana wont launch. It takes several clicks to start. And after it starts it is unable to hear me. But screw cortana. I will probably never use it anyway.
View 4 Replies
Jul 10, 2015
Ever since upgrading to the latest build, I have been unable to bridge/ unbridge my connection, nor get into Properties for any selected network adapters. What happens is if right-click on the adapter the task bar goes blank for a brief bit, refreshes, then the control panel/ network and sharing window closes.
View 4 Replies
Oct 19, 2015
When right clicking on taskbar to open properties window it does not show start button tab in Win 10?
View 1 Replies
Feb 21, 2016
I tried installing a color profile .icm file, and after doing this, the link to "Display adapter properties" in advanced display settings is broken. Is there another way to open this menu besides this link, or a way to fix the link? I've gotten partially around it by using DisplayCal to install profiles, but I'd like to look at my profiles and delete old ones.
View 1 Replies
