I'm currently trying to upgrade my Windows 7 computer to Windows 10. My attempt at upgrading to Windows 10 fail time after time. That's when i remembered I didn't install the optional update KB3064209 .Unfortunately, the infamous "death loop" happens when I do install; this only happens for Pentium G3258 users which I happen to be one. So to fix this I found out Asrock, my motherboard is the Asrock B85 Anniversary, released a bios update that says it's for the "update microcode 19". This happens to be what KB3064209 is... a microcode update.
Link to new bios (it is the version 1.40): [URL] .....
The question is should I flash my bios for this situation? After all the warnings I've read about never flashing bios unless something is a catastrophe?
I cannot seem to install any other way. Media Creation Tool will not start. When I mount the ISO and click on setup I am given a small, rectangular blue window that says "Windows", and it disappears after a second. I have a tried through Windows Update and get fail code 8007005. I also have been notified two separate times through "GetWindows10" icon that I am ready to install and once received the 80070005 code and the other time the famous "Something Happened" screen.I was able to create a bootable flash but my understanding is that I can only perform a clean install if I boot with it and would need to purchase an activation code.
I am running Windows 8.1 64-bit on an HP Pavilion 15 series laptop and I am able to successfully update anything through Windows Update except Windows 10 upgrade. All of my other *.exe files start fine except Setup on Windows ISO.
I need to create a windows 10 PRO ISO on a flash drive to do an upgrade. They already have Windows 8.1 PRO so they need to upgrade to the windows 10 PRO version.
On the windows media creation tool, I only get an option for windows 10, not any other version of it. Where can i find the official ISO file for it.
I currently own a Dell Inspiron N5110 laptop with Windows 7 installed, but just received the last part to build my own desktop today! I'm looking to get Windows 10 on my new PC.I recently received the "Get Windows 10" button in the toolbar on my laptop, but when I click on it, it says I can't upgrade to Windows 10 because "the BIOS isn't supported".
However, I don't really want Windows 10 on my laptop; I'd much rather have it on my new desktop. So, my first question: is there a way that I can download a bootable Windows 10 file to my current laptop, transfer to a flash drive, and use that to install Windows 10 on my new PC right out of the box, all for free?
So my next question is: will buying and downloading the version of Windows 8.1 Pro in the above link work for my situation? That is, is it a full install in the sense that I will be able to make it a bootable file on my flash drive to install on my new PC? I believe I would have to download a Windows 8 ISO file to start.
My last question: is there an easier alternative to getting Windows 10 on my new PC, and if so, what is it? I think I can download Windows 10 here: URL... I'm not quite sure how that process would work either.
When running windows 7, for the first few seconds upon booting my laptop, it would display a startup message,
"Press ESC for boot selection, F2 for setup, etc......."
Now, nothing. I cannot choose to enter setup, BIOS, get to ESC for a boot selection screen in case I might want to boot from a flash drive or a floppy just once. How to get it back either.
i got a friend who is having problems up-grading from 8.1 to W-10 ! It's a Asus Gaming computer he tried this link >>> Windows 10 <<< So he sent me this message "Tried running the Windows 10 upgrade its saying BIOS isn't supported" !!
I've trying to update an Advent netbook to windows 10 from 7. It's been a hassle all the way with hangs on 'checking for updates'. However, I got through that but now it's stuck on 'Get going fast' screen.
I had selected 'use express settings' and now it's stuck on that screen. The mouse still works but nothing happens. I left it on all night. It's still on the 'get going fast' screen.
If I reboot (even remove battery) I get the initial advent boot screen but no bios info. Del, f12, f11, f2 etc do nothing. The blue 'win 10' logo appears briefly then back to the 'get going fast' screen.
I also tried the usb flash drive that had the old os on it but it won't boot from it despite that being the initial boot setting in the bios. Has win 10 bricked my netbook?
I have the BIOS setting to auto power on every day at a designated time. It has worked with a dual boot Win 7/8.1 system. However, since upgrading the Win 8.1 to Win 10 (dual boot Win 7/10) it no longer powers on at the designated time. Its still set up correctly in the BIOS.
This is apparently not the "fast boot" option that was in Win 8.1 as I can access the BIOS on power on (couldn't with the Win 8 fast boot).
I have an Asus AiO ET2221A upgraded from Win8.1 to 10 3 months ago, and today only boots into the EUFI BIOS screen. There are no errors reported on Boot, just the BIOS screen
I was able to run Memtest from a DVD - fine, but couldn't boot into Hirens on USB or DVD. The BIOS does list the hdd partitions, plus I can search the hdd partitions/folders from within BIOS(!!).
I did remove and run Chkldsk on anther PC which showed/replaced several errors (20 bad sectors). I also loaded the latest BIOS download onto the hdd which in theory I can access from within BIOS. However after replacing the hdd after the chkdsk repair, it still wouldn't boot into Windows.
I am surprised as I would expect the BIOS to report it can't find the Windows (if it is the disk), rather than stick in BIOS without any diagnostics.
So I am still in a quandary as to whether this is a BIOS issue and/or a HDD issue, plus by upgrading from 8.1 to 10 the latter usually corrupts the Windows (8.1) recovery partition.
I am no expert on EUFI BIOS, but I understand that the Windows License is stored within the BIOS. If I try and re-install the BIOS is the license retained? And from that could I also re-install WIndows 10 from a download?
Edit: since posting I have got the system to boot into Hirens, but as soon as XP starts to load it turns off the USB mouse/keyboard so becomes useless. All I did was to switch off secure boot, and specify the boot order, either optical or USB. Progress but not sure what it tells me, or how I can get the usb mouse to work in Hirens in a eufi system (not had this issue before with non-eufi systems).
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7.
But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart Now. But I have no option to Use a Device. If I choose Troubleshoot then Advanced Options, the subsequent screen has no option for UEFI Firmware Settings.
I've disabled Fast Boot through Power Options in the Control Panel, then tried F2 and the Delete key when starting. Nothing...
The fact that I can't do something that was so easy in Windows 7 is enough reason in itself to remove 10. Throw in the fact that the scanner part of my printer no longer works is just icing on the cake. I have the Windows 7 disk. I just can't figure out how to use it.
I just did a complete upgrade of my PC replacing motherboard, video card, processor and power supply but keeping original hard drives. I did a fresh install of Windows 7 and then upgraded to Windows 10 soon after completely smoothly with no issues. My boot drive and external survived, but for some reason, even though it was handled with great care, my other SATA hard drive doesn't appear anywhere anymore. I can hear it spin when I boot the PC but it doesn't appear in BIOS or in Disk Management. I changed the cable and the port it was plugged into but no dice.
If it is indeed dead...what are my options in recovering the files? It is essential I get these files back!
It kind of worked on and off when plugged into my brother's PC which uses a different make of motherboard...
Yesterday I got a notification that my windows 10 upgrade was ready on my MSI GT60-0NE laptop and decided to give it a try because I really disliked windows 8.1. Windows update went through downloading the files and preparing the computer for installation. It then did the usual, configuring updates on the blue screen, got to 100% and just shut down completely. I left it there for about 5 minutes and decided to try to power it back on. When turning the computer back on, it stayed on for about a minute and then cut itself back off.
After waiting a minute it turned back on, then back off again. It kept repeating this for about 5 minutes. During this phase I saw absolutely nothing on the screen, no MSI loading splash screen, no cursor, absolutely nothing at all. I couldn't enter the BIOS, couldn't run recovery or even get into safe mode. Absolutely nothing worked. The battery light was also flashing blue which I had never seen before. During this time the hard drive light was flashing and flickering the usual red light.
I did a hard reset on the computer and then turned it back on. When i powered it back on the screen was still completely blank, no MSI splash screen, no cursors, couldn't enter the BIOS or anything. During this time the hard drive light was a steady red. The blue battery light was no longer there and it was back to its usual constant red light. After about 10 minutes the computer turned itself off. Being frustrated I left it overnight and tried again this morning.
When I power the computer on now, there is no hard drive light. It doesn't even give a single flash of red. The computer will stay on but just stays there at the black screen. I've tried to look for solutions but I can't get anything to work. The only thing I can hear running is the fan.
I've tried to remove the hard drive and boot to see if I could get into bios, still a black screen. I've tried removing the video card and booting to see if I could get anything through integrated graphics, still a black screen. I've tried to plug the computer into another monitor, still a black screen but it does recognize the signal.
Specs for the GT60-0NE 403-US: Intel Core i7 3630QM (2.40 GHz) Nvidia GTX 680M (4GB) Windows 8.1 64-bit (Windows 10 now?)
I'm interested in the W10 free upgrade from a usb ISO image. I now have W7.
A couple of questions concerning the W10 installation from a bootable usb ISO image - will the hard drive require prior repartitioning, and what do I do when the install process asks for the license key ? AS I recall, installing W7 without a key only allowed 30 days of use.
In Windows 10, I insert the flash drive and the File Explorer window opens. I then double click on a file to open it's supporting app. I close both the File Explorer window and the app and eject the drive. The first eject results in a "device is currently in use" message. The second click displays the "Safe to remove" message.
If I don't open the app and just close the File Explorer window, the first eject attempt is successful.
In Win 7, I could eject the drive without closing the Windows Explorer window or the app. Ejecting the drive would close the Windows Explorer window and leave the app open, displaying the "Safe to remove" message. The file would remain in memory to be read. But an attempt to save it would fail.
It's not very often at all but now and then the desktop icons will refresh in a split second, is this normal? I also use fast start/boot. It's very quick, goes through bios and login screen is instant but the icons don't all pop up on my desktop immediately, some of them display whilst a handful tend to take a couple seconds to display (white generic paper icon) until this happens, happens every boot. It's still extremely fast, got a love SSD in combo with fast boot.
I notice the flash most when new software is being installed although I am not sure that's always the case. Would increasing the max icon cache work? I am sure this is more useful if icons start changing but maybe it is an advisable move? What is the default size of the Max icon cache in Windows 10. I am sure it was 500 kb on Windows 7.
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop. 2.Windows will start up to the login window and then freeze. 3.Computer will start, have a blank screen, but still have mouse that i can move. 4.Computer will start with error "hard disk (3f0) Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
I was going to make a USB Flash Drive to install windows 10 as described in tutorial by Brink. But I find that ISO has been removed?? Can I still make Flash Drive / How?:
Having recently upgraded to Windows 10 from Windows 7 I have tried to create a recovery drive to go on a USB flash drive. All I get, however, is the message " We can't create the recovery drive. A problem occurred while creating the recovery drive". I have tried a few times without success.
I looked at the Event Log and saw the following which, I believe, is related to the problem: Microsoft-Windows-CAP12. I.D.513.
Windows install says ( Can't install on USB flash drive.). That's how it sees my SSD. Do I have to put my original HDD back in, image SSD to it and then try to install?
