Current Windows 10 (build 10240): I'm trying to turn on Bitlocker on my system drive, an SSD. During Bitlocker's preparation, shrinking the volume, I get error 0x80042574, and Bitlocker enabling will not proceed. The SSD reports 46.5 GB free out of 238 GB, and scanning it reports no errors.
(This is a UEFI system, and the system SSD has a 100 MB EFI system partition.)
I enabled the boot to startup settings option in winaero and now my computer boots to bitlocker. I checked online and I don't have the key for it. What can I do? (Computer is surface pro 3 i5 4g of ram)
View 1 RepliesIs there a way to make start menu smaller , since I don't have many tiles active.
View 4 RepliesI just bought my surface book. I am trying to partition my C Hard drive. I thought that I have to shrink it first, then create a partition. However, the shrink space allowed is only around 3 GB. My disk size is 512 GB.
I defragmented (or now called optimized) the C drive and retried it, but no use. I would like to create a new drive call it D, and leave C for windows only.
Is it possible to enable 4 way scrolling with Apple Magic Mouse on Windows10? I loaded the drivers from Bootcamp which enables 2 way scrolling. The only drivers I have found that work well are from Parallels on my Mac. Trying to enable the same capabilities on my PC with the Magic Mouse.
View 1 RepliesI have a brand new HP laptop that came with Windows 10 home installed on it. I have downloaded and applied all updates from MS.
I use a Wi-Fi connection to my Time Warner router. I have everything setup and things seem to be running fine.
Here's the deal.
I thought I would try and use my blue tooth external speaker. (Just to see what would happen.) I enabled Bluetooth.
StartSettingsDevicesBluetooth.
After I move the slider (so the status reads (On), .... I see a message that reads "Your PC is searching for and can be discovered by Bluetooth devices".
Two things happen:
The "search" never seems to end. And I lose WI-Fi connectivity.
I finally, move the Bluetooth slider to the "Off" position and my Wi-Fi connectivity returns.
I "do" see my external speaker. And it does work. (As long as "Bluetooth" is enabled.)
But of course, I then have no Internet connectivity and THAT becomes an issue for me.
I would like to enable JavaScript on my computer/Microsoft Edge browser/Google Chrome browser. How am I supposed to do it? What should I do if it is not possible to enable it?
View 3 RepliesI have a client that has a Microsoft Surface Pro. It has a BSOD error code 0xc0000001. I have tried many ways to repair but I am unable to since Bitlocker has locked the hard drive. The client swears they never activated it and does not know the code to unlock. They did not have a microsoft account so I cant go that route. How to unlock hard drive without the bitlocker code?
View 1 RepliesSo at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
View 6 RepliesI have read, on the Internet, that Bitlocker can be got into, without using the password, by 'experts using encryption breaking tools.
I use a 13 part password, incorporating upper case & lower case letters, numbers and special (punctuation?) symbols.
So, just how secure is Bitlocker?
I have a usb that has been encrypted using bitlocker, I can connect this usb to my desktop and I can input the password and access the usb. However on my laptop and other computers, when I plug in the usb I do not get the prompt to input my password and instead just says that the drive is inaccessible. Both my laptop and my desktop are windows 10 and I have admin rights on both machines. On both machines I have not used bitlocker, how I can access my usb on normal machines and how I can open my usb on my desktop but not my laptop?
View 2 RepliesI have tried everything I think, but obviously not.
Cannot open TPM, pop up tells me I do not Have at least 1.2. Cannot open Bit locker until I complete TPM wizard and assign myself as administrator??. then I can open Bit locker and proceed to encrypt my hard drive??
Is there a download for 1.2++ or is it a hardware addition..
When I switched my laptop on a few hours ago it stated bit locker and key needed. I've tried to reset and remove all personal files (all my files are saved on cloud) but their 'was a problem resetting pc'. Then tried to get key (using internet on phone) but their was an error from Windows when I tried to input password for accessing cloud. However I can access my cloud through the app on my phone without any problems.
Called a pc repair service and they said the only option was to wait until I Windows could give me a recovery key.
I want to use Bitlocker on my Non System E Drive without TPM. I read somewhere to do the following for without TPM:
" Under Local Computer Policy navigate to Computer Configuration Administrative Templates Windows Components Bit Locker Drive Encryption Operating System Drives and double click on Require additional authentication at startup." and so on.
but I am confused because the above note is mentioning "Operating System Drives " wherein I want to turn on Bitlocker on Non System Drive.
Can we turn bitlocker "on" on Non System Drives without turning it "on" on System Drives and Can we turn it "on" on a Single Folder instead of Drive.
I just installed Win10 Pro and I love it. When I enabled BitLocker, I selected to encrypt the Entire drive instead of the Used Space because I just feel I am safer with encrypting the entire drive. And my drive is not new. It had Win7 running before.
So I did a clean install of Win10 pro with BitLocker enabled to set to encrypt the ENTIRE drive. The encryption process took 7 hours to complete on a 300GB internal disk drive
When I had Win7 (and even Win8.1), it did not take that long to encrypt and I have the same exact internal drive. In Win7, the whole process took 1 hour. And with Win8.1 took a bit more time, but not 7 hours...
Why is entire disk encryption takes this long on Win10?
And also, I do not have a whole lot of programs installed. I have like 6 programs installed and there not that huge in size.
I get this BSOD while unlocking storage drives. My OS is on a Vertex 4 SSD My storage drives are on HDD. I would say I have 50% chance of a BSOD unlocking drives.
View 3 RepliesIf I enable Bitlocker with TPM (i.e. no passcode required on boot-up), and I have the Local Administrator account enabled on the machine (with my normal user account as a standard account), would it be possible for someone with a Hirens Boot CD blank/reset the Local Administrator account password and then gain access to the PC/Laptop using a tool such as this: Offline Windows Password & Registry Editor
Should I be enabling the PIN/Password protection on BitLocker, or does BitLocker prevent these sorts of tools from being used?
This morning I tried to login to my windows machine, windows 10 pro, intel i5 3.30ghz, 12gb RAM, 2TB HD. and kept telling me password was incorrect. I then removed windows password thru other admin user, and now all external hd's except for c: drive all lecked by bitlocker. Never installed or activated it.
I have 2 internal sata drives and 2 usb drives locked. I have gone to control panel, bitlocker, and tried to unlock drives, tried to do a search for key id on pc and nothing is found. My raw files are in the backup drives.
I am running Windows 10 Pro. I am using BitLocker on a non-system drive and not on my system drive. I am not planning on using it on my system drive. I do not have a TPM compatible computer.
Once I log into Windows, I would like to be prompted for the password to unlock my data drive. I did have this running correctly before I started having problems with my computer and had to do a clean install of Windows 10. I have searched for hours but can't find the article that walked me through how to do this.
I found a ton of articles that don't fit my situation because I don't want to auto-unlock, use a USB key or encrypt my system drive.
My query is regarding a brand new i7 sixth generation computer with Windows 10 Professional, including all the Windows upgrades, and a new Samsung SSD hard-drive.
The reason I bought Windows 10 Professional was for the full hard-drive encryption provided by Bitlocker in case my computer gets lost or stolen, as has happened to me previously. However, I have an ongoing problem with it and can't find a solution anywhere. I have tried to telephone Microsoft's telephone support several times but it has been beyond a joke with their outsource staff in far-flung countries with poor English claiming Windows 10 Professional does not have the option of Bitlocker or any form of encryption to all kinds of other absurdities.
Whenever I start my computer it does not ask me to enter a Bitlocker username or password (I am asked for the Windows password, but, as everyone knows, those are not totally secure and do no protect hard-drive data access). Also, in the Bitlocker section in Control Panel, I am not giving the option to edit a Bitlocker password, even though that option exists in all the other screenshots I have seen on the web.
How can I set my computer up to present me with a Bitlocker password on boot-up?
My system does say my hard-drive is encrypted, but how can I certain of that if there is not even password protection?
Here is what I see in my Windows Control Panel > Bitlocker section:
I note the warning message about rights being restricted to the system adminstrator, but I am the system adminstrator and have double-checked that.
Yesterday I was decrypting my USb drive which have Bit-locker encryption and at 10% decryption I got some error(Error not at decryption process, error at windows) and decryption just stopped responding.
Now when I insert that drive and try to unlock with correct password, or with the correct recovery key, Its not unlocking. Says "This password is incorrect".What could I do now?
I have been using BitLocker for a long time now and in conjunction with Windows 10 for 3 months and today something weird happened. When I tried to insert my password at boot, when I pressed the Shift key in combination with any other key, it inserted tens of characters at once. Valid with any character I press while Shift is also pressed. I tried a different keyboard, same result. I removed Bitlocker and reinstalled it, same result. Reboots, etc. I tried it all.
Now the only way to input the password is to press Insert so I can see the characters, press CapsLock for the capital letters and delete all the additional 30+ characters that appear when shift is pressed.
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 RepliesSo I just updated to ten, and have all the updates, but whenever I try to run a .exe file, it gives me the error "|:
File System Error (-1073741819)
What this error is that I get sometimes when I go to Start/Power/Restart? It's it hardware related?
View 3 RepliesIm trying to update to windows 10 & keep getting error 80072efe.
View 1 Replies