W7 used to be fairly slow to start, about 2 minutes, but it shut down pretty quickly. Since "upgrading " to W10 my PC takes about 3 minutes to boot and even longer to shut down. Unless I can leave it, I usually just switch it off after about 30 seconds.
In other forums I have heard reports of boot times ranging from super fast (15-30 seconds) to funereal (5 - 10 minutes and then some). How to speed this up?
I was thinking that a clean re-install would be the best solution, but since this was the free upgrade, I don't have a copy to re-install. Maybe do a clean re-install of W7 and let MS upgrade it again (maybe!)
10 doesn't seem to be booting very nicely. What I mean is that it seems to be having a difficult time initilizing my SSD, so upon boot I get a blank black screen for anywhere from 60-180 seconds, where the primary drive activity LED is inactive, before it actually boots. This could be problematic, because I need it to both boot and shut down very quickly since I use my laptop for class; no sleep mode, either, because my system is old and batteries no longer work with my mobo.
Just upgraded (via Windows Update) from Win 7 Pro to Windows 10.Upgrade generally went smoothly, but....My PC now shuts down very slowly and oddly. The screen and keyboard turn off normally, in a few seconds, but the system box (fans, etc.) remain on for about 2-3 minutes longer. What the system is doing while this is going on!
Having problem with a computer that will not shut down completely after Windows 10 update? I have one and discovered that if I turn off the fast start option it will shut down all the way.
I just updated my windows 10 build 9926 to 10041 and I found start up is too slow about 1-2 min, in 9926 is was just around 20-30sec. And its also freezing a lot on my dell laptop.
I got a annoying issue with my google chrome when i click on it it takes so long to start up and I have no problem with any other program and sometime I get black squares when i open a new tab its really annoying. I have tried most thing like uninstall and install tried unchecking hard ware acceleration and tried winsock reset to I dunno what to do ...
I'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot.
Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images.
Regarding the boot time: I've narrowed it down the an unexplained read/write access on my external HDD eSATA which is used for backups, though currently all backup process are stopped.
When I remove / turn off my external HDD, boot time is about 8 seconds. I can't figure out why all of a sudden it required this access to this HDD.
I followed Brink's tutorial here: Shut Down Computer in Windows 10 And I saw that there are 2 ways to fully shutdown Windows through cmd: /s and /p. What is the difference between these 2, if both of them are said to perform a full shutdown?
This is something that recently just started happening. I click on the start button and click Shutdown and everything seems to go normally and the monitor goes black but the computer will not shutdown. The activity light continues to flash and after a few mins my PC just boots back up, almost like it was doing a reboot.
I am in a similar situation. Upgraded a self build PC from Windows 7 to 10. Now, I am unable to shutdown. I have turned off the Fast Startup, but it still reboots when I hit 'Shutdown'
when I shutdown win 10 it goes through the shutdown process the screen goes off but the PC keeps running for 3 to 5 minutes it didn't do this before it has just started in the last week.
Upgraded from Win 7 which ran as normal. But now under Win 10 Pro, both "Restart" and "Shutdown" produce a restart.I have reflashed to the last BIOS just in case but to no avail.
I have installed W10 twice using the update feature. Everything work fine except when I want to shutdown or put the machine to sleep by clicking on those options, the machine makes noise like the HD is working. It then just shuts down and reboots again. The only way I can shut it off is by using the button on the computer.
I set my screen to turn off after ten minutes but it doesn't shut off. Today I read somewhere that it could be because I have a USB hub plugged in. Sure enough I unplugged the Hub and my screen shuts down as I have set it up to do. I need what is plugged into my hub and it is a real hassle to reboot my machine when I plug the Hub back in. I have also noticed one more thing and that is that programs that run in the back ground for instance Seti @ Home slows way down since the screen stays on.
I've installed Windows 10 just fine, with the latest Nvidia Win 10 driver, however when I reboot my system nothing works, not the start menu, not the apps, they do nothing, can't shut down except for a hard shutdown, after the hard shutdown the start menu and apps work fine until the next shutdown,
I set up a "shutdown" shortcut on my desktop that calls "shutdown.exe" and almost every time after I click on the shortcut I see a message dialog box that saying explorer is not responding and it takes a while for that dialog box to close and then finish shutting off the computer.
I've noticed this also happens when using the start menu->power->shutdown.
Is there a way to shutdown windows 10 without installing updates? I know previous versions of Windows had command line or registry tricks that worked with this. Note the version of Windows 10 I am using is the normal version you get with the free upgrade.
Problem : HP proBook 6570b goes into sleep mode when clicking on start /power / shutdown .
What I have tried : went into advanced power setting in power & sleep tab and made sure the correct settings were applied under power button and lid and some other setting . I think they look correct anyway but i,m not an expert .
Uninstalled the HP power management app in case there was some conflict but this didn't change anything .
Current state : Able to do soft shutdown till system goes to sleep mode then press power button 5 seconds to completely shut down .
I've been looking into clearing the pagefile, and I found the following steps at a somewhat dated webpage:
In the registry editor, navigate to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementSet ClearPageFileAtShutdown to the REG_DWORD value of 1.Restart Windows.
I'm just wondering whether those steps are still valid, and, if so, does clearing the pagefile work as advertised?
I installed Windows 10 one week ago, but I still have issues with the sleep mode. I configured the laptop, that whenever I close the lid or I use my function key the sleep mode is started.
Unfortunately the laptop is either not entering the sleep mode correctly or is not able to restore it. Which means when I open several programs they won't open again.
If have an ASUS Transformer Book Flip TP500LA: Intel i3 4030 4 GB Ram 240 GB SSD
I tried the following so far: BIOS Update to the newest version 203Downgrade the Intel MEI driver to an older oneReinstall the graphic and touchpad driver Nothing of that was successful. Are there any logfiles to analyse?
Okay so I've upgraded and use windows 10 for about 2 weeks now. All is fine until I've experienced this random shutdown where the computer turns off completely in a splitsecond then reboots itself.No BSODs, no warnings at all. Recently, it's been shutting itself down and reboots itself but won't even make it to the login screen before it shuts itself down again and this will continue in a loop. I had to turn off the plug and turn it back on. It will prompt a system restore which the computer will work fine for a while after the system restore. I assume this problem is because of windows 10 because I have not experienced this problem when I was using windows 8.1.
