Trying to fix this error I am getting it says the procedure called failed everytime i try to open my file explorer on windows 10 so i ran some of these cmd prompts that someone suggested an this is what it is telling me the source file cannot be found error 0x800f081f. here is the log file that cmd saved for me. I even did a computer reset that did not work the error came back again.
Attached Files : dism.log 214.54KB
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 RepliesI had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
cbslog.txt 3.79MB
dismlog.txt 447.82KB
SFCFix.txt 926bytes
After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them.
Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:SourcesInstall.esd:1 /limitaccess both came up with the error 0x800F081F.
Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
I just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
Downloaded files disappear in w10 home.They are not anywhere, not even in file history. Recuva revovery software does not show anything.
Alberto Product name:HP ENVY 17 Notebook PC
Product number:G0U21AAR
Serial number:6CF4482BZW
BIOS:F.34-12/19/2014
Keyboard revision:77.35
Total memory:16.00 GB
Processor name:Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz
Is it normal that if I type net start tcpip6 on the cmd the result system error 2, not found?
Also, I do not have the file tcpip6.sys on /system32/drivers. Why is that?
Have had new win10 desktop pc a couple months now and all of a sudden my photos aren't viewable and live tile isn't working on start menu..
and a window pops up with "element not found " as attached.
Seems to be just my user (live account) which seems more strange.
Cant think of anything that I have done recently to make this happen either.??
Attached Files : Photo Error1.PNG 5.21KB
Just had computer upgraded to windows 10. When I try to acces the old shortcuts, I get path not found error message
View 2 RepliesI installed Win 10 a few weeks ago and today is the first time that I've turned it on since then. I checked for Windows updates and it found some and appeared to start to download and install them. Then the window disappeared and I checked for updates again. "RuntimeBroker.exe Element not found". What does this mean in Microsoftese?
View 2 RepliesI am unable to access one of three computers on my local network via File Explorer. I can access the other two and I can access a network local external drive.
The error is : error code 0x80070035 the network path was not found
This expands into: one or more network protocols are missing on this computer windows sockets registry entries required for network connectivity are missing...
The post from SimBy in Network Protocols says to disable netbios over TCP/IP. I don't know how to do that.
Windows 10 on HP Envy
There is an update available for windows update. But when i try windows shows no updates found with an error code 8024402F ... Why am I not getting an update for Windows 10?
View 1 RepliesI have a k430 Lenovo desktop. When I got home last night, I was greeted to a blank white screen that was unresponsive. When I restarted my computer (holding down power button) it gave me this error. I've tried swapping my SATA cable with an older computers cable, and a couple other fixes with the BIOS recommended from the Lenovo site, and I even tried running my windows 8 install disc to no avail. I can feel the hard drive working by touch. I tried booting in 'legacy' and it said no hard disk was detected.
View 2 RepliesI have a desktop computer, it was working fine almost a year and now from a few days I am having a serious issue and that is when using my computer (generally or during gaming) it displays an error i.e PAGE_FAULT_FOUND_IN_NON_PAGED_AREA. The screen turns pink and the edges are green (that's probably because of the resolution as I use 3840x2160 so the error kinds of destorts) but that's not the real issue, the main problem is the error itself.
My Computer specifications :
Intel i7 4790
Asus Maximus VII Formula ROG
Kingston 8GBx2 DD3 Ram (Simple ones, not the gaming ones)
1TBx2 Seagate HDD
Asus GeForce Titan X
Corsair CX850M.
Whenever booting my pc I get a "operating system wasn't found error". I've checked to make sure my hard drive was set to the boot drive and I've tried reinstalling but that doesn't work either.
View 1 RepliesI have a lenovo system that can't find the system disk ... Ctrl alt delete only gets me a blank screen and any key gets me the same error message....
View 3 RepliesSo I just updated to ten, and have all the updates, but whenever I try to run a .exe file, it gives me the error "|:
File System Error (-1073741819)
I tried everything that can be found on the internet, i tried to download from microsoft website, no luck, tried the offline install with the win 10 installer, nothing worked.
View 9 RepliesI was planning on doing a script that behaves differently depending on which wake source type waking up my system from hibernate. Im abled to differentiate between timer wake-up and mouse/keyboard wake-up, but not between mouse/keyboard and wake on magic packets. "Powercfg -lastwake" doesnt give sufficient info on hibernation wake sources. Using standby instead there is more info but there seem to be a problem.
Mouse/keyboard wake-ups and wake on magic packets both reports the network card as wake source type. That is clearly messed up, which makes it impossible to use standby altogether. I do prefer hibernate though. Its very hard to find info going deeper into this subject in order to get answers. Most topics just scratches the surface discussing issues with unwanted wake-ups, which I dont have. How retrieval of wake sources works and how to implicate lastwake/wake source results?
Code:
Hibernate...Wake on LAN2015-09-26 15:59:48 - Wake History Count - 1Wake History [0] Wake Source Count - 0Standby...Wake on LAN2015-09-26 16:14:57 - Wake History Count - 1Wake History [0] Wake Source Count - 1 Wake Source [0] Type: Device Instance Path: PCIVEN_8086&DEV_15A1&SUBSYS_85C41043&REV_053&11583659&0&C8 Friendly Name: Intel(R) Ethernet Connection (2) I218-V Description: Intel(R)
[Code]....
I have a Lenovo W530 laptop, that started with Windows 7 Pro, then got upgraded to Windows 8, then 8.1, and now 10 Pro.
I have the factory setup disks for only 7 and 8.
I ran DISM and it says the source files could not be found. From a similar problem several months ago, I sort of know how to work with DISM, but if it is looking for Windows 10 files, where would I point DISM ?
My next step is to use the log files, and attempt to find which files are corrupted.
I have a number of videos on my OneDrive (set up as a network share as I don't want to have my entire OneDrive here), and I have added the folder in the app settings, but nothing shows up.
View 1 RepliesWhen upgrading to W10 it failes. W10 can't get the source disk. I think it's because i have already moved my W7 from the HDD to a ssd disk using Samsung migration program delivered with the ssd disk.
View 1 RepliesI am having an issue with network lag. When doing any downloads from anywhere or any source. Firefox, palemoon. Display fusion wallpaper, or any downloads that happen online from any source.
Not sure what is causing it.
When checking resource monitor it shows network going up considerably , may end up trying a different network monitor that I can log.
my network itself is fine and fast, and contacted network provider and all shows good.