I'd like to get a 256gb SSD this week for my Win 10 install but keep all my games and large rendering files on my 1tb HDD. My games are all in their own folder C:/Games, can I simply move that folder onto the HDD (D:/Games) and be ok or will that cause problems (with registry entries perhaps?).
What's the best way of moving my OS from a 1TB HDD and splitting it up between that and the new, smaller SSD?
I want to do a fresh install of Windows on my new SSD and wipe everything off my current hard-drive. The reason why I want to do this is because my new SSD arrived and my drivers are a little bugged and I want to start over.
[URL] ....
That's the thing I'm going to be using^. I already have it on a CD.
So do I just plug in the SSD, then set the primary boot device to the CD? Then install Windows 10 64-bit to the SSD? That's it?
Also, how am I going to wipe my current hard drive?
Im looking for a software that splits a PC into 2 (controls separate 2 sets of keyboards and mouses). There are a few like SoftXpand or Aster Multiseat for windows 7 and 8.1. But I don't know if they work for windows 10.
View 1 RepliesNew win 10 and new dirve .drive shows in 'this computer'. Cant recognize any disks. here is the event log:
View 4 RepliesOkay, so I input my USB drive; it doesn't detect any data and wants to reformat it, I decide to go ahead with it, but it simply says "windows can't format device E:". It does the same thing with my MSI drivers disk..
View 1 RepliesI have got part way through the installation process and I received this message ..
"Windows 10 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GP disks."
This is a new install onto a new laptop with only FreeDos. How to get past this message.
Okay, I have Windows 10, and Macbook. My PC, have 2 hard disks, one is of 500 GB ( Seagate ) and one is 3 TB Western Digital (Black).
Machine is loaded with:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus MAXIMUS VII HERO ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 8GB (2 x 4GB) DDR3-1866 Memory
Storage: Seagate Barracuda 500GB 3.5" 7200RPM Internal Hard Drive
Storage: Western Digital Caviar Black 3 TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 770 2GB DirectCU II Video Card
I am planning to Install Mac OS X on 500 GB one and keep Windows 10 on 3 TB one. So is it okay if I will just remove the 3 TB Hard disk, and install Mac OS X on it ? 500 GB hard disk have files of Windows 8.1 already. But it is not my primary hard disk.
My nice new SDD arrived, I installed it into the PC and disconnected the other SATA drives bar the DVD, spun up my W10 DVD and fairly quickly had a new activated install of W10.
So I plugged in the old SDD (it has the old C: on it) and the HDDs and it booted off the old SDD.
Unplugged the old SDD, plugged in the new one plus the HDDs, it wouldn't boot.
Went back to just the new SDD installed, boots fine, hot-plugged the HDDs and it wouldn't see them.
So right now I'm back where I was with the old SDD and the two HDDs which are mirrored.
Since upgrading my SATA DVD/CD RW will not work. I insert a disk the light come on showing it is reading and than the drive opens and the pop up box appears stating "Insert Disk" . So I cannot install any of my software. I have read that a lot of people are having the same problem.
I went into Device Manager and it show this device is working, the drivers show 2006. The Drive is TSST corp CDDCDW SH-203N. I am Dual booting and at least get some work done on the tried and true Win 7 Ult.
I am currently unable to access my Local Disks, or open programs inside them, such as the task manager, user account control, and even the registry editor. Attempting to open anything (With administrator priveleges) just result in an access denied message. I have tried multiple solutions off the first searches on google, though none of them have worked, due to the things required in those solutions not being able to be accessed.
I have even tried to reset my PC and reinstall Windows, though when I click the "Get Started" button, nothing happens.
Is there any hope left for me, or do I need to get new drivers and abandon my valuable data?
So basically my laptop came with 1TB of HDD and right now I am only able to use like 500GB of it, the other 500GB seems to have gone missing and I can't seem to get it back.. I looked online and it told me to go on to disk management etc to try assign it but it doesn't seem to let me.. here are some screenshots..
[URL]
So as you may have noticed, the one I want to recover is that 383.83GB one but everything is greyed out so I can't format or anything!
Is there any way to remove eject from my internal drives. Windows 10
View 9 RepliesI just installed Windows 10 fresh and noticed that two of my Harddisks are not showing at the left menu in the Explorer.I have 3 Harddisks and only Harddisk D: ist showing. When i connect a USB-HDD it shows up instantly.
View 9 RepliesPrior to doing my Windows 10 upgrade on my HP Pavillion DVT7 2200 Notebook, I successfully created the 3 Recovery disks. Prior to that I was receiving messages that a hard drive failure is eminent and I should back up my files and replace the hard drive. My Windows 10 upgrade went fine and for most part I'm happy with it. My issue now is my XP Mode is not supported and I have lost a VM that is use run legacy software.
My question is when I run my system recovery is it going to roll me back to where I was before creating the Recovery disks? Will I have to reinstall all my software? I have ordered a replace HDD from HP and it will be arriving on Wednesday.
i got the windows 10 upgrade from windows update, downloaded it and installed it. went to microsoft website downloaded windows 10 to put onto a usb drive. before performing a clean install i partitioned my drive and dropped around 230gb of stuff on it (967gb total drive, partitioned 280). when i tried to format the drive i encountered this issue
"windows cannot be installed to the disk. the selected disk has an mbr partition table. on efi systems, windows can only be installed to gpt disks.".
I don't know if the problem is my hdd or my usb drive or my bios. i tried deleting the partition and then pressing new but i continue to get the same error. i tried looking around but i cant make any sense of the posts with this error being solved. one of the posts says to change usb efi to gpt in bios but i dont think that option is in my bios (i can post a picture of bios if needed). another option is to clean the entire disk with cmd but i dont want to lose the other partition.
So i currently have windows 10, build 10162, and i like the OS X, especially since i do video editing, and i love the workflow. The problem is, everything on my PC is optimized for windows, and some things wouldnt work on a mac, and i didnt want to spend the money on a mac. I know its possible to dualboot some OS's so i want to know if theres a way i can just add an OS to my current pc. I have an extra HDD that i could put it on. And i want to put Yosemite on it, and i also have an intel CPU, nvidia card, which i believe is necessary for a hackintosh.
View 1 RepliesWindows 10 downloaded and can't edit my current documents, why?
View 1 RepliesI no longer have the Insider app on my build of Windows 10.
I tried going to Settings, system, apps & features, manage optional features, but the Insider app is not listed as a reinstall option.
I am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.
View 2 RepliesI am in the process of moving from Europe to Canada and because of the ridiculous cost of shipping a PC across the ocean I will only move some parts (leaving mobo, case, power supply). I thought I could carelessly put my old hard drive in a new mobo but after some research it's apparently not so simple.
Any way to escape buying windows again (and maybe even a new hard drive).
Relevant information?
current HDD: (1tb 7200rpm... seagate possibly?)
cpu: i7 4770
gpu: gtx 770 (2gb evga)
ram: (currently 2x4gb, will add two more 4gb)
possible new mobo: Asus Z87-Pro ATX LGA1150
possible new SSD: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive
So I currently have windows 10, build 10162, and i like the OS X, especially since i do video editing, and i love the workflow. The problem is, everything on my PC is optimized for windows, and some things wouldnt work on a mac, and I didn't want to spend the money on a mac. I know its possible to dual boot some OS's so I want to know if theres a way I can just add an OS to my current pc. I have an extra HDD that i could put it on. And i want to put Yosemite on it, and i also have an intel CPU, nvidia card, which i believe is necessary for a hackintosh.
View 1 RepliesAfter using powershell to run a system scan and having it hang, I restarted my computer to sort it out and now I'm left with this info stuck on my screen.
View 4 RepliesI've got a new computer and I want to clone my old OS(windows 10) from my old hardrive to my new hardrive. I've read that it doesn't always work! Is this true? And is there any other ways round it?
View 1 RepliesI downloaded a .lua file and it asked me what do i want it to open with. I exited out and it still made all my .lua files a photoshop file. I have tried alot from setting default to trying to revert my pc 2 day backs still nothing. I know the default program is suppose to be called "Unknown application" but cant get it back. Here is a photo incase i didnt explain it well Imgur: The most awesome images on the Internet
View 3 RepliesI got an error message. saying "Either there is no default mail client or the current mail cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client". I check the outlook option and it is set to outlook as a default program. I also went to default program in the control panel and that is also set to outlook. When I open a saved mail on m computer with an extension .msg it will get that error message.
View 2 RepliesIs there any way to find out what the current version number of Windows Mail and Calendar app is? I don't think mine is the most current and I have a bug that sometimes makes a New Event post to the previous day. How would I go about updating this app as I can't find a check for updates button or anything like that. BTW, I have version no. 17.6525.42271.0.
View 3 Replies