Recently I ran to several problems on my windows 10 laptop. My laptop is 4K version of Lenovo Y50. It may have to do something with recent updates, but I am not sure when it occured. So, first problem is, that my start menu is not working. When I press the start button either on my keyboard or in the corner of my screen nothing happens and the same with search bar on my taskbar.
Also, some of the icons on right side of taskbar aren't working and one of them is wifi. I just can't find a way to connect to wifi. When I tried it on locked screen it said "connecting to the network is taking longer than usual" and did nothing. I also can't open the windows 8/10 special settings, it does nothing wherever I try to open it. I am also not home right now and can't connect with ethernet cable which seems to work.
Product Name: Hp Omen 15 Operating System: Microsoft Windows 10 (64-bit) Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I'm having issues accessing both the Wifi Panel and the Windows Start Menu from task bar at the bottom of the home screen. When I left-click on with it does nothing. I can right-click on the icons but still unable to open either. Wifi shows a connection (Wifi icon) but still unable to connect to internet. Other items in the task bar are accessible with no problems. Unable to download/update anything because of the inability to access the internet.
The Windows 10 start menu has stopped working. If I click on the Start button, nothing happens. I did a repair install and that corrected the problem for a few days. The problem has returned. No start menu. All updates have been installed.
Lost the ability to left button click on start menu. getting "critical error" "Your star menu isn't working. We'll try to fix it the next time you sign in." I have tried the cmd prompt and run several of the fixes suggested and still no luck. What next?
I recently installed Windows 10. I had this problem where explore.exe kept restarting. My friend had this problem too. He told me to create a new user. So I did. He also said to go to "c:usersold user" and copy everything from there to save my stuff. It was about 50 gbs so I did folder by folder.
When I goto Appdata, I copied everything from the old user onto the new one. But I accidentally deleted almost everything in Local. Now, the start menu isn't working and Windows Update isn't either. When I click on the start menu, nothing happens. I do have a system restore from before I deleted it. Should I restore it?
As I am typing this, I am running sfc /scannow
Got an error " Windows Resource Protection could not preforom the requested operation."
I'm looking at precisely this error message, in a blue box, on a friend's Samsung XE500T1C after an upgrade, via GWX, to Windows 10. The only option is to "Sign out now". Needless to say repeated log outs and log ins have not resolved the issue. Also the Windows Search/Cortana box doesn't work. I would suggest a Reset Install but, without the Start menu to get to Settings, I can find no other way to get to where one needs to be to do a Reset Install.
So I just upgraded windows 10 from windows 7 Pro and I when I got it I set up cortana. The next day I am not able to open the start menu or search for anything in the search bar. I've tried the powershell option both times but it just hasn't worked. Don't know what to do.
when i use my laptop at home, it can connect to my wifi without any problems.
when i get to work, it refuses to connect to our wifi network. i have the correct password and user name. the wifi is turned on. i restarted the computer and that didnt work. I've tried everything i can think of, including the trouble shoot guide.
When I start my computer, my Start Menu Search sometimes gets stuck in a start up or searching loop. The start menu itself works if I am just using my mouse to click icons. The issue is hitting the Windows button on my keyboard and typing.What is strange is that when this happens, if I log out then log in again, it starts up fine. While this is a workaround, I would like to solve the problem that is causing the problem.
I've tried re-indexing my entire computer based on a similar post I found here, but that did not work. Also - searching in a general Explorer window works fine showing the Windows Indexing does not appear to be the problem.
Windows 10 Start Menu & Cortana not Working with left click,, my start menu dont work , calender not work, and search button not work, search not work, notifie not work, volume not work, has you any parametrs to work? only work eit right click (parametrs) i has try few solutions but nothing doing. I try
Method 1 : Try to run a System File Checker (SFC) scan to check for any file corruption. SFC scan will scan for corrupt system files on the computer and repair them.
Press Windows key + X, click Command Prompt (Admin).In the Command Prompt, type the following command, and then press ENTER:
sfc /scannow
If the issue still exists, try the next method.
Method 2 : Check if the Application Identity is started and running.
- Open Run from Windows task manager as before. - Type SERVICES.MSC and hit enter. - Find Application Identity. - Right click on that and select Start.
If the issue still exists, refer to the following method.
Method 3 : Run the following command in an elevated Command prompt and check if it works:
Press Windows key + X, click Command Prompt (Admin). In the Command Prompt, type the following command, and then press ENTER : ren %windir%System32AppLockerPlugin*.* *.bak but nothing.
I occasionally (but frequently enough that it is noticeable) get an unresponsive start menu. When this happens Win+P for display switching also does not work. The start menu starts working after a reboot and only after a reboot. Obviously this gets annoying because of all the windows I have to reopen.What I've tried when the start menu stops working:
1. sfc /scannow - this doesn't show any errors 2. Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"} - the process finishes but the start menu doesn't start working anyway
I really hate restarting the PC when this happens.
For those of you who can't get the Windows Start menu in build 10074 to appear or work when you UPDATE from build 10061 it WILL work if you revert back first to build 10049 and then update.
Activate windows and re-boot -- now it will work. Ensure Windows is activated after the re-boot but activate BEFORE reboot.
(Another good reason for keeping loads of backup images).
You can also now hide system icons again as before too. Don't forget to clean up disk space by using Disk cleanup in properties in file manager -- you can get rid of Windows.old if you don't want to revert back again --in any case I think it's better to RESTORE a previous version from a backup image if you must restore windows.
I am running windows 10 PRO x64, from time to time , i can't find a pattern , the start menu button decides not to work at all, i click it , nothing happens , i hit windows key on my keyboard , nothing happens. The solution is windows explorer process restart.
My start menu stopped working several weeks ago and I have been trying all the suggestions found of the various forums with the exception of reloading Windows 10. It looks like Microsoft should be responsible for publishing a solution to this problem realizing how many people are having the same trouble.
I upgraded to Windows 10 from 8.1 about two weeks ago. It worked fine for a few days then the problems began. When I click on the start menu button, I get a critical error message saying "the start menu isn't working; we'll try to fix it the next time you sign in."
I clicked the shut down button attached to the error message and shut the system down. I restarted and went to my desktop again. I tried the start menu button and received the same error message. I was able to log on to my son's desktop on the same computer. The start menu works on his desktop. I ran the SFC Scan and received the message that there weren't any integrity violations.
I then tried to revert back to Windows 8.1 from the settings menu. I received the following error message: WDF_Violation. It restarted my computer, but could not take Windows 10 off and put Windows 8.1 back on. Every day something new happens. Now I cannot shut the computer off. I use the power button and select shut down. It attempts to shut down but it brings me back to the login window. I can't get rid of Windows 10, can't get Windows 8.1 back. I'm stuck with a crippled Windows 10.
My laptop is LENOVO G510. It came with windows 8 single language. I upgraded to windows 8.1 single language a year ago. I updated it to windows 10 home by triggering the update. The upgrade went successfully. But the problem now is the start button, applications in the taskbar(only right click) and icons on the taskbar on the right side(time, battery, wifi etc) are not working. They work if I click them after a gap of ten minutes. But if I click them for a second time immediately, they won't work.
I got a message box showing "startmenu and cortana are not working, it will be fixed the next time you sign in". When I sign out and sign in, there is no change.
I upgraded to Windows 10 from 7 and I notice that some of the "Start Menu" functions do not work.
For example:
- When I use "Pin to Start" nothing gets pinned. - When I try to use "Don't show in this list" under the "Most used" section the app still remains showing. - When I go under "Settings > Personalization > Start" screen and turn OFF "Show most used apps" this section is still visible under the "Start Menu".
How I can fix these issues and get the "Start Menu" working properly again?
