Startup Repair Loop - Blue Screen
Sep 29, 2015
I've been using Windows 10 for few weeks now and it's been really good.
8GB Ram
1 TB Hard Disc
Asus Motherboard
i5 processor
Used the PC as I would normally do and shut it down last night. Recently installed the latest update for Win 10 as I recall. Otherwise no new changes or installation to the system.
So now when I switched it on its showing Automatic Startup Repair and it diagnose the PC but fails every time and shows a blue screen of startup repair where I can:-
- reset PC (reinstall but this fails at 36%)
- system restore or image restore ( but can't use either)
- startup repair (doesn't work either)
- command prompt (tried sfc/scannow and they won't allow me to do so unless I restart but keeps getting same error.
Tried unplugging the hard disc etc but same old loop again.
View 1 Replies
Similar Messages:
Nov 1, 2015
So i found a possible repair on fixing the current situation o the infinite loop from this forum [URL].... around step 13 it said"If any one of them are 0 bytes, then you should stop what you're doing now and seek an alternative method of recovering your system, because Windows cannot function with a 0-byte size registry hive ". I have 0 as my "RegBack" values and i can't find an alternate .
View 4 Replies
Aug 25, 2015
This afternoon my wife was doing something on the computer, got stuck, and rebooted. Once she rebooted a screen popped up into a repair diagnostic screen and said it was diagnosing the error to repair it. Only problem was that it didn't repair anything and the options that were available were all tried and nothing fixed this infinite loop issue. Luckily, I backed up my system with Acronis TrueImage so as we're speaking my PC is being restored. Windows 10...
View 3 Replies
Mar 27, 2015
During startup automatic repair launches, restart ensues, that's the loop. The error mssg is WDF violation which it seems is related to iTunes. I just can't get out of this loop to do anything about it. I don't have a boot disc. Safe mode is what I would like, but that doesn't work.
View 8 Replies
Nov 14, 2015
So I was having a problem with my laptop stuck in a "Diagnosing Your PC" loop and then it would say, "Bad_system_config_info", and start the loop over again.
So I booted from a Windows 10 USB to repair/reset it with the "Keep My Files" option. Since then, it's just been stuck on a blank blue screen for the last 20 minutes.
Is this part of the reset process or did something go wrong?
View 2 Replies
Feb 15, 2016
I woke up this morning to a constant boot loop into blue screen that gives me a memory_management blue screen error and restarts then occasionally gives me a driver_corrupted_expool blue screen.
It tries to start up automatic system repair which fails and works very rarely. Once i am in the system repair screen i try the startup repair and it just doesn't do anything and redirects me back to the blue screen boot loop. I had restarted my PC this morning after it was working and then it just randomly started doing this boot loop.
I need fixing my issue with a bootable USB program i can use to fix the drivers or something. I need every other option other than reinstalling windows because i have tons of files i need on here.
View 16 Replies
Aug 12, 2015
Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
View 1 Replies
Feb 28, 2016
On start up I get the computer needs to restart and then goes into the loop of restarting from a blue screen, I can get F2 which is the Bios screen but thats all, I can see reboot on this but do not have anything to reboot with as I upgraded from win 7.
View 4 Replies
Aug 11, 2015
Last night I was watching a dvd on my desktop when all of a sudden a blue screen came up with a frowning face and said that "Your computer ran into a problem and needs to restart, its collecting info and will restart." It happened quickly so I didn't see what the error was but now my PC is stuck in a loop where it restarts and loads into an empty blue screen. It stays on that blue screen for a minute or so and then restarts again. I tried going into my BIOS or starting in safe mode but my PC won't go into them.
View 9 Replies
Feb 10, 2016
I recently purchased an intel NUC6i5SYH kit PC and fitted it with the following RAM and HDD.
Samsung 500GB 850 EVO M.2 SSD: Amazon.co.uk: Computers Accessories
HyperX Impact 16 GB 2133 MHz DDR4 SODIMM Memory Kit (2 x 8 GB): Amazon.co.uk: Computers Accessories
I installed a copy of windows 8 that I owned and then upgraded it to windows 10. It was working fine for a couple of weeks, and suddenly it had and error and is stuck rebooting itself with a blue screen error.
The error appears to be different every time but the ones I have seen repeated are "WHEA_UNCORRECTABLE_ERROR" and "MACHINE_CHECK_EXCEPTION".
I can get into the BIOS and that's about it. I can't find a way to boot into safe mode and when I try and install a fresh copy of windows 10 via USB created from microsoft i still get a blue screen error after a couple of seconds.
View 1 Replies
Mar 5, 2016
Booting loop, shutting down before you can reach the bios. Originally a response on this topic: [URL] .....
I have the same Problem here with my gigabyte z97 hd3 v2 motherboard in my PC. I had this problem one time before, then I tested everything 'literately everything' and I was done with it after a week of testing. I did put everything together and turned it on.... It Worked ! but how ??? I don't know.
[URL] ....
View 1 Replies
Jan 12, 2016
I built a computer a few months ago using:
A Gigabyte Z97X Gaming G1 Motherboard
An Intel i7 4790K CPU
16 GB DDR4 Patriot Memory sticks
Samsung EVO 240GB SSD
Nvidia 256 GB Graphics card
Corsair CX750 Power supply
I immediately bought Windows 10 for it, and for the most part the computer worked fine the last few months. Every once in a while I would get a "Driver Stopped Working but has Recovered" that messed up the Windows control bar and required a restart to fix, but that stopped happening eventually with updates. I still got BSoD's from time to time, including "faulty hardware corrupted page."
Today I got a BSoD when I was logging in called "DPC Watchdog Violation," which I had seen before I think so I figured it would just restart and be fine. However, now I cannot restart the computer, because after the Gigabyte motherboard logo, all I get is a blue screen that flashes on and off quickly. It is just a blue screen, sometimes with a dot in the middle. No matter what I cannot get past this infinite flashing screen, even in safe mode. Commands from the keyboard do nothing once I reach this screen although I can the mouse around. I can enter the special Windows control menu before getting to the flashing blue screen, but nothing has worked from there
Things I've tried:
-Disabling restart after BSoD -- no effect
-Restoring system image -- error, then no effect
-Resetting Windows -- no effect (although I've lost all my applications now)
-Removing my graphics card and plugging my monitor directly into the motherboard -- no effect
-Updating BIOS -- no effect
Currently trying to figure out something I can do in the registry. My last option is completely redownloading Windows 10 without saving files, but I'm not confident that will work given everything else I've tried.
View 3 Replies
Jun 22, 2015
I tried to use lumia software recovery tool as well but it said software package not available for this phone. How can I resolve the problem?
View 1 Replies
Feb 24, 2016
I returned home from work today to find that my computer won't boot. Great, it's going to one of those weeks... After the bios screen and the windows 10 logo, the computer hangs on the following screen, blue background with the spinning white dots. It looks like it's trying to log in, but it gets stuck. The dots never freeze, or at least not in the hour or two I've left it- it just keeps spinning and trying to log in. Before I go further, I'll give you some specs:
Homebuilt Windows 10 desktop, up to date (upgraded from w7 months ago)
Gigabyte z87x ud3h mobo
Haswell i5-4670k
Nvidia 780ti
8gb ram
Ok, where was I. The strange part about this is that everything was working fine yesterday, and I didn't really do anything since then. I upgraded from W 7 to 10 months ago and it's been working fine. There were no windows updates yesterday (Feb 22nd), and I didn't install any other driver or system updates. In fact the only things I did install were the Steam VR test and a game on steam. There's nothing else I can think of that has changed since it was last working.
Now, onto what I've tried. I'm at a bit of an impasse here because I can't really get the computer to do anything. Booting into bios works, but that's about it. I can't get into safe mode (Due to W10, F8 doesn't work, can't restart into it from desktop, or from login screen). I've messed around with cables inside the tower, plugged and unplugged hard drives. In the course of restarting many times, I got a "bios corrupt" error, after which it started recovering into the secondary bios (losing all my OC settings and other bios settings). But the problem persisted. I then tried updating my bios, but I keep getting "invalid file" messages when I try to update from bios/Qflash. I also don't not have a W10 recovery stick (which I suppose I should have had around? I can't just download this somewhere huh?).
View 3 Replies
Mar 14, 2016
I built my very first PC in the weekend. Everything was working fine, but after a restart, I had an error message saying something along the lines of "Windows couldn't start". I then had several options where I ended up choosing something like "Start Windows from a version that worked" which erased like half of my programs and many of my drivers. I then proceeded to reset the computer entirely and restarted.
Now, the computer is working again (as it were before) and I've installed everything again, including all the drivers (I hope). However, when I restart the computer, I get a blue screen that says: "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll start for you. If you'd like to know more, you can search online later for this error: BAD_SYSTEM_CONFIG_INFO. It then restarts and works perfectly. This only happens every approx. third restart, the other times, it boots just fine.
I bought Windows 10 Home on a USB which I used to install on my new SSD. All the drivers should be up to date. What to do?
Components
Intel Core i7-6700K 4.0GHz Quad-Core Processor ||| Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler ||| MSI Z170A KRAIT GAMING ATX LGA1151 ||| Motherboard Kingston HyperX Fury Black 16GB (2 x 8GB) DDR4-2133 Memory ||| Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ||| Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive ||| MSI GeForce GTX 980 4GB ||| NZXT S340 (Black/Blue) ATX Mid Tower Case ||| Cooler Master 750W 80+ Bronze Certified Semi-Modular ATX Power Supply
View 2 Replies
Mar 27, 2015
My Lenovo desktop locked up and I rebooted. First it went in to an endless reboot and after several tries I got the Lenovo start screen and then a blank BLUE SCREEN. The mouse and keyboard work. I updated to 10/10.1 over the net, no disk.
View 1 Replies
Aug 10, 2015
My pc is unable to start-up after attempting to reset it(fresh reset). It is in a restart loop and when I try to turn it on the Windows 10 logo appears but then a blue screen appears saying "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we will restart for you." This then lets the PC restart and this restart process happens again. I have tried pressing F8 while it boots up to try to get it into safe mode but had no luck.
View 1 Replies
Sep 21, 2015
I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where the option panes appear.
While I did purchase the computer myself originally, it was purchased for the use of my church group, and two weeks ago came under the care of my co-deacon and friend. So, let's just say there is no recovery media now for Win 7 or Win 10. I can create a recovery disk here at home from one of my local Win 7 systems, but not sure if that will work or not.
I'd be perfectly happy to un-install Win10 from the machine, but there doesn't seem to be a way to get to the recovery partition... all F-key options have been tried.
This is a Core Duo processor.
View 2 Replies
Nov 1, 2015
So when I'm trying to log on, my computer does the whole automatic repair thing, but constantly loops. Now, I know this has been notified before, even for windows ten, but it seems I just can't fix it. All the solutions on the articles I've seen don't seem to work .
View 6 Replies
Jul 29, 2015
Although, the upgrade this morning initially was successful - it did reboot into Windows 10. When I restarted the machine, it's now stuck in the setup repair loop. None of the options seem to work, even if I try and have it reinstall windows while keeping my files, it still restarts and goes back to the setup repair. I really don't want to do a clean install as I didn't make a backup of my files (which I will always do from now on).
View 1 Replies
Sep 30, 2015
Recently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.
View 3 Replies
Oct 30, 2015
I have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
View 9 Replies
Dec 8, 2015
have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.
Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.
Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.
Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.
The advanced options gives me six choices.
1 System Restore, but there are no restore points found.
2 System image recovery, but I do not have an image disc .
3 Startup repair, starts the process all over and does not find the problem.
4 Command Prompt, appears to open a working command prompt.
5 Startup Settings, Gives me a non clickable list of options but just continues the loop.
6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.
The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.
View 6 Replies
Jan 10, 2016
Obviously I can't click on anything or type anything because the loop is constant. I've been reading forums etc for the past couple of days for a fix for this Automatic Repair loop..nothing that would work and I notice many others the past year also never found a solution.
I burned on a dvd a Windows 10 bootup thing- as suggested by someone. That doesn't stop the loop either- and yes, I did get to the page via F12 that allows to change it to boot from the DVD etc.
View 9 Replies
Aug 7, 2015
I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.
I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.
Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.
Config: Intel I7 with 16GB RAM. dual boot with Ubuntu
View 10 Replies
Sep 8, 2015
I keep getting the "Automatic repair" at boot time and then it diagnoses and later it says it failed.
I've checked several forums now regarding this error, I've tred the following :
1. I tried setting the recoveryenabled to No in using bcdedit. No use.
2. Tried rebulding bcd, No use.
3. Tried resetting by choosing "keep my files" option{Because they are important and I've several programs installed which i don't want to lose).
4. I did chdsk on all drives.
5. Even though I've restore points, it says no restore points found.
View 1 Replies
