Stuck In Tablet Mode
Dec 12, 2015I have a Toshiba Click 10 lx0w-c-104 that is stuck in tablet mode, how to revert to computer mode.
View 2 RepliesI have a Toshiba Click 10 lx0w-c-104 that is stuck in tablet mode, how to revert to computer mode.
View 2 RepliesI have a Cherry Mobile Alpha Morph that works without problems aside from the fact that, when I undock it from the keyboard, it doesn't detect that it should now be in Tablet Mode. I have to manually go to the Action Center and toggle it there. Same with docking it back. I have already checked my settings and I didn't disable Tablet Mode either.
how I can resolve this? I just want to seamlessly dock and undock the tablet and it should switch to tablet or desktop mode respectively.
I don't know if it's relevant but the OS is Windows 10 Home Single Language.
I selected tablet mode, and I have no way of going back that I can fine. My start button does nothing(which was the original problem that I was trying to resolve). All I have is Control Panel. This has definitely been the most challenging version since 3,1...
View 2 RepliesWhy does my computer go into tablet mode without me putting it there.
View 2 RepliesI know I can use settings, but that is tedious (too many steps). Would there be a one click (or double click) way to change this (toggle it?).
View 9 RepliesI'm trying to understand why I would want to use tablet mode. Apart from the minimize, maximize and "x" buttons found in desktop mode. Aren't the modern tile apps that you can launch straight from the start menu in desktop mode, exactly the same as the ones in tablet mode? Apart from the apps being full screen.
If so, I'm thinking I may as well just stay in desktop mode and launch the apps from the start menu in desktop mode?
When I open my start menu, it opens on tablet mode. My tablet mode is turned off.What is happening: [URL] ....
View 2 RepliesInteresting, once I installed my new graphics card I finally setup my second monitor to test the multi monitor settings - and one thing surprised me...
Tablet mode is disabled when multiple monitors are being used. I suppose that makes a lot is sense, I just wasn't expecting it.
So I updated my tablet from 8.1-10. There were some issues so i reinstalled some drivers and the issues continued so i did a factory reset. The reset stopped halfway and wont continue. The screen is mostly blank unless i fiddle with some things and a screen comes up asking if I want to continue to update, reset factory settings, trouble shoot, use usb or cd or continue the reset. I have tried the reset a few times but it has not worked. Amazon.co.jp: マウスコンピューター 8.9型Win8.1タブレット・2in1 PC Office付 (Win8.1/AtomZ3735F/2GB/32GBeMMC/Office HB) WN891: パソコン・周辺機器 This is the tablet here. Unfortunately everything is also all in Japanese, which i understand somewhat but am kind of winging it.
View 4 RepliesI'm finding the taskbar to be useful in desktop mode (where I tend to be using more apps), but to be a waste of space in tablet mode (where I want a full-screen experience). Is there any way to set the taskbar to auto-hide only in tablet mode?
View 9 RepliesI have an Acer Iconia Tab W500 running Windows 10 Pro. Everything works perfectly except Windows does not exit tablet mode when the USB keyboard is attached. Is there a method for selecting a device that can switch the PC back into normal mode?
View 4 RepliesWhen in full blown tablet mode (physical type cover completely removed), sometimes I want to initiate the on-screen keyboard to popup, but there is no keyboard icon in the "systray" area. But I can see the keyboard icon in the systray area when I'm in desktop mode.
Is there a way I can have the keyboard icon visible/accessible from within tablet mode??
I have the problem, that Windows 10 is really annoying when it comes to balloon tips when you are in tablet mode. Every few touches, Windows shows non relevant tooltips when you touche the screen, mostly from the start menu. I already have tried to do this:
Code:
Windows Registry Editor Version 5.00[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced]"EnableBalloonTips"=dword:00000000
But that doesn't work. Is there another way to deactivate tooltips (all tooltips, startmenu tooltips)?
For example everytime I swype to the right to show setting tile and then back into the screen, start menu shows an annoying "show hidden symbols" tooltip.
Is it possible to have the apps pane (burger menu top left corner) remain open when viewing the start screen I find this screen extremely dull compared to 8.1, I think the lack of colour has a big impact.
View 7 Repliesi recently upgrade my sp3 to November update and realize some tiles become blurry in tablet mode. ( fine in desktop mode). I tried uninstall and re install intel graphics driver and it didn't fix the problem.
View 8 RepliesIn windows 10, you're given the ability to drag the start menu to a larger size and enable a third horizontal row of tiles. Im an insider, and using 10240 (rtm). Even in tablet or full screen mode, still only the two columns.
View 3 RepliesI write a lot and have Office 365's Word 2013 on my Tablet.I noticed this morning when in Tablet mode, if I opened a file in Word and clicked to edit, the pop-up keyboard wouldn't come up. This was an issue as I was unable to locate it in the task bar anymore.In order to update my file, I was forced to go back to laptop mode so I had the keyboard option available again.
View 6 RepliesIn Win 8.x when using win32 apps in tablet mode, there was an icon to force the keyboard to display, this is gone in Windows 10, how to get the keyboard to display?
View 3 RepliesHow to turn on the automatic desktop/tablet mode switching?
I run W10, the official release, on a Surface Pro 3 with a keyboard cover. Up to now, when I detach the keyboard I get asked if I want to switch to tablet mode, and when I attach the keyboard desktop mode has been automatically restored. I really like how W10 separates the two modes, instead off like W8/8.1 trying to be in both modes simultaneously.
But suddenly this does not happen. When the keyboard is detached, I do not get any question about enabling tablet mode and the Surface stays in desktop mode. If I manually switch to tablet mode, when I attach the keyboard the machine stays in tablet mode until manually disable it.
I have not changed any settings related to this, not deliberately at least.
I have looked at the tutorial on tablet mode in this forum, but it says nothing about automatic switching. I have checked the available settings but cannot see that there is any setting determining automatic mode switch, other than the "Always/never ask me before switching" (which is set to always).
I need Windows 10 to boot directly to a program. Whatever I try .vbs, .bat or just shortcut in Startup folder, it always starts minimized to task bar. When I click on the task bar it gets blown up full screen.
Once I turn off the Tablet mode it starts good, maximized.
How can I solve this so it boot in Tablet mode AND start the program in proper size?
NOTE: I use touch screen but I dont think it maters.
I have a Surface Pro 3, updated for Windows 10.
I have been switching in and out of tablet mode, and I find myself at a point where now my task bar are not working.
For example, when I click on the "Action Center" nothing pops up, or when I click on the WiFi icon, or Volume icon. My start button on my screen, and the physical one on the tablet itself are not working either.
I am trying to get off of tablet mode, but I can't access the Action Center do be able to get off of it.
Surface Pro (original 128GB model). Upgraded from 8.1 to 10. All that went well. I turned off a number of tracking items, wifi sense, and left Cortana off.
I am running into a couple of problems(?) and they may be related. I have my tablet set to go into sleep mode when I close the keyboard cover - original MS keyboard that I bought with the Surface. Even in sleep mode, my tablet gets and remains hot or overly warm to the touch.
I also noticed that it seems to be "eating" a lot of upload wifi band width (according to my TWC tool). I have 200/20 for wireless and the Surface is holding /using 5+ upload consistently. I have cycled it on/off and other than Windows 10 I only have MSO 2010, iTunes, Amazon Cloud Player, Kindle, Chrome, Google Drive and Dropbox installed.
A few weeks back on my Surface Pro 3, I was able to view my desktop and have the tablet style on screen keyboard popup in text fields. Now if I'm in desktop mode, windows does not load the tablet style on screen keyboard when touching an input box and the keyboard icon is gone from the systray. If I'm in tablet mode, the keyboard works like it should, but I'm not able to click on a show desktop icon somewhere. Is there a way to be able to see my desktop *and* use the tablet style keyboard that auto-pops up?
Also in chrome, I am unable to click anything except the X button to close it. So far I'm regretting my upgrade to windows 10!
I recently set up 3 computers for my family, doing clean installs of Win10 for all. On two of the computers youtube is set to restricted mode all the time and can't be changed. The third computer has restricted mode set to off.
Many people have this problem, and in every single troubleshooting thread I've seen the problem is supposedly with Microsoft's family safety feature. All three of my computers are signed into my one MS account. Under the family safety tab there are no other "child" or "adult" users listed.
How is it that one computer can work properly, but the other two have youtube stuck on restricted mode?
So I was trying to restart my Windows 10 desktop computer a little while ago, and accidentally hit Sleep Mode instead. My monitor is dormant, and there are no lights on the front of the computer. I moved the mouse around. Nothing. Pressed a mouse button, still nothing. Hit various keyboard keys, still nothing. Alt-F4 a few times followed by an Enter. Nope. Ctrl-Alt-Del a couple of times. Nada. Hit the power button. Zip. Held down the power button for four seconds, PC shuts off! Pressed power button again, the computer started to power up, but no graphics, no POST beep. Hit restart button, heard fans power back up, but that's all. Shut it off on the power supply, waited 30 seconds, switched back on. Nothing, no fans. Apparently it is off. Pressed the power button, I hear the fans spin up, then it sounds like it shuts down, then they spin back up. Hold power button down for four seconds to shut it off, then unplug power cord from back of PC for 30 seconds. Plug it back in, press power button, and fans spin up, then it sounds like PC goes into sleep mode for a second or two, then fans power back up. Still no lights on front of computer.
I have been a PC tech in the past, so I know my way around a computer. I've tried everything I can think of, save trying to reinstall Windows 7, dancing over the danged thing while singing Bibbidy Bobbidy Boo, or tossing it out the window. This is an older PC, built by me in late 2008. I need a new one badly, but can't afford it right now. I MUST get this one back online!
In the diagnostic startup mode there's no search so I can't run msconfig. Is there another way to do run this? I got to where I'm at now by running msconfig, staying on the general tab (not the boot), unchecking normal startup, then checking diagnostic. No matter what I've tried (including combing this forum and searching online) I still can't get out of diagnostic startup. There are other things going on with my PC, such as at least one virus, the Trojan Zeus Banker. I'd like to try a couple of more things before I put my PC in the shop and probably pay mucho dinero.
View 1 Replies