I have a Windows 10 computer, but whenever I try to turn it on. It just gets stuck on the windows logo. I have tried a recovery USB, but it hangs as well on the windows logo.
When I tried doing an automatic repair, it also hung on the windows logo with Preparing Automatic Repair for hours. I am doing this for my friend, and he doesn't want to loose his important files (yes, i know, he should have backed them up).
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Msi motherboard ...
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Its an Msi motherboard ....
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.
Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.
Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.
Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.
The advanced options gives me six choices.
1 System Restore, but there are no restore points found.
2 System image recovery, but I do not have an image disc .
3 Startup repair, starts the process all over and does not find the problem.
4 Command Prompt, appears to open a working command prompt.
5 Startup Settings, Gives me a non clickable list of options but just continues the loop.
6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.
The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.
I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.
I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.
Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.
Config: Intel I7 with 16GB RAM. dual boot with Ubuntu
So I finally made a .iso file for W10 Pro x64 and started installing it. Everything went smoothly my PC restarted 2 times. But when it got to 81% (in total) while "Installing drivers and features" it resterted for the third time and then it started giving me the "Preparing automatic repair" and then "Diagnosing your pc" stuff. I was able to launch the automatic reapair and roll back to W7.
View 2 RepliesDuring startup automatic repair launches, restart ensues, that's the loop. The error mssg is WDF violation which it seems is related to iTunes. I just can't get out of this loop to do anything about it. I don't have a boot disc. Safe mode is what I would like, but that doesn't work.
View 8 RepliesSo I found this issue in my second laptop that running W10TP. I have HP as my first, and ASUS as the second one.
In my ASUS (2nd) I can't booting the laptop without force shut down through hold the power button, because it always stuck at Windows logo. After shutdown and boot again, I succeeded into the lock screen. But it taking too long in the blank screen for almost one minute.
This issue never happened in my HP laptop.
I've tried many methods to find this issue, system scan, virus scan, update installed drivers, driver scan (it failed). And for a couple days it work so well and I'm happy for that, no more stuck at booting.
But the issue come again after many security update for build 10240. The booting is stuck again and BSOD with pfn_list_ corrupted. After restart the laptop I've tried again all the methods that I've did. And then I found so many viruses and malwares from Windows Defender. It's odd for me because it is never happened before, and suddenly of course.
After the viruses were cleaned, the issue is still persist. I want to reset my laptop from settings/update& security/recovery/reset. Is this necessary to do considering W10 will come in 3 days left?
I bought an asus tranformerbook t200(with windows 10 update) on 11 august and was very happy with it.
Occasionally, the laptop couldnt find any wifi networks but that was fixed quickly by just turning the computer on and off, until today.
Today at school(my second school day at university), i had no internet anymore. He didnt find any networks anymore at all. Turning the laptop on and off wouldnt so a thing. So i tried some things, like turning the broadcom device on and off via device manager. That also didnt work. A user in the internet on another topic suggested to delete the broadcom and then reboot, i did it and things only got worse. My laptop didnt recognize the broadcom wifi adapter anymore at all.
Then I tried to format windows(with saving documents addition) which unfortunately failed. After that, i tried to format it and added the option that everything would be cleaned, that failed also. c windows system32 logfiles srt srttrail.txt is apparently the error.
Now if i start the laptop, the asus logo will show but thereafter the screen just turns black. I tried system recovery and even startup repair but both fail.
I have a Lenovo G500 upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stuck in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files) .
View 1 RepliesSamsung RC510 - Got stuck at windows 10 logo when trying to boot into USB.
BIOS Type:PhoenixBIOS Date:January 19th, 2011BIOS ID:03HU.M008.20110119.KSYBIOS OEM:03HU.M008.20110119.KSYChipset:Intel 044 rev 2SuperIO:UnknownManufacturer:SAMSUNG ELECTRONICS CO., LTD.Motherboard:RC410/RC510/RC710
I keep getting the "Automatic repair" at boot time and then it diagnoses and later it says it failed.
I've checked several forums now regarding this error, I've tred the following :
1. I tried setting the recoveryenabled to No in using bcdedit. No use.
2. Tried rebulding bcd, No use.
3. Tried resetting by choosing "keep my files" option{Because they are important and I've several programs installed which i don't want to lose).
4. I did chdsk on all drives.
5. Even though I've restore points, it says no restore points found.
I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where the option panes appear.
While I did purchase the computer myself originally, it was purchased for the use of my church group, and two weeks ago came under the care of my co-deacon and friend. So, let's just say there is no recovery media now for Win 7 or Win 10. I can create a recovery disk here at home from one of my local Win 7 systems, but not sure if that will work or not.
I'd be perfectly happy to un-install Win10 from the machine, but there doesn't seem to be a way to get to the recovery partition... all F-key options have been tried.
This is a Core Duo processor.
So when I'm trying to log on, my computer does the whole automatic repair thing, but constantly loops. Now, I know this has been notified before, even for windows ten, but it seems I just can't fix it. All the solutions on the articles I've seen don't seem to work .
View 6 Repliesi was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 RepliesRecently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.
View 3 RepliesYesterday my computer started up the automatic repair service when i turned it on. It attempts to diagnose the problem and fails. I've run chkdsk on both the boot and regular partitions of my install drive. I tried to repair using an install disk but it says it cant because my install drive is locked. I also tried resetting from within the recovery environment. When I did it got to 8% and then said it couldn't reset the os as it encounter a problem during the reset. I'm running Windows 10 off an SSD.
View 3 RepliesEvery time I boot up my computer it does a repair on my computer then shows a error. The error says "automatic repair couldn't repaiclr your pc. Log file:EWindowsLogFilessrtSrtTrail.txt. I have windows 10
View 1 RepliesI have had this loop for 4-5 hours now, and I have not found any fix for it. I am using build 10240. I have tried reverting back to windows 7, and that failed. Tried start-up repair, that failed. Tried system restore and image recovery, those failed too. Even resetting my pc has failed. I have tried cmd commands, and those also failed. I have upgraded to windows 10 via online from Windows 7, and I do not have a disk or another computer to work with. Nothing has even caused this issue. I just booted my pc like any other day and I was sent into this loop. I have a Gigabyte USB 3.0 powered motherboard.
View 9 RepliesSo I thought I'd try out free version of Avast. Well, after few weeks of getting rocked by popups, I uninstalled it(from programs and features) and rebooted it, thinking life is good now. Hell naw it ain't good now, not at all.
I'm stuck in Automatic Repair loop. Windows attempts to auto repair, tells me my PC didn't start properly, does not boot to safe mode, does not find any restore points, fails to "Startup Repair" and is unable to "Reset this PC"
In command prompt that I can open in that cute lil blue metro interface I get following:
1. Disks are there and volumes are healthy(tho volume letters are wrong my os SSD is D: and storage HDD is C: )
2. sfc /scannow tells me that there is a system repair pending which requires reboot blah blah fml
3. dism ran against D: with /Cleanup-Image /RestoreHealth fails with logs containing few errors(among tons of info logs):
*Error creating registry mapping:COMPONENTS - CIfflineRegistry::Init
*Failed to mount the remote registry
*Failed to set the windows directory to 'D:Windows'
4. dism ran with /revertpendingactions gives me same errors in logs as above
that's pretty much it. So is my registry completely screwed?
I was trying to play a game the other day after not playing for a long time. I hadn't restarted the computer in days. The game wasn't loading properly so someone suggested restarting the computer. I decided to restart my PC. Waiting for it to restart i was met with a Windows failed to start or something like that. I clicked advanced options i first clicked System Restore and of course all the restore points i set every month were somehow gone. Because i waited and waited and waited and suddenly it told me there was no restore points found. I then tried opening up the command prompt and switching to the D: drive because for some reason my HDD becomes D in the automatic repair. But anyways i punched in chkdsk /f. I was surprised at how much it found. I then thought it might actually start now! I restart. It doesn't work. I turned off the computer last night and haven't touched it since.
P.S. I also tried Resetting. That failed too.
I was running the Win 10 build 10074, in the slow ring. I left it unattended for update, which included the newer build 10130. Before leaving, it was at 99% downloaded. When I returned after 30 mins, it was stuck in an endless restart loop.
It restarts within 2 seconds of displaying the Windows logo, when I try to boot from the HDD. If it goes into Automatic Repair, it shows "Starting automatic repair" under the logo and restarts after some time.
But the worst thing is that the same problem occurs, Even if I try to run Windows 10 setup/repair from a USB drive!! (build 10130). It just reboots a few seconds after showing the logo, even when I removed the HDD. I am totally stuck. I am currently running Ubuntu from a USB drive, which is working just fine.
I am not sure what happened in my absence, though it's unlikely that the newer build was installed in just half an hour. The only idea thing that I can think of and have not tried is to try running an earlier build or version from the USB drive.
Getting weird problem with Windows 10 Pro. So few days ago when i ran memtest few hours without error, but after finished test i reboot pc and Automatiic repair started before windows. Is this something with memory ? Memory trigger that error? Or it is software issue? Coincidence ?
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem occurs only when starting system again after shutdown.
My disk is Samsung Evo 250 GB SSD. I run HD TUNE but no errors and CrystalDiskInfo Smart is fine 100% GOOD. Rams are 2x8gb DDR3 Kingston Hyperx 1600mhhz.
Memtest86 not showing errors. So its a hardware related or not?
Windows 10 only makes USB recovery drives. How do I make a DVD repair or recovery drive?
View 1 Repliesrun down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
I upgraded to Win10 about a month agn Friday my pc was stuck in the Automatic Repair Loop. I tried alt+ctrl+del no result. I reboot and pressed F10 the monitor went to sleep mode. When I pressed the on button on the monitor, the Monitor Status reads as follows:
DVI: No signal
VGA: No signal
Auto Switch Source: on
Default Source: DVI
At a point in time, a msg appeared saying "check video cable" so I used the VGA cable on two different ports no success. I bought a DVI-D cable and used it still the monitor is in sleep mode