Synchronize Folders On Same Drive?
Aug 26, 2015Is there any simple way to synchronize folders on the same drive? On two different drives on same PC? On two different networked PCs?
View 1 RepliesIs there any simple way to synchronize folders on the same drive? On two different drives on same PC? On two different networked PCs?
View 1 RepliesAm sorting out hundreds of photos for archiving, need to add them to final folder and delete from the source folder...I have a complete backup on another partition, which I have to copy to at the end of each session to keep them both up to date.....I hear there is an MS program called synctoy not sure how stable this is for W10 or if there is a better alternative...
View 6 RepliesThe inbox is empty and new e-mails don't appear - Have just updated to Windows 10 ...
View 1 RepliesI successfully transferred all my files and data from my old computer (windows 7) to my new computer which uses Windows 10,using "laplink". It placed all the files in "one drive". I set up a local account initially rather than a Microsoft account. So far so good. I then wanted to change my local account to a Microsoft account, which proved somewhat difficult. I ended up creating a new Microsoft account for myself, so I have now got 2 accounts for myself-one local and one Microsoft. In the Microsoft account, however, when I look into file explorer I seem to have lost about 95% of the files I transferred from my old computer. The folders are there but when I click on them it says "folder empty". I would eventually like to delete the local account but am afraid if I do so I may lose most of my photogrphs and music files.
View 10 RepliesI have decided to migrate to Win10 while maintaining my Win7 system until I'm sure (on the same box). Win 10 is installed on a new SSD, Win7 on an old SSD, with all my files held on a 1TB drive so I planned to just save any files I needed, like brower shortcuts on the storage drive.
In Win 10 I have had no issues viewing the files on this drive until today. I have a simple text file for storing information about the migration, and I can open it, but only see an old version of the file. It is fine in Win7. New files and folders I create in Win7 are not visible in Win10 at all now. What am I missing given all the old files created in Win7 are working fine?
E.G. If I boot into Windows 7 and create a folder on the root of the storage drive, called test, then boot into Windows 10 from my other SSD not only can't I see the test folder, I can create a folder named test. I've not booted into Win7 yet to see if I can see that from there.
I was just creating a folder on my C drive (SSD) when I noticed that the attribute is set to read-only. I've tried clearing the attribute many ways using the link below but to no avail. Right-clicking on the folder does not show the option to Take Ownership. how to correct it?
Remove read-only attribute from folder - Windows 8.1
I have a few Windows 10 systems with clean installs (not upgraded) whose C: drives are filling up with random hex named folders; over 50K of them. From what I have read, this could be related to temporary update folders, but they are not being deleted. The folders are named something like "00b332a3dcbf71fb88" and contain 0K of data, but they are extremely annoying.
What these folders could be and if there is a way to either stop these folders from appearing or at minimum, to redirect them to another location not on the root of the C: drive? If these are related to Windows updates, I will not be able to shut those off as these systems are all part of a group policy that keeps them on. I can shut down that policy, but prefer not to have to do that.
I'm trying to access my user folder on a different hard drive, but it takes forever to load and then afterwards does nothing. I think I've already set all the permissions and stuff but it still isn't working.
View 10 RepliesI recently got an SSD, with my old HDD set as a storage. I was trying to move the quick navigation folders on the left of Windows Explorer from the SSD to the D: drive (HDD).
However, with the 'My Music' shortcut, I accidently moved it to just the D: drive, rather than a folder within the D: Drive. This means the 'My Music' now directs me to straight to the D: drive, and when I try and move it, Windows says access is denied.
I plugged in the hard drive from my wife's PC into my own PC (both windows 10) so I could try to recover some files from it (as it's currently not booting into windows).As soon as I booted my PC back up I could see the second hard drive was there but since then I've been experiencing all sorts of issues. I am still an administrator but I just don't seem to be able to do anything - it's hard to describe, but I can't move or change or delete ANY files or folders on my system, I can't move files to or from an external drive for back up, on the desktop the right click menu doesn't come up at all and on files/folders it has no ability to access properties.
Also, whilst most programs still open normally, any Microsoft Office programs just don't do anything at all when clicked on. It's as if I have lost all control over making any changes on my PC.I assumed that the two drives were conflicting in some way so removed the second drive but the problems are still there.
I backup photos from my phone to Google Photos which then automatically syncs them to my hard drive to a folder in Google Drive. The folder containing these images in Google Drive has been included in the Pictures library, but the Photos app doesn't see them and says "No readable photos, videos or folders found." I tried uninstalling and reinstalling the Photos app. The pictures show up fine in Windows Photo Gallery. Does the Photos app has always ignored images in Google Drive or is this a recent development?
View 5 RepliesHow to restore these folders to their original drive after they were moved during sysprep...
View 2 RepliesI have the option "Show recently opened items in Jump Lists on Start or the taskbar" off.
However since the last update whenever I either copy or move a file into any folder windows puts that folder under the Recent group in the taskbar.
On Windows 7 start menu you could have a folder such as EA Games and then sub folders within. For example a folder for tiger woods golf, a folder for say Fifa and so on. It seems on Windows 10 you can only have one folder level. I have tried creating sub folders but all the shortcuts within the sub folders all appear under the one top/master folder when actually viewing the start menu. Am I correct in this observation/restriction?
View 9 RepliesWhen I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesI have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 RepliesI have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 RepliesI currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 RepliesMy laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
So I'm wanting to start with a clean slate on my C: Drive (SSD) by blowing it all away and reinstalling windows. However I would also like to leave my D: Drive (HDD) as it is. Is it possible to do so without backing up my D: to an external drive as I do not have one?
As of my attempts so far the only options I have been given are the ones in my picture attached .....
How do I wipe my C: Drive but keep my D:?