I am trying to restore a Windows 10 system image with no luck. Here is what led up to this situation:
1. Upgraded from Windows 8.1 to Windows 10 when it became available the end of July.
2. Made a System Image (ssd m.2 mounted on the motherboard) after I was to a point where everything seemed to be working fine on 8/12/15 and saved the image to a separate hard drive on my system (E: drive).
3. Updated the bios from 2012 to 2501 yesterday and I was no longer able to boot from the ssd drive. Windows would start to load and then give me an error that no operating system was available. Tried everything I could to get Windows 10 to boot from the ssd drive with no luck (after the initial boot manager reached the point where the operating system should begin to load, all drive activity stopped)
4. Performed a System Restore saving all personal data because I could not see the system image I had created or access the original ssd partition the had original Windows 10 on it in a command prompt from within Windows RE (the drive did not exist).
5. Windows 10 now loads less all the programs I had installed.
6. When I attempt to restore the system image from advanced options in Windows 10 RE, it gets to the point of showing me available images for which there are none showing. I copied the image from the original hard drive to a USB hard drive and to a network location. Windows does not recognize the image in any of the locations.
I read in a thread somewhere that in Windows 10, the only way to restore a system with a windows system image was with the actual OS that created it. Since I did the Restore from the original system image from the recovery partition and not the one I had made the image with I am assuming that is why Windows is not showing any image to restore.
I have a custom built system:
Asus P97 Pro mobo
Intel i7-4790 3.6GHz
32 GB RAM
64 bit Windows 10
SSD - Crucial CT500MX200SSD4
Hard Drives x2 - Toshiba DT01ACA300
How to get Windows 10 to recognize the image. I am going to give it about another hour of research and then do a clean install.
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
I had a Surface Pro 3 running Windows 10 Pro that started giving very poor battery performance and the case was getting very hot.
MS agreed to either repair/replace under warranty but I needed to ship it back.
Before I shipped it back I did a Windows 10 System Image Backup to a USB drive hopeing that if MS replaced with a new Surface pro 3 I would be able to restore the Image to the new unit.
MS has as I thought replaced the Surface Pro 3 with a new one but I am struggling to restore the image to this new one.
It is asking for a recovery Key ?
Am I right in thinking that you can restore the Image to a replacement unit ?
I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,
I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.
adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore.
I created ISO disks for both my 32 bit and 64 bit systems at the MS download site. If I use the ISO disk instead of the Windows Update method, does the install still create the W7 image in case I want to go back to W7 after installing W10?
Also, do I boot from the disk or do I go into the ISO disk and click on Setup?
I have 3 HDD's (2 internals (1 SSD 120 GB and 1 HDD-Sata 200 GB) and 1 external USB HDD (2 TB)). I have installed Windows 10 Pro x64 final οn the SSD 120 GB without problems and i have installed the extra programs that i use, also without problems. Then i decided to make an image backup to the external USB HDD. The image created succesfully. After that, i have removed the SSD 120 GB, installed the HDD-Sata 200 GB and tried to check to the HDD-Sata 200 GB if the Windows image recovery works. I used the Windows installation DVD and the external USB HDD to do the recovery.
The image recovered normally and the HDD works like as if i was using the SSD 120 GB. So my problem now is with the capacity of the HDD-Sata 200 GB which is shown as 120 GB. So any way to restore the capacity of that HDD again back to 200 GB? I don't want to format the disk now, just continue to use it as a backup disk just in case of failure of my SSD one. I know that i cannot use the HDD Capacity Restore Tool, because it is working only with 32-bit systems (which i currently don't have one right now) and even if i use it i don't know if it will restore my disk to full capacity but in a state that requires format from the begin (something that i am trying to avoid).
So in general, my question is how to restore the capacity of a hard disk after image recovery (when you backup to a new hard disk with capacity bigger than the capacity of the disk that i want to backup).
I have a Sandisk Cruzer 64GB USB 2.0 thumb drive and I was wondering if it's possible to create 2 disk partitions and install some boot menu to allow me to choose either the Win10 ISO partition or Surface Book Recovery Image when I boot to USB in UEFI?
I have been trying to fix my windows 10 corrupted files but I have been unabled to recover it. I tried every possible way of recovering using DISM commands, but to no avail. I tried also the sfc /scannow but as usual this command hardly ever fixes issues regarding corrupted files. I have tried using dism in several ways by specifying the location and the install.esd file from my usb flashdrive windows copy and even tried the health commands on powershell..still wont work. The first command I tried and for all of them I get the same error message, which looks like this:
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see [URL] .....
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
I have heard people saying that I need to refresh my pc as a last solution and I don't want that since I have all my settings and programs migrated from the upgrade...
I have been reading on the web that there is a way of specifying the packages missing via command and then download them manually..
Whenever I try to create a system image or run recimg I get error 12289 and the backup fails. System protection is turned on and maximum space used is set to 20%. I have no third party backup software installed and this is a real not virtual machine.
I successfully created the image to an external drive, apparently. It took some time and the moving activity bar moved to completion.Opening the drive there is no sign of the image altho there is one I created last year. Also altho it said that so much of the drive would be used the resulting free space seems the same as before the creation.It is not in my C drive so what has happened?
I had updated windows 7 home premium to windows 10 then when the update was complete I created a backup image of the whole system.... and saved in an external HD. then my fixed disk died, replaced by a new fixed HD I can not recover the backed up windows ten image from my external HD ... is that due that when replaced the new HD I am contrived to recover the system with windows 7 home premium and windows 7 do not recognize the backed image of windows 10?
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10
I am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.
How do I set up an external HDD to be used for system image backups? For example, specify how many images to keep, schedule the backup, etc. also, can I use the drive for anything else other than image copies?
I did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do. I have tried to do create a image on two usb flash drives but i keep getting the same error from windows that this is not a valid location .
I have just created a system image to disc, and I would like to know how I go about verifying that the disc is working. When I say disk it took 5 hrs and 19 disc's to finish.
I recently purchased a Lenovo 900 ultrabook, and proceeded to upgrade from Windows 10 Home to Windows 10 Pro (using a Windows 7 Ultimate product key). Now that I have done this the factory "restore" does not include my upgrade and I am concerned that I would lose it if I ever needed to restore.
So, I am trying to do a full system image backup to a flash drive, but Windows 10 says that the drive is not allowed for this. I can create the USB drive as a network share and get the backup to work using that method, but I don't really trust that it will work properly.
How to do a full system image backup to a USB drive in Windows 10 that you trust will work in the case a restore is needed?
I've not partitioned a hard drive on Windows 8/8.1. In fact, I've never partitioned a hard drive on Windows 7. The last time I partitioned a hard drive was Windows XP to dual-boot two operating systems. I'd like to partition the hard drive on my laptop in order to save a backup of my system onto it, as I don't have an external drive right now. Any detailed, step by step process to partition my hard drive and then back up my system onto it? I have 350GB of free space.
Before I upgrade to Windows 10 on my Windows 7 desktop I'd like to know whether or not there is a built in create a backup system image?
Once my Windows 10 upgrade is running properly and before adding in any new programs I wish to create a backup system image
--- I know I can use a 3rd party program and I am use to Macrium Reflect on my Windows 7 but I wish to know whether or not there is a built in create a backup system image utility
So far I have found which I will do while my Windows upgrade is in pristine condition
I have just upgraded to Windows 10 from windows 7 home edition, I have problem while creating system repair image disk. I have inserted a blank dvd but while the create image app is running it shows error message called Unspecified error,
