This problem happened for me last week but after a system restore it was seemingly fixed. After having to restart my computer again however, it's come back: every time I put Windows in sleep mode and turn it back on, it instantly shuts off. Not even a blue screen, it just turns off before the screen has a chance to even turn on.
View 1 RepliesThis issue's surfaced for me since this morning. Whenever I put Windows to sleep, either manually or closing my lid, it shuts down the instant I start it back up.
View 4 RepliesI upgraded from 8.1 to 10 and had no problems for a while until I began using sleep mode. About every night or two when in sleep mode, my system shuts down. I'm not here when it does so I don't see a blue screen and appear to have no other problems. I used WhoCrashed and get this info every single time I check it.
crash dump file: C:WINDOWSMinidump100815-12343-01.dmp
uptime: 14:28:45
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFE001FD59D710, 0xFFFFD001F6446990, 0xFFFFE002062B69E0)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.his appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
I can build computers but I suck at figuring out problems like this. All the drivers are up to date and since this started, Nvidia has had 3 driver updates that I've tried that make no difference.
a few days ago I updated my 64 bit windows 7 ultimate to windows 10 pro, and ever since then whenever I put the PC to sleep and try to wake it the PC tries to start but the screen remains black and after a while a BSOD will appear (now with a sad face on it... amusing...) stating driver_power_state_failure, it happens consistently and only under those circumstances (at least for now) I tried running the driver verifier (as explained on other posts BSOD on sleep, DRIVER_POWER_STATE_FAILURE - Windows 10 Forums) and followed the tenforums tutorial, but nothing in particular happened
I use the sleep function a lot and I cant have it like this.
System: Intel NUC 54250WYKH
Monitor: Acer T232HL (1920x1080)
OS: Windows 10 Pro (clean install)
When my NUC wakes from sleep mode, existing windows are sized and positioned as if the display resolution had changed to a much lower value (e.g. 1024x768) during sleep but was restored to 1920x1080 after waking. The windows are smaller and positioned in the upper-left corner of the display. This happens with any program I have running when the system goes to sleep (e.g. File Explorer, Visual Studio 2015, etc.).
This problem didn't happen with Win8 on the same computer.
I restored my system back a few days because my OS just started falling to pieces with errors. That issue is fixed, but now my windows isn't activated anymore. I have had no hardware changes, since i upgrades from windows 7 except changing the driver for my Ethernet adapter. My error reads Error code: 0xC004C003
View 9 RepliesAfter I upgraded from Windows 8.1 to Windows 10, my sleep feature quit working properly. There was a point in time a couple months back it did work, but since I hardly use it I didn't notice a problem. Recently I decided I'd start using it, and that's when I noticed the problem. When I go to sleep mode, it goes to sleep, but than when I bring it out of sleep mode it just restarts. I don't get any kind of error message at all, and as far as I can tell my power settings are set right. One suggestion I found suggested to revert my driver for Intel Management Engine Interface from version 10 or 11 to 9.5. I just reformat my hard drive and start over. I'm trying to avoid that at all costs. I see suggestions on the settings in BIOS. Which settings in particular should I look to change?
View 9 RepliesI recently upgraded to win10 (yay), which caused a slight issue for my laptop. When I let it enter sleep mode, it would automatically wake up once every few hours or so for "important activities" or something along those lines. I did a google search and managed to find a solution via command prompt.
All was good until I recently noticed that my laptop has stopped going into hibernation/sleep properly. As far as I can work out, when the laptop is set to sleep (through power button settings, windows menu or hotkeys), it goes into sleep mode but then switched off the power supply.
I installed windows 10 technical preview yesterday . I found a problem with system restore. It goes through everything normally but after it reboots I get an error. In the details it says:
System restore failed to extract the original copy of the directory from the restore point.
Source: %ProgramFiles%WindowsApps
Destination: Appxstaging
An unspecified error occurred during system restore. (0x80070057)
Maybe I have a misunderstanding of how System Restore works. Yesterday I uninstalled a program that I'd like to now get back. The company that made the program no longer offers archive downloads for that program in particular. Today it occurred to me that I could do a System Restore to when the program was still on this laptop & all would be returned as it was.
The first 2 times I tried was a total fail for returning the program but when I went back to a week ago it was there. Something is missing & it errors asking for the old install software that doesn't exist anymore (the program was purchased it 2008).
My computer (an Asus Republic of Gamers) shuts down when in sleep mode. More precisely, I put it in sleep mode (in 1-2 seconds), but when I open the lid or press a key on the keyboard to wake it up, it starts from scratch, as if I had shut it down.
I tried deactivating Intel Management Engine Interface in the Device Manager as I saw it could be a reason for my problem, but it doesn't solve it. I reinstalled Windows from scratch (from a USB key) and the problem is still there.
I only have the computer for less than a month and I think it worked fine at the beginning.
When I close the lid of my laptop, put it into sleep mode, or put it into hibernation mode, the laptop basically shuts down. The power light flashes on and off, but when I reopen the lid or press the power button to turn it back on, the screen flashes grey and reboots.
What I have tried:
Changing all of the advanced power options
Resetting my laptop (to before the issue started occurring)
Restoring my laptop to factory settings
Redownloading windows 10
Disabling the UEFI (BIOS) setting that allows the computer to be turned off to save power
Updating the drivers that were suggested on the windows eight forums
Downloading the chipset driver from Asus
Downloading the ACHI Link Power Management and trying all the settings
What I've done in the command prompt:sfc /scannow then Dism /Online /Cleanup-Image /RestoreHealth.I also tried the chkdsk command but there were no problems found
When I started noticing the problem:After I downloaded VMware's player and created a virtual computer with Ubunt
I put my pc on sleep mode about everyday, but when I try to wake it up, it completely shuts off. I usually have sleep mode on overnight. I've check and messed with some of the Power Option, but they all seem normal.
View 4 RepliesWhen I press the sleep button in Win 10 computer shuts down
View 1 RepliesI have a very annoying problem with my laptop (asus G751-JT) where if I click sleep on start menu,press the on button(not hold just press so it goes to sleep),or even close the lid,it will automatically shut down.
View 1 RepliesAfter upgrading to W10 my pc keeps waking up from sleep mode. I've disables the reboot and scan in to wake the pc in task scheduler, I removed the wake on lan, mouse and keyboard from waking it in device manager, and I've disabled what I can in power management. It still wakes up a few minutes after going into sleep mode..
View 1 RepliesI always put my computer to sleep at night before bed, after I installed W10 whenever it wakes up I get a grey screen with the number 90 in the bottom right corner.
View 1 RepliesBoth my tablets are requiring a password after waking from sleep. I have set everything I can think of to not require it, but it still asks. I am signing in with my live account, is that why?
View 19 RepliesSince I upgraded to windows 10 from windows 7 my pc every night wakes its self from sleep mode. I did the command prompt and it said a wake timer was waking my pc, I have been unable to find a wake timer. How to fix this?
View 3 Repliesi am having a strange issue with my windows 10 pro version, It was working fine until the 3rd cumulative update. Now my lap never goes to sleep. When i sleep the laptop it goes to sleep and then automatically wake after 30 to 40 sec, and sometimes even 4 to 5 minutes. I have troubleshooted the power option, removed all the scheduled events but nothing works. On searching the command prompt with powercfg lastwake command it shows The POWER BUTTON.
View 2 RepliesI have windows 10 pro 64 bit. I am running a 120gb SSD for my OS and a 1.5TB HDD for media and games. Whenever I put the computer in standby or sleep mode the HDD is not recognized when the computer wakes up. Upon restart the HDD is recognized and everything is groovy.
View 1 RepliesWhen I wake my pc from sleep it gets a blue screen and crashes. Then it restarts. Here is the error code.
View 1 RepliesMy pc monitor won't turn back on once it turns off in sleep mode
View 1 RepliesI put my PC to sleep and when I wake it up, I'm getting no display on my monitors although the PC itself wakes up. I reboot the computer and encounter a BSOD "VIDEO_TDR_FAILURE (nvlddmkm.sys)"
I recently updated from Windows 7 to Windows 10. Nvidia drivers have been updated as well.
Uploaded zip file.
I'm getting a blue screen advising "ATTEMPTED_WRITE_TO_READONLY_MEMORY" a couple of seconds after my computer wakes from sleep mode. It's not sporadic as it happens every time.
I've downloaded the log collector and attached the ZIP file to this post. First time poster so I hope I've done it correctly!
Never had a bsod occur on this machine. Need determining the cause of the situation.
Attached is the debug zip folder...