Installed Windows 10 (free) off Microsoft over Windows 7 home premium. System rebooted, started opening windows 10 and I received an error about system ra into a problem and needs to reboot.
Error was System_Thread_Exception_Not_Handled. After about 20 reboots and same problem error, gave up. Can't get into my system!
Downloaded the free Windows 10 upgrade on computer running Windows 7. Am now stuck in the above error loop. I have read the answer that requires a reboot disc and of course do not have one. I've tried reset with no success, and various troubleshooting options with likewise. Don't know much about computers, how to get back to windows 7? The system restore and go back to previous build options don't work either.
View 11 RepliesI kept getting encouragements from Microsoft and IT guys to upgrade to Windows 10. Unfortunately, I did not check with Dell whether they recommend the upgrade. It turns out that Dell does not recommend my model (XPS 8500) to be upgraded to Windows 10.
I went through the upgrade 2 days ago and yesterday I ended up with "System Thread Exception Not Handled" error. One of the solutions for resolving this error, after much googling, is to download Win 10 drivers from Dell. Well, that's how I found that Dell doesn't recommend it. There are no drivers. Here's exactly what Dell says:
Product not tested for Windows 10 upgrade.Dell is not testing or developing Windows 10 drivers for this product. If you choose to upgrade, some features, applications, and connected devices may not work as expected.I' stuck in a loop with this error message and can't load. How would I undo the upgrade? I get the feeling if I choose to stay with Win 10, I would be beset by a slew of compatibility issues which I would rather not encounter.
My Specs::
(1) Dell XPS 8500; 3.4 GHz; 12 Gb RAM; 64-bit OS; 2 Tb HD
(2) Windows 8.1 2013; Kaspersky Total Security 2015 15.0.1.415©.
Windows 10 system thread exception not handled error, then it tries to restart because of the fault but instead it shuts down, then if you switch it on again it tries to start for a while but goes off, no way event if you keep on doing that.
View 1 RepliesI am using windows 10 from 1st of august by upgrading from win7ultimate,thought of clean install at a later time. After a day,the system stuttered while watching videos through vlc,or at youtube(maybe by just by watching).
After some days the desktop seemed to be refreshing again and again at startup, last night after refreshing loop, pc restarted itself,attempting automatic repair and restarts or boots again and again and error shows that [system thread exception not handled] and is on a boot loop.
I tried to use through installaton by usb for repair or clean install but the same problem is seen there too, what to do?
I had the above message on the Blue Screen and when it automatically rebooted, it rebooted 4 times before going into a black screen. I have a (crappy), fairly new Dell Inspiron 3520. I was running Windows 10 on it (yes, I was stupid enough to install it on a laptop that wasn't tested by Dell for Windows 10, that's pretty much my life). It's been fine up until today when that happened.
View 2 RepliesSeveral weeks ago I booted my computer and had a bsod on the windows logo. Spent several hours trying to find anything before just nuking and reinstalling. It just happened again and I might cry. Bsod on every boot, including safe mode and automatic repair.
Best guess is it is video driver related, but I can't get in to uninstall. Both times it was the most up to date drivers available. I've disabled the discrete video card via bios. Last time I had to pop out the hd and mount it on my desktop to recover files and wipe.
Windows 10 pro
Acer Aspire 5560G
Upgraded to Win 10 from 8.1 recently and it was working fine. This morning when I tried to boot it won't. Stays stuck in a 'your PC ran into a problem' loop and shows a 'system thread exception not handled' error.
I hadn't got a chance to create a recovery disk (the Internet tells me I need this to be able restore without losing my files and data).
I have a Win 7 laptop which I'm typing this on but which hasn't received its Win 10 update so that I can create a recovery disk on it.
I updated to Windows 10 last week from 8.1 on my Samsung laptop. The update went fine but the restart left me with the message "System THread Exception Not Handled". The only way to get my computer to reboot was to restore it to the original 8.1 version.
I am brave so I decided to try the upgrade again this morning following the "must do" steps for after the upgrade as outlined in this article: How to 10 things to do after installing Windows 10 - Microsoft Community
The upgrade went quicker this time but with when restarted I got the same message. The only difference this time is the fact that I had created a new restore point after the upgrade. so I am still in Windows 10. I checked for all the updates, drivers, etc and found nothing new. I am set to reboot at 3:00 am tomorrow and am fearful that I will have the same result again.
Today I've upgraded win 8.1 on my laptop Acer 5738DG to win10. Whole installation passed w/o issues and upon finalization of installation lappy shutdown itself and each boot end with BSOD "system thread exception not handled".
Even when I'm trying to start clean install from boot-usb it wont load installation but always end up with BSOD.
Okay so I have been having some blue screen issues. I have tried many troubleshooting solutions but I cannot seem to find out what is causing these issues and I need a hand. Minidump info included in link. Ran memtest today with 8 passes 0 Errors.
View 8 RepliesToday i've upgraded win 8.1 on my laptop Acer 5738DG to win10.Whole installation passed w/o issues and upon finalization laptop shutdown itself and each boot after ends with BSOD "system thread exception not handled".Even when i'm trying to start safe mode or clean install from boot-usb,it wont load but always end up with BSOD.
View 1 Replies2009/2010 Acer Aspire 5738DZG
Intel Pentium T4400
ATI Mobility Radeon HD 4570
15.6" screen
Windows 10 x64
When the laptop is turned on, a BSOD appears with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED.
It automatically restarts after around 5 seconds. F8 does nothing.
I have booted with a Windows 10 USB flash drive and it shows Preparing automatic repair before showing the BSOD again.
So 4 days ago i decided to build a new PC. For my GPU i decided to get a PowerColor Devil 13 Dual Core r9 290x (the cause of the problem), which as i understand, is the same as 2 290x's crossfired. I set up my PC with Windows 10 pro and the OS had installed the r9 200 series driver. Windows messages started popping up, saying that the vidoe driver has stopped responding.
After a few of them, the blue screen of death popped up with and error message:
SYSTEM_THREAD_EXEPTON_NOT_HANDLED, with sometimes some of them being with a different error message- like VIEDO_TDR_FAILURE or CRITICAL_PROCESS_DIED.
Still, all of them occurred after a video driver had been installed. I obviously tried installing them myself from the AMD website, but the same happened. Even with the driver auto detect utility, as some said, doing so would fix it, but no. I tried my PC setup with my old r9 280x and everything worked perfectly.
Today, I finally went through with the free Windows 10 upgrade. After the upgrade concluded, my laptop worked fine for about an hour, after which time it crashed to the new and improved Windows 10 BSOD, informing me that they would restart my computer for me. The problem is that, after the initial ACER screen, in which I can press F2 to enter setup, a Windows Automatic Repair screen comes up, and shortly thereafter, crashes right back to the BSOD. It will do this 5 or 6 times before giving up and staying shut down. I cannot press F8 or Shift+F8 to enter safe mode at any point.
Now, when I press F2 to enter the set up screen, I am given the following 5 screens, in order:
As far as I can tell, with an admitted lack of expertise, there does not appear to be any way for me to access the BIOS to at least get to safe mode, and perhaps go back to a restore point.
My computer was just fine and today I turn on my computer and a blue screen says "your pc ran into a problem. We'll restart for you. Error: system thread exception not handled"
How do I fix this and get my computer back? I don't even know how to get into safe mode.
The issue with by BSOD is I don't know what it is triggered by, it happens when gaming, sometimes when I watch streams and other times when I just use my PC to browse reddit and other sites.
DESKTOP-DGT5UST-Tue_02_09_2016_153420_22.zipDESKTOP-DGT5UST-Tue_02_09_2016_153420_22.zip
Finally got into safe mode through command prompt and was able to delete the driver from my Nvidia graphics card. Booted back up in normal mode and began the download for new driver. Then BSOD during installation.
View 4 RepliesStarted having BSOD/reboot problem yesterday. It seems to happen when the computer is idle and getting ready to turn off peripherals to enter sleep mode.
I uploaded the error log...
Not sure what happened. Bad Windows update perhaps?
I ran sfc /scannow and it didn't find any issues. I also ran the power troubleshooter and it didn't find anything.
Today I randomly received two BSODs, one with a System Service Exception error and the second with a Registry Error. The only thing I recently changed was installing a new game (Blade and Soul). Within that process I also updated DirectX.
View 1 RepliesAs from today I've got 2 SEE. Both time I was playing PC Game.All started after Win 10 installed updates today. My drivers are up to date ( will check again to be sure ).
View 1 RepliesBSOD usually happens in more graphic intensive games like GTA5 or Elite: Dangerous. I haven't gotten it in games like League of Legends or Hearthstone, which are less intense.
2 most recent Minidump files and the debug file are attached below.
Crash Dumps.rar
BROCKSRIG-Sun_08_23_2015__01509_33.zip
I suffer from randomly appearing BSODs. Approximately twice a day all screens (laptop + external hdmi) goes blank, sound (hdmi) stops. Previously (like yesterday and the days before) it got stuck there, with black screen, sometimes with flickering mouse pointer appearing after a while. Today I got BSOD with SYSTEM_SERVICE_EXCEPTION error.
I think it may be caused by the graphics drivers, since I wasn't able to install Intel Iris graphic drivers without disabling the nvidia optimus card in bios. Otherwise I got BSOD during Intel drivers installation with some error related to dxgkrnl (I don't remember exactly).
I was running my laptop on Win10 before without any issues (upgraded from Win8.1 using the tool downloaded from MS site), but after my SSD died, I did a clean install (from usb drive created by the same tool) and these problems started.
First off I'm on a fresh install of windows 10 x64 the latest Nov. build .... I was watching some streams on twitchtv just letting it play not doing anything else on the Pc after two hours of that the bsod occurred saying system_service_exception.
Bluescreenviewer stated a bug check code of 0x0000003b (video?). And highlighted the NTFS.sys+11b88 and ntoskrnl.exe+14cfe9 as the cause? I went and ran a disk check that passed same with sfc/scannow no problems found.
DESKTOP-I56J09N-Wed_11_18_2015_210951_39.zip
So I got that BSOD and ran sfc.exe /scannow (with administrator) but the program was unable to repair the corrupt files. I am running Windows 10. I've attached the dump file as well.
View 1 RepliesI have build a new gaming rig and installed Windows 10 pro but I have been getting bsod's and cannot figure out what is going on. I had it overclocked but since removed the overclock to trouble shoot the bsod. I have also run memtestx86 for 9 passes and no errors there. So I am reaching out for solving the bsod the particular bsod that is coming up is System_Service_Exception.
View 3 Replies