I bought a new computer a month ago, and am having BSOD each day. It's a Kernel Security Check Failure, and when i look in the event watcher, I can see a kernel-power critical error.
Every time I've logged into my account on my PC, it has rebooted (without showing any error message or crash screen) after a few minutes or so.
Opening event viewer, it shows event ID 41 at the time of reboot - the event before that is an event ID 6 stating "File System Filter 'FileCrypt' (10.0, ?2015?-?07?-?10T04:14:31.000000000Z) has successfully loaded and registered with Filter Manager." - I have never heard of filecrypt, the other events are all legitimate ones associated with the system booting up.
I have attempted booting in safe mode using msconfig, but that doesn't seem to work. So far, the only thing that works is by switching to an account that's barely used, where the computer runs perfectly well with no crashes.
I suspect a virus, but I haven't downloaded anything dodgy recently, and Avira (free) hasn't found anything either ...
Also, here's a link for a video taken of the reboot happening, as well as all open processes/services: [URL] ....
Specs: CPU: AMD A8-6600K @ 3.9 Ghz RAM: 8GB, 1 stick novatech 4GB, 1 stick HyperX fury 4GB (both 1600Mhz) GPU: MSI R7 260 1GB GDDR5 (OC) PSU: Jeantech 430W (not best make, but has been reliable for quite some time) HDD: 1TB Western Digital "Green" MOBO: Some Gigabyte FM2+ mATX cheapo board, can't remember exact name
Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
I have 2 monitors on my system. When the system comes up from power saving mode (unsure if in true sleep mode but user password is required) the task bar on the primary monitor is missing. The secondary monitor has it but not primary touch screen. I've tried various things like toggling auto hide, etc, to no avail but restarting brings it back.
So ever since I updated operating system to Windows 10, my HP Pavilion computer has been shutting down with no warning. And now my computer won't even turn on.
My desktop does not overheat, the CPU and the Memory does not go over 50%, have not installed any new programs since we've been using Windows 10. Right when I try to turn the computer on it goes to the HP logo screen and it turns off automatically.
Computer: HP PAvillion p7-1449 Desktop PC Model#: H4A14AA Serial#: MXX2430CQZ Processor: AMD A10-5700 APU with Radeon HD Graphics 3.40GHz RAM: 10 GB System type: 64 bit OS x64 based processor
When I sign out of my user profile on my 2 Acer laptops and then click shut down, the computer goes black indicating that it is shutting down. However, the power light blinks until it shuts down completely. I don't know if it's a hardware issue or what but when hibernation is disabled, it tells you its shutting down and the power light doesn't blink (instead it shuts down normally). This is not a UEFI BIOS, it is a Legacy BIOS therefore it doesn't have the option to enable or to disable fast startup. This occurs on my Acer Aspire 5250 and Acer Aspire 5749 laptops. My Acer desktop doesn't do this, but it has a UEFI BIOS.
Task Scheduler service found a misconfiguration in the NT TASKMicrosoftWindowsMedia CenterRegisterSearch definition. Additional Data: Error Value: %SystemRoot%ehomeehPrivJob.exe.
I have an Windows 10 Pro. I want to know what caused this. Task manager and event viewer was not responding and some of the applications stop responding. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.
My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.
Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. It was related to windows/software or hardware?
I had fresh clean install of Windows 10 Pro in MBR scheme . I want to know what caused this.Task manager and event viewer was not responding and some of the applications was not responding too. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. Thx. It was related to windows/software or hardware?I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86, Windows Diagnostics Memory and hdtune showing no errors. Maybe try GoldMemory or that will be waste of time?
My PC will randomly reboot when in the middle of any video game. It has not happened while I am not in a game (from what I can remember). It goes to a straight black screen, so no BSOD.
My CPU is running no hotter than 45 Celsius. It has only happened after being ran for 2 hours or more. There is NO error message upon shutdown/reboot, and I also ran a virus scan with MalwareBytes and found nothing. Event Viewer shows the "Kernel-Power 41 (63)" error.
After the reboot, it goes to my lock screen with no error message. It also loads everything on my desktop/taskbar abnormally slow.
The only thing new before the issue: -Gigabyte Gaming 7 Motherboard -Intel i7 4790k -NZXT Phantom 530 (Case) -Cooler Master Hyper 212 EVO (CPU Cooler)
My PC Specs are as follows:
CPU: i7 4790k Motherboard: Gigabyte Gaming 7 Ram: G.Skill Ripjaws X-Series 16GB (8GBx2) 1600mhz GFX: EVGA GeForce GTX 670 FTW 4GB D5 PSU: InWin 850w Bronze HDD: Western Digital Blue 1TB 7200 RPM SSD: Samsung 850 EVO 250 GB Monitor: 3 ASUS 24" (One is 144hz, Two are 60hz)
I have been getting these nvidia driver crashes, where the monitor turns off by itself and then recovers and I can continue using it normally, but lately the drivers just crash and a few moments after, the PC reboots on its own but fails to turn on the monitor, which forces me to do a manual reboot. After the manual reboot, I go to Event Viewer and find these errors: Critical, Event ID 41, Source Kernel-Power. Error, Event ID 3, Source Kernel-EventTracing.
My computer will randomly lose power without warning(or at least that's what it acts like). I'm not sure what is causing it, but I tested the power supply with a multimeter and the voltage is well above the needed amount. when it happens, my CPU is never above 38 degrees Celsius. This happens when plugged into a UPS and when plugged directly into the wall. I don't get an error message, and there is no report about it in the event viewer.
I have a Dell XPS435 (about 5 years old, I think) that is acting up. Sometimes on boot up,it will just freeze, forcing me to hard-boot. Lately, it just won't even boot up and if it does, it will just shut down sometime shortly thereafter (30 mins or so). I'm looking at speccy specs right now and the temp is pretty high, but I don't know what the median temp is (never had to before now ) I'm guessing the fan is going out?
the system specs are below:
Operating System Windows 10 Pro 64-bit CPU Intel Core i7 920 @ 2.67GHz144 °F Bloomfield 45nm Technology RAM 8.00GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
I've had Windows 10 since August, and for the most part, things have been going relatively okay. My only real glaring problem with the OS is that I can no longer here a sound during a system event. By that I mean the usual sounds like when you're clicking through the Explorer, emptying the recycle bin, a dialog pop-up and such.
My system is a Dell Inspiron N4100 that was previously running Win7 Home Premium, and now I'm running Win10 Home Edition. The sound in general works fine; like media players, games, and through the Internet browsers. It's only the system sounds that refuse to play.
This error started happening only on computers with 1511 installed. The original RTM of Windows 10 doesn't do this, nor do Windows 7, 8 and 8.1. I tried some Google searches but all I see are relevant to 7 or 8, not Windows 10. It must have been something changed between RTM and 1511 that did it, too.
When I refurbish computers for our employees, I wipe the hard drive completely (either diskpart "clean" via the recovery shell, or using DBAN to wipe the partition table if I can't get into WinRE.
I then boot it up using network boot. We have a Windows Deployment Services server set up so we can install Windows using PXE. I put the Windows 10 Enterprise Version 1511 .wim in there and it installs fine.
After install I make a local account, make sure the drivers get installed automatically (so far, it's been auto-magic for all our hardware, even NVIDIA and AMD graphics cards), install antivirus + MS Office and whatever special software that employee would need, and then I name the machine and put it on the domain.
To prevent extra crap from being created in C:/Users (and in the registry) I don't log in with a domain account. I let the employees do that themselves.
The first time any domain account* tries to log in, it errors after about 20 seconds with
Code:
Windows couldn't connect to the System Event Notification Service service.Please consult your system administrator. If they put their password in again, it goes through and all the initial settings are applied from our Group Policy Objects.
*I noticed that if I log in as an account which is a Domain Administrator (and via our GPOs, is also added to the Administrators group on the machine), I don't get that error. It only shows up for "normal" users which are not part of admins.
Nothing critical by any means as it will always work on the second try, but I'm really curious why it happens at all. What service is it even trying to connect to? The fact it happens on literally every computer (it even happens in VMWare images which I've done to test GPO settings) would imply it's not a problem with a particular machine, rather something in our domain. Or it's possible there's a GPO that was set years ago for Windows 7 that didn't cause any detrimental effects until now.
Since I have installed Windows 10 on my laptop there has been a significant amount of increase in RAM usage. Main contribution to it is coming from NT system and kernel, which is using around 60% of the memory. Is there any fix for it. I cannot use anything apart from Chrome, otherwise memory usage reaches the maximum limit.
Sony Vaio E-series Laptop 4 GB ram 500 GB Hard disk
- HP Pavilion g4 - Intel Core i3 2.2 GHz - Radeon 6470m (but somehow got 7400 driver and worked) plus Intel HD 3000 - Windows 10 of course - 2 gigs ram - And latest drivers, checked with Uniblue's driverscanner and link on other subforum stickies.
It's high memory usage of this process, it starts with ~7mb then grows up to ~200mb on heavy use. This happen with recently windows 10 update.
What I have done is, I do a restart every time I made these changes:
- SFC /scannow - Update driver (again) - Turn windows 10 tips off - Try disable Superfetch - Malwarebytes scan - Disabling High Definition Audio driver drops the process usage to normal 28kb, but this somehow rise again to ~100mb.
My computer seems to crash randomly when I have 2 or 3 programs running at once, need instructions to provide necessary information and data to see what may be causing the issue?
It's not a malware , it's not a heat problem . I checked them both and formatted my computer 4 times already, I am pretty tired . The last options remain is a windows 10 problem /hardware is not connected well? . My windows 10 is not a legal copy .
My computer suddenly completely restarts suddenly, even when IDLE .No warning involved , goes straight to black screen .
