System Takes 5+minutes To Start Up / 100% Disk Use
Feb 6, 2016
My Windows 10 does not start up faster as Windows claimed it would. It is very very slow indeed. I took a screen shot of the startup usage (Task Manager) and saved it as a Jpeg.what I can safely remove from this or else how I can make them go away for a while?
HP desktop I just put new hard drive in and installed Windows 10. The Windows 7 hard drive was failing, had no backup or image. Tried to access drive with USB but drive too far gone.
Decided to install Windows 10 as an upgrade. After a few minor glitches like no activation, was finally able to install and activate.
Used USB Build 10586, 1511 and was able to activate using the Key on the COA sticker. (Alphanumerical). PC now will take up to 20 minutes before boot.
The black screen, blue Windows flag and spinning dots just sits there. All of a sudden, it continues to boot. I don't have any programs, apps, starting.
In fact, it just booted now to the User name, passed, and now is at Desktop. Had been starting for about 20 minutes as I'm posting this. In the Task Manager, Startup, I don't have anything enabled.
When you do WindowsPowerShutdown,Monitor goes blank immediately, showing no more programs running. However the computer remains on for quite a long time (guess 2~3 mins), before it finally turns off - fan shuts down and everything seems to shut down at that point.
For whatever reason ever since I switched to windows 10. Opening my playback device literally takes 2-5 minutes to open. Even if it was just opened. If I go to re open it seconds later. It takes another 2-5 minutes.This is also running off of an SSD. When I was on windows 7 it opened instantly the second I clicked "Playback Devices" always. So why would windows 10 be any different? I use the playback device menu a lot since I switch between different audio devices constantly all the time.
So I have a 200 GB Hard Drive on my computer. A couple of days ago I got a notification mentioning there was not ten GB of space left. I was surprised, but I assumed I just had more on it than I thought. However, since then I have re-installed Windows for my own reasons and was surprised to find despite removing all documents and applications in the re-installation, I only had 90 GB free. This leaves 110 taken up by an unknown cause. I could not find many large files in file explorer when I searched for large files (file:gigantic).
Is this normal? my computer turns on, i get a black screen for about 35 seconds followed by the logo and a spinning circle and then after typing in my password i get another 30 seconds of waiting before it loads. it wasnt doing this when i had windows 7, is this just normal for ten?
For some reason, my disk, when i open my computer and at some other point, always spikes up to 100% for a few minutes.
This happens when :
at the start, Something called System and compressed memory always make my pc go to 100% disk usage. Later on, there are all those Service Host going up to 100% and something called RzStatsManager
When i open norton or when i download something new it also goes to 100%, each time I open google chrome too and Steam make the disk go to 100% at the start and every time i open it it goes to 20% and the system memory goes to 80%...
All these times, the disk spiked at 100% for a few minutes.
I disabled all my notification, each time i open my PC i disable Windows search and superfetch but it spikes up every time. What can I do?
Every time i leave my computer idle for 5 minutes, disk defragmenting starts acting up. It never did this on Windows 7, and its very annoying. This causes my fan to speed up and it stays that way until i give it some input.
I always put my computer to sleep when I'm done using it, and would rather defragment manually. I want to turn this 5 minute defragging off, but how?
I found out that the hard disk is 100% utilized. In Task Manager, the process that utilizes the disk the most is ESET Service. If I open Resource Monitor there are many instances of the System process that are reading the disk, not writing it. I have two partitions on my disk - one for the system and the other one for data; the extensive disk reading is done for Pictures (I assigned a folder with pictures, about 140 GB in size, to the system My Pictures folder) on the data partition.
I am not running any tests in the ESET Endpoint Antivirus software and it seems to me that the high disk activity starts when I do not do anything and just e.g. browse Internet or look at something. So, it feels like Windows is doing something, but what it is and how I can influence it. If it were disk optimizations I think I should see also disk writes, not only reads. Could it be that Windows is doing something automatic with Pictures, Documents, etc.?
I wonder what is going on - I dislike the fact that something is going on with the hard disk, making is 100% utilized and making other work very slow and non-responsive.
I have been monitoring for several weeks to try and find a pattern. After startup (fresh) or from sleep by Pc works fine for a several minutes or hours then just freezes!! I thought it was the sleep issue but now i notice it does it from a fresh start.
I have also tried using different browsers no different. It can happen when dragging to another monitor but it also happens when doing nothing it just freezes the mouse. I cannot recover i cannot activate Task Manager. I have reboot via pc power button.
I have latest drivers i think also Event viewer report not shutting down properly not sure if that is the crash or what. I keep loosing lots of work I am on.
The first win 10 upgrade worked well on my Packard Bell Easynote TS11SB laptop, but the next upgrade REALLY SLOWED DOWN the startup process. Now 2 minutes. I've tried the highly unintuitive disable quick boot up trick to no avail.
I just updated my windows 10 build 9926 to 10041 and I found start up is too slow about 1-2 min, in 9926 is was just around 20-30sec. And its also freezing a lot on my dell laptop.
I have just upgraded to Windows 10 from windows 7 home edition, I have problem while creating system repair image disk. I have inserted a blank dvd but while the create image app is running it shows error message called Unspecified error,
I'm having a problem where the system is constantly at 100%. Sometimes it goes down, but it keeps going back up to 100%. This is build 10162.How to stop this from occurring? Generally, the service MsMpEng.exe or ntoskrnl.exe which is System are at the top of the list.
Just converted my systems to Windows 10. Working well, so far. I would like to install 4TB disks on a couple of the systems and understand that I need to use UEFI. Looks like my ASUS P8Z68-U GEN 3 MB supports UEFI, but I don't understand how to enable it. The other system has ASUS B85M-E mother board. I've seen some one paragraph descriptions, but they don't really walk me through the process.
1 - Can I upgrade my existing system without a complete Windows 10 reinstall? I have lots of apps installed so I'd like to avoid complete system rebuilds.
2 - Due to legacy use of Mirrored drives, I'm using the Intel RAID stuff, although I no longer need it. Will that be a problem? SSD and other disks are JBOD. I'd like to get rid of that, but I think that does require a complete system reinstall since disabling the RAID wipes the disk.
Looking for step by step process to convert a system to UEFI to support 4TB disks?
I have created a disk image of the system disk, C: with the disk image software in Win 10 backup. The system disk was 70GB with 40GB of files. When I tried to write the image to the SSD the Win 10 install software said the disk (120GB= 110GB) was too small. I reinstalled the windows disk booted and shrank the system disk to just under 60 GB and retried the process with the same result. System is Win 10 32 bit on an old Acer netbook.I would like to be able to transfer the installed files to the SSD.I have looked at the tutorials for creating a system image and also how to create hardware independent image for installing win 10
I am getting a low disk space message from my system backup drive. It's 1 TB and it is full. There are not any files that I can delete. They are all system files.
Two questions:
1. Why is it so large? 2. Can I install a new larger drive and have it move the system files there?
I disabled UAC & i'm using the only account on this system, which is admin. Yet i'm not allowed to write to C roots and being ask to write in many other places.. How do i disable that & i'm having admin rights ALL THE TIME while using my admin account..?Ok so what i mostly need is the ability (permanently) to write to C: disk root. How do i do that?
I am using a small tablet with Windows on it. It already has little space (32GB which is actually 29 GB), with Windows eating up a ton of space. Now, with a virtual partition on the tablet reserved for system recovery, I have less than 5 GB left, not enough for Windows to update. I would like to merge the virtual partition so as to get ~5 GB extra space, in or to do so I would like to make a recovery disk on a SD-card.
The problem is, Windows does not seem to recognise the SD-card when I try to make a recovery disk! Is there a workaround, or did I get the SD-card in vain?
I hope shortly to receive a "pre-owned" Dell M6800 laptop with a 128GB Solid State Disk (SSD) and a 750GB HDD.
It comes with 8.1 installed (shudder) and I will upgrade to 10 immediately as I couldn't tolerate 8 or 8.1. Once I've done that, I'll need to transfer all my applications and data (which will be tedious I know unless there's some trick or clever tool/application to do it).
Aapart from the OS what should go on the SSD, and what on the HDD. Looking at my current system, the Windows directory plus Program Files, Program Files (x86) and Program Data run awfully close to 128GB, so this isn't quite as simple as Windows & Apps on SSD, with everything else on the HDD and use junctions if necessary to point to data on the HDD.
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
So I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
I have win 10 64-bit home on a 4th gen core -i5 laptop. I have a WDC 1T 2.5" USB3 drive. It is about half full. It used to do 60-70MB/s write speed. Since a few days ago, I noticed it has slowed down by a factor of 5-6 to 10-20MB/s. While copying large files, I watched what's going go. The System and compressed memory process was doing a lot of read and write on the disk. If the copy speed reported by the dialog is say 15MB/s, then system compressed memory process is reading 15MB/s and writing 30MB/s. It looks like this process is reading back the content written and writes back. It is consistent over reboot with several large files from 200MB to 7GB in size.
A couple of weeks ago I did a file backup. I created a 5GB virtual drive on my SSD and dumped all files to be backed up. Took only 5 minutes to copy the 5GB files to the virtual drive and copy the file to the WDC disk, at around 67MB/s, typical of this type of portable drives. While I was wondering what was going on, I tested the same files with a USB3 dock and a 2TB Seagate drive. Write speed is about 150MB/s. So I thought it was not a problem with all disks. The WDC drive has no compress to save space option, BTW. I wonder what's going on. I have AVG antivirus and I turned it off while copying and same slow 15MB/s speed.