My task bar is locked and located on the right-hand side of my second monitor. Occasionally I'll go for it and realize that it is now located on the right-hand side of my primary monitor. Most recently this happened after bringing my computer back from screensaver.
View 7 RepliesDesktop Icons move back to the left (default) side of the screen after customizing. this happens when the the computer is put into sleep mode and is woken up or when the monitor is turned off and turned back on. I upgraded to windows 10 Pro 64bit from windows 7 ultimate 64bit. This problem never happened with windows 7.
-Automatic Sleep mode is turned off - when I manually put computer to sleep mode and wake it up the icons are rearranged
-Automatic turn off monitor has been deactivated - when shut off my monitor but keep my computer on and then turn back on the monitor the icons have rearranged
-I have small icons setting
-Auto align icons has been deactivated
-allow themes to change icons has also been deactivated
My Computer:
LG 34UM65 - 21x9 - 2560x1080p resolution
AMD 9590
Asus Crosshair V Formula Z
Gigabyte HD7970ghz
Corsair Platinum Ram
WD HDD
Samsung 850Pro - Windows 10 is installed on the SSD
My Drivers are all up to date. and Motherboard Bios has just been updated to 2201
I have two monitors. One uses dual DVI cable and one uses DisplayPort. When the monitors wake up after a sleep, the apps on the DVI monitor move to the DisplayPort monitor. This probably has to do with the difference when Windows senses which monitor is active first.
Is there a way to stop the apps from moving? Is there a tool which restores the apps positions after a wake up?
Brand new Windows 10 Pro (64 bit) Dell Desktop.
Replaced old XP system (which ran like a swiss watch).
If I turn off the monitor (which I do every night as I need the computer on 24/7) when I turn it on all the desktop icons have moved back to the left.
This DOES NOT happen on a reboot or a shut the computer down and turn it on.
Medium icons, all power saving is turned off, auto arrange icons and align icons to grid are both unchecked.
I set up a wake-up alarm in the Computer management --> Task Scheduler that automatically plays a custom mp3 every morning at 7AM.The speaker is in my monitor and it goes sleep 10 min after idle. It's ok, I don't want to keep it turned on for whole nights. But, when the scheduled alarm comes, it does not automatically turn back on the monitor and therefore its speaker doesn't play the MP3 because the monitor remains in sleep.I tired various ways to make the alarm turn the monitor back on but failed.I just need my music file played as an alarm in the mornings.
View 1 RepliesI have this weird taskbar/toolbar on my 2nd monitor it just gets in the way and can't find any kind of setting to deal with it.
View 2 RepliesIs there a way to duplicate the taskbar to my second monitor? Right now, there are no toolbars, notification icons, search or date/clock.
View 9 RepliesI have two displays or monitors, side by side.The taskbar clock only displays on the right monitor. I would like it to display on the left monitor, or both monitors.How can I change this?
View 2 RepliesMy taskbar is out of place when I connect the second monitor. I extended the view.
It happens now and then. I think it seems to be working fine until I install the internet download manager. But again it might just be my suspicion.
Once I plug out the second monitor, the taskbar goes back to normal. This issue is the same for the wall paper. When i connect, the wall paper will look ok on the laptop but looks cut away in the second monitor. Same thing goes, once I plug out it will go back to normal.
I use the start menu of the secondary monitor to open an application, that application open on the primary monitor.
Is there a way to get that application to open on the monitor I started it from. (Using the Start Button of that monitor) ?
I don't actually get the point of having an extra start menu taskbar on that second monitor if it actually open the application on the primary one instead of the current one. It defeat the purpose of having a Start button on those secondary monitor. (I means if you gonna open an application on the primary one, I might as well just use the Start button of the primary one!!)
Also i'm having a second issue related to the first one i guess:
Example: I open ChromeFile Explorer or whatever on my secondary monitor and close it. When I try to open a new one on any monitor it would open it at the LAST KNOW LOCATION of where I closed it.
This is very annoying when you use "Virtual Desktop" "Multiple Monitor" If I open an application I expect it to open where I launch it from(Monitor,Virtual Desktop etc).
Ok so, this is my work computer and I did the upgrade to windows 10 and my first reaction was to go thru and get rid of all these apps and things I don't need on a work computer. Well, Cortana was one of the first things to go. Big mistake. I realized later that Cortana was the only way to search my computer for files. I had removed her search box, and the little O icon on my taskbar. The only place she remains is in the start menu.
I have been googling for 2 days now trying to figure out how to put that dang search box BACK ONTO MY TASKBAR! I cannot right click the taskbar and select Cortana and choose to hide or place on taskbar or anything of that nature like all the articles I keep reading, because I removed her completely.
See?? Not there, no Cortana mentioned at all.
I cannot drag Cortana out of the start menu and pin it back on the taskbar, it simply will not let me.
Nowhere in the settings can I find the option to put Cortana back as a search bar on my taskbar. Or to just put her back on the taskbar as the O icon. I used the search feature from my start menu in Windows 7 daily. Yes, I can open the start menu and click on cortana, then click on the search box and type my inquiry, but 9 times out of 10 I am on the phone with someone spouting off information that needs to be accessed quickly and eliminating the few extra clicks it takes to access Cortana like I am currently, would make me so very happy.
I accidentally deleted the default folder icon that comes standard with Windows 10 home. Well, I didn't delete it, I hit the "Unpin from taskbar".
Where do these icons go when you unpin them? And how can I get it back?
I know I can replace it with File Explorer, but I like the files that are displayed with the standard folder icon.
Slip of the keyboard. I unpinned the folder icon that comes standard with Win 10 on the taskbar. I replaced it with File Explorer but it's not the same format. The folder icon that comes with Win 10 on the taskbar brings up the Libraries on the left, then the right side, I think, had folder and file listings. Don't remember - I did this about a month ago.
View 4 RepliesURL....From the registry?
I know that in this case I need also to know what is the primary display or how to get only the primary display value because I want to get the value that set only for the primary display..The key "LogPixels" in HKEY_CURRENT_USERControl PanelDesktop Is no longer relevant for me in Windows 10.
In build 10240 I can download a Danish language pack in Settings. However I can't set it as primary... How to do this?
View 5 Repliesis there any way to use SSD as cache to speed up primary HDD with Win10? I happen to have a 24GB Intel 313 drive I'm using for linux but I was wondering if I could use it to quicken my Windows...
View 2 RepliesToday, I tried to remove my old windows 7 (installed in drive D), dual booted with window 10.
However, I couldn't remove it because it was a System, Active, and Primary Partition.
And my Default Windows 10 drive C was Boot, Page file, Crash Dump, and Logical Drive (as shown in the picture)
Noticed this #2 partition, (128MB), on my lappy, is it serving any purpose? Best way to include it in the C: partition
View 9 RepliesI currently I have W8.1 which is running on a HDD. For Windows 10, I am upgrading to a SSD for my OS, some programs, etc. Thing is, I want to keep my HDD for a storage drive. It has many pictures, videos, songs, etc that I want to keep. Problem is, it is currently loaded with Windows 8.1 and some programs that I would also put on the SSD. How do I just get rid of Windows from it to make it my storage drive? Do I need to? Should I just get a second HDD entirely and find a way to move my pictures, video, songs, etc to it?
View 1 RepliesI used a SSD to put the OS and other required things. I received my hard drive a few days later and just connected it. How to set up my new hard drive as the primary for installed applications, such as games. I would still like to use the SSD for my more necessary applications, but want the hard drive for large files. I am on windows 10 btw
View 1 RepliesI've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 RepliesAfter I free upgraded from 8.1 to 10 a new partition showed up. I just deleted it and it became unallocated space.
How can I merge this space with my primary partition. Both are on a 256 SSD.
When I right click C: in disk management, the extend volume choice is grayed.