Running Win 10 on a HP Envy and upon startup everything normal, then icons appear on desktop, then a 5 inch black square in upper right of screen and this hangs for about thirty seconds then disappears and everything is fine. This does not occur on restart. At the top of black box is the following C:programdata242466sysmon.exe. How do I get rid of this delay...
View 7 RepliesI am using a windows 10 pc.
Specs = 4gb Ram Intel i5 4210U.
Problem = When I boot up my pc after logging in and entering my password , i get a black screen with only my cursor. After 30-60s the screen flickers and everything becomes normal and works fine.
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Repliesso I recently did a clean install of Windows 10 on my laptop which I bought in 2011 with Windows 7 originally on it. The install worked perfectly fine and the OS works great except for one thing. When I select the restart option, the computer restarts and shows the Windows boot logo but then after that I just get a black screen. At that point, if I press the power button to put the computer in sleep mode and then press it again to take it out of sleep mode, the login screen appears. When I choose to shutdown and do a cold boot, everything's boots up fine. I do not have the computer connected to another video output source when restarting so it should know to project onto my laptop screen. All of my drivers (including graphics) are up to date as well as all Windows updates.
View 14 RepliesI am trying to figure out what is going on with my mom's laptop. Two days ago she told me she was using her laptop and everything was fine, but then she left to do some things in the kitchen and came back a bit later to the screen off. Upon waking it up by moving the mouse, all she got was a black screen with a white cursor. I have looked at it and upon manually restarting, it shows the Windows 10 logo, and then it goes to the black screen with the cursor. There is no login screen either but I do also hear the welcome music. One thing I noticed though is the cursor does have the blue loading circle next to it like it is actually still doing something, and it flashes and spins now and then, as well as the computer sounding like its working, but I have left this on for almost 40 minutes now and it is still just a black screen. It sometimes goes to the off screen and have to move the mouse to wake it up again. Some people online suggest task manager and opening up other windows but nothing works, I can just move a cursor.
View 4 RepliesI just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 RepliesI have acer aspire 5740 laplop, core i3 ..... A problem occured extending c windows drive as described below. It have 3 local drives
c - 20gbboot primary drive
d - 90 gb system , primary drive
e - 50 gb logical
Some unallocated space, I was extending c ,by deleting drive d ,at the deleting drive it, gives warning, that if you delete drive d , may your system not get start, i deleted, sudden restarting windows, displaying operating system not found, i tried to install new windows, no booting, after 2 trial, it showing black screen , i have tried some soln as per knowledge ram reset, ms dos boot usb drive. but nothing happened, laptop get normal heat, felt like hardrive boot.
On Friday, I updated my HP Envy 20 to Windows 10. Once the update was finished my computer started up fine, however, my antivirus software (AVG) said there was an update and I needed to restart. I did so and after the restart and HP logo screen I had a black, but luminescent screen. After a maybe ten minutes of the screen staying like this, I held the power button down to turn the computer off and then restarted it with no problems. I turned it off Friday night normally and it ran normally all day Saturday. Sunday when I turned the computer on the power light came on and I could hear the fans turn on, but the screen remained black. Just black, not even a luminescent black like when I did the antivirus restart. I tried a hard restart like before but nothing changed. I left the computer on like that for around an hour and nothing changed. Figuring it was maybe a heat issue, I opened up the case and dusted the fan and the heat sink but the problem remains. I posted this problem on the HP support board a few days ago and have heard nothing.
View 4 RepliesMy Windows 10 PC seems to be working OK but I notice that between the Windows 10 splash screen and the user sign on page there's a period of time when the screen simply goes black. The system does get to the sign on page but black screens freak me out a bit...
Also when I log off I'm seeing the same thing. With Windows 10 when I shut down there's a brief period when the screen is simply black and I'm now having to rely on the sound of my machine turning off vs. the visual queues that I had under Windows 7.
I recently tried to reset Windows 10, but it wouldn't let me. So I started up my pc after and now it's just a black screen. Before all this I was trying to fix my nvidia drivers, and someone recommended me to reset Windows and now Windows won't even start.
View 1 RepliesI just installed Windows 10, but every time I start up the computer, it will show a black screen before getting to the login screen and then the computer will restart by itself after about 5 seconds.
It does this over and over again.
Some things I've tried:
- I have multiple monitors, so I tried disabling the other in BIOS. Didn't work.
- I tried booting from the integrated GPU rather than my NVidia GPU. Didn't work.
- I unplugged my second monitor. Didn't work.
- I updated my NVidia driver through safe mode. Didn't work.
When I am accessing taskbar and startup and open my computer top and sides its showing as black .
Attached the images for reference ...
Today I upgraded my Win 7 PC to Win 10. Everything was fine 'till the installation finished and came up with my desktop. it loaded normally for a few moments then a black screen appeared with no taskbar nor the icons only cursor. I can access the Task manger and I tried terminating explorer.exe and restarting it but nothing changes.
View 1 RepliesEver since a repeated power failure, Windows 10 loads with a temporary profile
View 1 RepliesMy Inspirio 14 laptop currently has 5.74 GB of useless files sitting around in it, but none of the tools to delete them are working. Both Disk Cleanup and the option in the menu at:Settings>System>Storage>This PC>Temporary Files.Disk Cleanup won't even start, even allowing for some time. (I waited a full hour for it, still nothing.)I need to know where I can access these files to delete them myself. I already deleted things in the %temp% and prefetch folders, which brought it from 6.25GB to 5.74. I have tried running Disk Cleanup from every menu and shortcut it has, but none have worked.
View 1 RepliesSettings -> System -> Storage -> c:/ -> Temporary Files will not delete.
I have 56gigs of temp files that I can't touch/find/remove. The delete temporary files will not work to clear this. I've tried various Ccleaner and disk clean up.
I want to move my cache folder to ram disk in microsoft edge but don't have a clue.
View 1 RepliesSo after removing Windows 10 Developer preview from mscongif (after I upgraded from windows 7 to 10) I was still booting in the OS selection menu because I once attempted to install Kali Linux and now I have an extra option in this menu to "Continue to install Linux...". This option does not show up in the msconfig boot section. How can I remove it in order to save 5 seconds of booting time?
View 1 RepliesHave my new Win 10 Pro system up and running...so far so good....except for networking ? However...I forgot to keep track of my passwords/acct records...etc for a number of programs on Win 7 that I am putting back onto Win 10...passwords...registrations keys...etc
Can I restore a full Acronis tib of Win 7 Pro and do a dual boot setup with the new 10....and how ?
I know it's not kosher to have both Win 10 new and the older Win 7 on the same PC because of the clean upgrade to Win 10...but I need it a short period to get into Win 7 to recover/find my passwords and registration info for a number of Win 7 installed programs to activate on Win 10
How do I go about setting up a dual boot 'temporarily' to recover needed information for my new Win 10 Pro install?
In settings I have a large temporary files allocation which says I can delete, I click and it says "We're cleaning up your temporary files. Come back In a bit to checkout the results." I have left it for hours and there is no change. They are taking up a lot of room.
View 2 RepliesI've just made a very simple batch file for cleaning my temp folder. I've put the .bat file in my startup folder so it would clean TEMP when i log in. I've wrote down the following lines:
rd D:TEMP /s /q
md D:TEMP
As i said, very simple. But the problem is that it is not working. I also think i know why; there are files and folders in the temporary folder that are in use so the batch file can't delete them.
Internet Options gives recommended settings for temporary files as between 50 and 250mb. After Windows 10 upgrade mine was set at over14,000mb.
View 1 RepliesI have three entries (among others) that are slated to startup when I logon. Each of them are featured twice in the start up tab of program manager.
On checking with autoruns I found that they occurred twice in the registry under
HKLMSOFTWAREMicrosoftWindowsCurrentVersionRun
and
HKLMSOFTWAREWow6432NodeMicrosoftWindowsCurrentVersionRun 14-12-2015 02:23
Is this normal?
My laptop is running windows 10 64 bit.
When one of my family members goes to sign in, it says "preparing windows." Then, once they are logged in, it says "You've been signed in with a temporary profile. You can't access your files, and files created in this profile will be deleted when you sign out. To fix this, sign out and try signing in later." The problem is still persisting a day later. Aif I turned off sync settings, would that prevent this from happening?
View 2 RepliesI'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 RepliesI downloaded and installed windows 10 home premium version on my desktop. The blue screen have been annoying me time by time when I'm using OS properly. There are several errors shows up every often, such as bad pool xxxx, page management, no area paged found. I tried reinstalled OS but the problems still exist. How to solve those errors. Someone said its caused by the drive software which I don't know how to pick it up from so many drive tools in my system. By the way, is there anyway to solve problems directly except downloading new OS version again?Currently running home premium 10240
View 1 Replies