I recently bought a new Toshiba touch screen Laptop, primarily for my recording studio and on-site recordings. It works well with my DAW Software (Sonar Platinum) and my recording hardware.
However, it does not have the Stereo Mix and from what I find there is no way to add it, as it apparently has been disabled in the hardware.
I have a Toshiba Laptop with an AMD processor, 4gb Ram, 500 Gig hard drive with 366gb free. It is running very slow. I have over 70 processes running. I'm pretty sure I don't need that many but I don't know what is needed and what is not. I've tried to copy the list but can't figure out how to do it. I'm using open office.
View 4 RepliesI just upgraded to windows 10 and now my dvd player, and videos from my hard drive, play with sound and no picture.
View 1 RepliesThe camera on my Toshiba S50-B laptop worked fine when on the original Windows 8.1 but doesn't work now that I have upgraded to Windows 10. It says "Something went wrong - make sure your camera is connected and not being used by another application". I have tried everything I know of and find no reason. Is there another driver required or ...? I cannot even find the camera.
View 2 RepliesI have toshiba l50-b-235 laptop with built-in Onkyo stereo speakers, enhanced by DTS Sound, Skullcandy certified and now all of sudden since upgrading to windows 10 from windows 8 the volume is really low (it has dropped around 50%). what can i do to fix it.
I went to device manager and sounds but underneath i can only see conexant smartaudio hd now (this came only after upgrading to windows 10) and i have uninstalled and reinstalled it already but of no success.
Computer Model/ Specs:
Toshiba Satellite L50D - B
Serial No. ZE257837C
Processor: AMD A6-6310 APU with AMD Radeon R4 Graphics 1.80 GHz
RAM: 8.00 GB (6.96 GB usable)
System Type: 64-bit Operating System(Windows 10), x64 based Processor
My laptop goes to sleep and never wakes up without having to force a restart. I have changed the settings so it will never sleep or turn off the display, but, it goes to sleep anyway
So, I don't know how to fix it, and I need to know how. I turn my back for 5 minutes, and all my unsaved work is lost cause I have to force a shutdown. The computer goes to sleep, I press the on button, the computer starts doing its usual hum, the number lock light turns on, and nothing else happens.
my Toshiba Satellite has Windows 10 and it shows that it's connected to the internet though when i try and run chrome it say's it's not connected when i run steam it say's it cannot connect to the steam network.
View 1 RepliesI have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)
I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.
I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.
Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip
Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.
I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.
The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.
All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.
Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.
I have an HP laptop, and my sound card is (displayed using PCIutils for Windows):
Code:
Intel Corporation 7 Series / C210 Series
and I am finding difficulties in getting stereo sound from analogical headphones (plugged in with 3.5mm jack). Drivers downloaded from HP or Realtex do not work, drivers supplied by Windows (although they are Realtek drivers as well) sometimes work, I mean: speakers and headphones are shown together at the mixer, and sound from headphones is not stereo. I then go to device manager, audio input and output, and uninstall "Speakers/ Headphones". I then reboot with my headphones plugged in, and, after that, the sound is stereo, and (IIRC) the mixer distinguishes between headphones and speakers.
But then things get broken back soon: one time, the windows updated the sound driver, and no stereo sound again. I uninstalled the device, rebooted, and stereo back. Then I unplugged the headphones, and windows said that no speakers were found: I restarted the audio device, speakers were found again, but stereo broken again.
I got a laptop (Sony Vaio VPCEG17FB). I used to use Windows 7, which was already installed on it when I bought it. It was extremely easy to enable Stereo Mix on Windows 7.
But now I've just installed Windows 10. The same procedure which worked to enable Stereo Mix on Windows 7 doesn't work on Windows 10.
How can I enable Stereo Mix on Windows 10?
I use an ACER ASPIRE 4736Z laptop running on windows 10 32 bit OS. I have tried many versions of realtek and updated all my audio drivers but still i don't get the option studio quality for the microphone settings in realtek audio manager. Instead i get only CD and DVD quality options. This doesn't work as I always get a hiss when I record using my microphone. I have adjusted the microphone settings in the control panel as well. Need getting the studio quality option for the microphone in realtek audio manager. Find the attached image
View 8 RepliesMy Razer Tiamat 7.1 headset has a button the the controller that switches to stereo mode. I have it set up in the playback settings on 7.1 surround sound. The stereo mode works with all audio EXCEPT for the Steam chat system (works in steam games). On my playback panel it even shows that it's picking up the chat audio (the green bars). Just no sound coming from the mic. I checked the volume on the Tiamat controller as well.
View 1 RepliesI read through the forum and used the instructions given using an external mouse to sort he touchpad issue out. But my clickers won't work. It's a Toshiba satellite C50D-B-120 laptop and prior to his I had windows 8.1.
View 1 RepliesI have a Toshiba Satellite m645 with Windows 10. I'm seriously trying everything just to access the UEFI/BIOS settings on this computer. I know that you have to go to Update & Security and reboot through the advanced settings. Then you click troubleshoot and in that menu should hold a uefi settings option but my computer just doesn't and I'm not able to press esc/f2 on startup to access bios either because that simply doesn't work. Why don't I have a uefi settings option?
View 4 RepliesI was attempting to upgrade my Toshiba 8.1 to windows 10 and was offered to update bios and Atheros Wireless Lan Driver. I mistakenly did both updates and now have lost the Lan Driver. I obtained usb system recovery from Toshiba but when I attempt to recover, the Atheros Wireless Lan Driver wont and I am stuck. Is there anyway that I can reinstall the driver and finish recovering my pc? I have download the driver onto my usb.
View 2 RepliesHad a customer present their laptop for repair following Windows 10 upgrade, so wanted to post the solution here.
The device, a Toshiba Satelite Pro Touchpad had an issue where it appeared to hang on startup following upgrade to Windows 10. Investigation revealed that the issue was actually the Touchpad was becoming disabled due to a problem with the ELAN driver that Windows 10 had installed. I wound the driver back and everything was fine, then Windows 10 decided it had a better version of the driver and installed the bad one again. Solution was to wind back the driver again from 15.8.x.x to 13.8.x.x and disable automatic update of drivers to stop it being replaced again.
Clearly it is not ideal to disable the driver update capability, however if there are not sufficient checks and balances to ensure that the right driver is being installed it is going to create more problems that it is worth.
Microsoft Suggestion: It may be an idea to allow disabling driver update for individual driver basis.
I have a laptop with one jack for headphones and microphone. The computer will not register headphones being plugged in. The speakers work fine and continue going when headphones are plugged in.
I have the newest audio driver and I can find no way to get the headphones to work. I don't know if it's the hardware, Windows 1-, the drivers, or something else.
I have a Toshiba Satellite P55-A5200 laptop with a CD/DVD player. I insert the CD/DVD, I can hear it starting up and making noise, but then nothing happens. What do I need to do to play these disks?
View 1 RepliesI just recently(July 30th) installed Win 10 on my Toshiba C55D-A5382 laptop, that originally came with Win 8.1(purchased summer of 2014). After the full install of Win 10 - that took 35 minutes to do(using Brighthouse Lighting 150Mbps connection), Win 10 flashed up saying - install was a success. After it restarted and I signed in(newer start pages look great to me), I placed the cursor on the "Start Button" to have a look see at all the new stuff to be seen(but to no avail). "Start Button" does not work at all nor does the bottom task bar line either, and my laptop has been on for 3 straight days now(getting worried about over heating issues). When I had Win 8.1 OS on this laptop, it use to go to sleep on it's own - but not now. I have waited patiently for "Windows Support" .... Using both "Live Chat" as I waited for over 74 minutes, and over the "Phone Support" as I waited for over an hour - both to no avail. Is there anyway to kick start the "Start Menu" again? Can I go back and re-install Win 8.1 on to it and then re-install Win 10 on it again?
View 1 RepliesHave eventually got 10 on my Toshiba Satellite R830. The problem I have is my Webcam does not work. Thought it was a driver problem but one was installed checked with Toshiba support site but no drivers for 10 showing only the one on my laptop. Spoke to Toshiba who tell me that this is all down to microsoft as they understand as microsoft were doing all of this automatically they had undertake to update all the drivers in the new installation???
Trying to contact microsoft seems to be impossible as they want an activation code but when I said I do not have one for Win 10. Was then told they would transfer me tech support and the inevitable disconnection occured. This after some 20 minutes waiting on the phone.
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
View 3 Replieshard disk of a laptop with windows 10 used as external USB drive to another laptop and it workded but there are some problems that display is poor and shows windows is not activated but in my previous samsung laptop it was activated when i downloaded it freely from Microsoft. Other things are going smoothly till now.
View 1 RepliesI have a laptop running Windows 7 that is connected to a printer. I am connected to the internet using a WiFi connection. I have a homegroup called workgroup. My wife has a laptop running Windows 7, connects to the internet using the same WiFi modem and prints using the printer on my laptop.
I downloaded Windows 10 on to my Windows 7 laptop and all of a sudden my wife can't print anymore. Microsoft, you've done it again. How I hate this!
I fooled around with HomeGroup settings on the Windows 10 laptop and the system attributes on my wife's laptop and now I can see her computer on my Windows 10 system. But I cannot see the printer on my system from her laptop.
I tried to click on my compueter from her laptop and I get a request for username and password. I don't know what username and password to use. I gather from reading the forum that I should put the name of my laptop in the username but I don't know where to look for the password.
The other day I was trying to install Ubuntu on my laptop. I searched the Internet for a guide, and it told me to use a software to create a bootable USB and let BIOS boot from it. I did that, and attempted to change it to boot USB as the first priority. After saving changes, exiting and restarting the laptop, it will not boot at all.
The exact process is as follows, when the power button is pressed:
Power button itself, 2 out of 3 LEDs beside the power button (WiFi, Caps Lock, Num Lock; only the last 2 light up), power light indicator (not sure what the exact name is, but it has a light bulb symbol above it), and the disk activity indicator all light up at once after one second. Screen also lights up (super dim) but only for around 200 miliseconds?All lights and indicators then disappear, except for power button and light bulb indicator which are still lit. Battery indicator flashes only when it is very low on power (< 7%).
Cooling fan doesn't seem to be running, and laptop gets warm after a minute until powered off.Keyboard is apparently not turned on, so spamming all kinds of keys like Del, Esc, and F hotkeys doesn't bring me to BIOS.Inserted a system repair disc (that is created in Windows 10 from a spare laptop, which is currently the one I'm using). Disc reader only spins the disc for a few seconds and stops, and laptop doesn't boot from disc. Force shutting it down and power it up again with the disc still inside still won't boot from the disc.
I've tried several other options, like draining all the power from the laptop and taking out the CMOS battery then putting it back again, but all to no avail . Operating systems installed in both laptops are Windows 10.
I changed the boot order to boot USB first, and laptop won't boot AT ALL. BIOS isn't accessible; it doesn't do anything.
From time to time when powering down my Laptop (Dell Inspiron 17) , the two blue lights in front remain on & I need to take out the battery
I would like to know what is possibly causing this and how I can get it corrected
while working on my laptop, it suddenly goes off, and I cant get it to switch back on, so I take the battery out and after few seconds I try to switch it back on, no go, then
after a minute or so, the computer suddenly springs back to life, saying its doing a windows update,i had no notification of a windows update, so I cant understand whats going on here, and best of all , this is the second time this has happened