I've installed Windows 10 on two different HP Pavilion laptops (dv5, g6), and the problem is that the scrolling function turns off automatically (will be unchecked) after every reboot. Tried with different versions of Synaptic driver, the newest and an older one, it's all the same.
View 2 RepliesI am using a dell inspiron n5010. the original synaptics driver keeps crashing every few days. I tried replacing it with microsoft drivers but 2 finger scrolling doesn't work with this. I need 2 finger scrolling since i dont have a separate mouse. Is there a solution?
View 5 Repliessince upgrading to Win 10 the Synaptics PS/2 touchpad will not scroll. I have rolled back the driver - didnt work, reinstalled the latest driver (15/7/15) -didnt work, all the relevant check boxes in device setting are enabled. (HP Pavilion dv7 Notebook PC)
View 4 RepliesEver since I upgraded my Dell Inspiron 15-3521 laptop to Windows 10 from Windows 8.1 last year I've had intermittent issues with the touchpad. Specifically, about 25% of the times that I turn on the computer I'm completely unable to scroll up or down using two finger multi-touch gestures (putting two fingers on the touchpad and moving them up or down to make a webpage scroll up or down, for example). The mouse cursor will also randomly stop responding for a few seconds at a time when the scrolling issue is occuring. Usually I just restart the computer to get around it but I'd like to fix the problem once and for all.
I've tried fixing the issue a number of times over the past few months by upgrading the drivers from Dell's website as well as attempting other fixes suggested on other forum posts describing the same issues but haven't had any luck. I'm ready to try anything you suggest, including things I may have done already (ex: downloading the latest drivers), preferably saving more drastic measures for last. In addition, I should mention that after upgrading to Windows 10 I also began having intermittent issues with sound quality (bass is very low) when using headphones.
Scrolling using the touchpad is not working on either of my acer notebooks after updgrading to 10.
View 3 RepliesI just updated my win7 to win10, despite several negligible issues, so far I'm rather content about it. I browsed several options, lurked around settings, internet, friends- no straight forward method found. So, how to set the touchpad back, to behave as it used to in win7? My laptop does not have touchscreen, therefore i have no need to use this built-in 'feature', which is no good for me at all.
View 5 RepliesI upgraded my Gateway NV570P laptop. As soon as the upgrade finished, the scrolling on my touch pad no longer worked. I checked the settings, and it is still set properly for the scrolling to work. I tried upgrading the drivers, but Gateway only has touchpad driver updates for Windows 8 not Windows 10 - I tried installing those updates anyway, but it didn't fix the problem.
View 2 RepliesI recently upgraded my computer from Windows 8.1 to Windows 10 and have noticed some issues:
Whenever I stop moving the mouse, the little blue loading circle keeps blinking. Now I don't exactly if it's causing any problems but I'm sure it wasn't doing that before I upgraded and I think it may be related to this second issue:
My touchpad no longer scrolls with two fingers. Now it only scrolls via touching the right side of the pad and dragging my finger up or down. No two finger gestures work anymore.
There seems to be a new driver called Elantech and I've found a settings menu for it but the gesture controls say they're turned on even though they don't work.
I have an MSI GT 60
i7 Windows 10
My laptop touchpad scrolling stopped working this morning after I updated my gpu driver. I went to the packard bell website and looked at the touchpad drivers for my laptop. There is a synaptics one and a elan one.
I have them both installed on my laptop but it still isn't working and there is still no virtual scrolling option in synaptics. These are the options that I have in the synaptics settings:
This is what it should look like:
What do I have to do to get the scroll trackpad feature to work again? P.S, when in device manager, even though there is an ELAN tab in mouse properties, Only the synaptics driver shows up under the mice section in device manager. Does this mean that the synaptics driver is replacing the ELAN and I need them both for the scroll to work.
I just got a second hand laptop - Acer V3-771G with an Elan touchpad and I put a new SSHD hard drive in it and installed Windows 10 fresh.
I see lots of issues with ELAN touchpads but it seems as though Microsoft has produce one that installs and fixes most scrolling issues.
However, I have a strange one. When I enable vertical scrolling in the driver, it works as long as the mouse is active - and for up to 5 seconds after. But when I stop using the touchpad and go to scroll again after 5 seconds, it doesn't work anymore! It's like it disables it after inactivity - but only 5 seconds?
I've uninstalled and reinstalled drivers, tried various versions - but of course Acer doesn't support Windows 10 on this older model laptop (circa 2012) so there are no specific drivers for it on their site. Everything works except for this scrolling after 5 seconds - which I can recreate every single time.
I've just copied my 500gb disk into 128gb SSD disk using EUSEUS Partition Master. After that MBR,boot and BCD was screwed up. I couldn't boot from SSD. So i've just used Windows 10 installation DVD then fixed mbr,boot and rebuilded bcd. After that F11 function key which is used to run Lenovo Recovery enviroment dissapeared from pre-boot menu. What i need to say that on HDD disk everything works perfectly. I don't use this HDD anymore, just SSD. I want to be able to run recovery enviroment from pre boot (using F11 key).
View 2 RepliesPrior to the windows 10 upgrade I had my mouse settings such that when a USB mouse was plugged in the touchpad was disabled. In window 10, the functionality is still available however now I have to manually change the settings each time I turn on my laptop.
View 1 RepliesI decided to make the jump to Windows 10 from Windows 8.1, and I have to say, the design looks simpler to use, but this new OS software has done something with my touchpad. Originally, on my Windows 8.1, I was able to scroll through whatever web pages or folders in my computer with one finger using my touchpad. With this new update, initially, I thought it broke my touchpad completely, but the problem has been narrowed down to having to now use two fingers to scroll in the most awkward way as this touchpad doesn't seemed to be designed for two finger scrolling. Is there a way for me to change this back? Would I have to revert back to Windows 8.1 to get my one finger scrolling back?
The laptop I am using is a Gateway NE56R34u, and the touchpad is an ELAN.
How can I get my mouse scrolling. I can't use it on my laptop since downloading 10
View 5 RepliesI upgraded to Win. 10 8/3. Everything seemed to work fine for 2 days. Then yesterday, the 5th, I could no longer scroll sites up or down by touching and moving my fingers up or down. The other touch functions still work, like going to links or sites, the 'click here' (touch here) options, close,etc. I can even scroll by touching the scroll bar and moving it up or down or right or left. My fingers don't scroll anymore unless they move the bar. And I just noticed areas on the sites don't get bigger or smaller with just fingers touching them and moving them farther apart either. But I don't know if that's supposed to happen. It did with Win 8.
View 9 RepliesI am wondering about performance. All seems to be working. Last December I built a new i7-4790k with 512GB SSD and 16 GB memory. I am using Windows 10 Pro...64 bit and all seems fast. My video card is an EVGA GeForce GTX 750 Ti FTW. This should be overkill as I do not play games.
So my problem is that on the web, I seem to get a page at a time, instead of a smooth scroll. I use Firefox, but now I see it is NOT a web issue. I see this in multi page Office 2013 documents and even Quicken. Is there some setting that I am missing that will load all it can and provide smooth scrolling instead of a page at a time brief delay?
Win 10 and my drivers are up to date.
Since Windows 10, when I try to rename a file, I right click allowing the file box to open. But as soon as I try to rename the folder, it closes out. If I just type in a few letters before it closes out, eventually I can get it renamed, but it takes multiple tries and is very time consuming.
Also, if I scroll down a page using the bar on the right hand side, the page continues to go back up to the top.
I just install windows 10, first issue was the page "any page" (internet ,emails, any list of folders) it wont stay where you want it ..it keeps scrolling right back up to top of the page...
View 1 RepliesI have installed the Win 10 enterprise LTSB the trial version. So far, so good, with the exception of two details:
- The scrolling of inactive windows isn't working properly. I mean, it works only when the "Settings" window is the active, then I can scroll the inactive windows underneath it, but nothing else.
- I tried to update the system, hoping that it would fix the issue, but it doesn't download anything.
Maybe the update function is disabled in the trial version?
Is it possible to enable 4 way scrolling with Apple Magic Mouse on Windows10? I loaded the drivers from Bootcamp which enables 2 way scrolling. The only drivers I have found that work well are from Parallels on my Mac. Trying to enable the same capabilities on my PC with the Magic Mouse.
View 1 RepliesEver since I installed 10, I have major issues with scrolling through selection menus and drop down menus pop up when clicked on but immediately disappear. Also on start up, the page that is supposed to roll up to access your login screen won't roll up on it's own...I have to hit f11 to get it to go up.. It is not only in web-based windows on the scroll problem either...it happens in the start menu as well and sometimes there is no response when something is clicked on.
View 2 RepliesFor some instances, I do have a long right click context menu which causes it to require clicking the 'up and 'down' buttons respectively to see the hidden options. However, a mouse scroll is more convenient. I have tried various makes of mouse but none of them seem to be able to enable me to wheel scroll in a right click context menu.
View 1 RepliesSo two things; when I restart my computer my saved and in-use cursor always resets back to the default cursor pack that comes with the system. I had this issue in Windows 8.1 too, but now it's getting on my nerves because I've got to go to the cursor customization panel every time I turn my computer back on for 2 reasons.
The second reason is not one I had in any previous versions. On my laptop touch pad, I always use the invisible scroll bar option on the edge, which you can turn on through the Synaptics settings, which is now found in the same panel I use to change my cursor back.
Is there any way to make these two settings default so I don't have to redo them every single time I turn my computer on?
For the cursors, I download/make individual cursors and customized them, saving the general group in a file I call 'custom cursors', I don't download entire packs. I never have to reload the cursor set I'm trying to use, I just have to pull up the panel and click 'ok' to get back out of it, and this updates me to the custom cursors that were already on there, like the system knew I wanted them, but I just sort of had to remind it to activate them. For the Synaptics issue, I never had the problem before the Windows 10 update and I use the scrolling function a LOT.
My mouse has this crazy glitch since upgrading to Windows 10. I'll be scrolling and it'll stop all of a sudden and freeze for about three seconds. How can I fix this?
View 1 RepliesAnother issue tell me if u can solve this . Iam having synaptics touch pad in which scrolling feature is not working in win 10 ,was working in windows 8 .
View 7 RepliesI updated to Windows 10 this morning, and after doing so realized that my side scrolling on my mouse pad (I'm on a laptop) doesn't work anymore. Googled, found out it was a driver issue, and went to download the correct driver.
However, acer aspire drivers don't have the touchpad driver updated for Windows 10 yet. Do I have to wait until the driver comes out to fix this issue? If so, how long that could take? (They have the important drivers updated already, those for bluetooth and wifi)