Touchscreen Stopped Working Shortly After Updating
Aug 16, 2015
I updated my computer (Asus X553MA) to windows 10 a few days after the release became available for my computer. Up until the upgrade from windows 8.1 update, I was having no problems with my touchscreen whatsoever. But once I upgraded, my touchscreen and touch pad functionality ceased to work. I went to the I installed all the windows updates (not like I really had much of a choice to begin with), and installed all of the updates available for windows 10 from the Asus webpage. I managed to regain all of my multigesture touch pad functionality, but my touchscreen still ceases to work.
I saw in one of the other forums that going through the device manager and modifying some settings, you are able to get your touchscreen to work, but the setting that needs to be modified, is not available on my computer. I have also restored my computer to a point after the upgrade to windows 10 to where I knew my touchscreen was working, but I've had no luck.
Problem: 1) Since updating to windows 10, Laptop completely incapable of making any sound out of the speakers. 2) Headphones plugged into jack produces no volume out of earbuds 3) The Color of the volume slider when F9 or F10 is pressed is a light yellowish orange. Not the Usual Green 4) Playing a test tone creates an error box "Failed to play test tone"
Things I have Tried 1) Downloading a new Driver (failed) 2) Resting the sound and Sound system (failed) 3) Finding the mute button and unmuting the computer (it wan't muted) 4) Restarting the computer Edit: 5) Tried to switch playback options, There are only 2: 24 Bit: 48000 Hz, 16 Bit 48000 Hz (DVD quality)
Solution I want: 1) My toshiba to actually play sound out of speakers 2) toshiba to play sound out of headphones.
I'm not sure if this is a hardware of software problem. Any way I'm posting it on both Toshiba and Windows 10 Forums.
So, I was updating the graphics driver, and the computer rebooted itself, when it turned back on all I saw was my chosen accent color in the frame of my main monitor (I have 3). I then turned off the computer, removed the card, and plugged one of my displays into the MOBO. The PC booted just fine, and ran normally. I turned off the PC, and put back in the graphics card and booted back up, I got the same thing. I'd been meaning to do a system refresh, so I chose then to do that. I did the refresh, and now whenever I have the card in the PC, I get stuck at the HP Boot screen (not letting me enter the BIOS) and the PC beeps once, then not again. I turn off the PC, remove the card, and Windows runs perfectly.
I can tap the screen and operate scroll bars but cannot change pages or scroll by simply flicking. This seemed to begin after an update called eGalax USB touchscreen. I can't find it and the normal HID USB touchscreen device is not in my device manager, it is however in hidden devices and greyed out.
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
All my documents and pictures get set to Read Only sometime after installation. There is no way I can set them back to normal. I have tried every way that is suppose to correct the problem. Right after installation everything works like it should. After some normal use all files are set to Read Only.
Not positive of this but it appeared the files were set to Read Only when I tried to use Xbox after the recent installation. I'm now back to Windows 7 for the third time. The following will not correct my problem. I get a message I need admin permission even when I'm signed in as admiistrator.
CMD attrib -r D:my-folders and the files attrib -r D:my-folder *.*
Last night I have updated my laptop (Alienware mx17r3) to Win 10 Tech build 10041, updated all my drivers now my display port is not working, When booting I can see it showing BIOS and post screen but once I am in windows just goes dead with a msg no display port detected. Running my laptop screen, dell ultrasharp-u2913wm (Display port) and dell S2340L (VGA) port. On VGA both screen works fine no problem but as soon as I try running on display port dead as a doornail. I checked device manager its not even detecting the 3rd screen. Have updated latest drives from intel and ran windows update but to no avail.
Windows bottom task bar has stopped working after windows 10 up date. Windows logo, search, and task view all not working. computer boots up fine no issues at all. except for the task bar.
Mic stopped working after windows 10 update. I can't raise the db levels and it does not record any sounds. Its like its muted all the time, but i cant unmute it. Its an HyperX Cloud II if that matters.
Win 10 was working well on my Toshiba Satellite.(i7 4 gig ram).Then I lost the ability to download with Cannon Camera software. This program stopped working. ( got off pictures by removing SD card and putting it direct in laptop.)Next computer slows down and run st 55 to 60 Deg C. (air temp about 23 deg and desktop computer running at 35 deg.)
Then Blue screen telling me Video_Krnl............ failed/error.Ran restore point and system worked again for a while(2 days).Now I can only get 3 to 4 minutes before blue screening and failing. Have blown out cooling fins but little to no dust as computer is only just one year old. Regularly run AVG and Wise 365 cleaner over it.
This morning when i turned on my computer the sound was not working.I reinstall all my sound drivers, i reboot my computer a lots of time, i cheked if everythings was pluged correctly and everythings was supposed to be fine but the sound don't work !
Recently i have upgraded to Windows 10 from Windows 7. Everything was fine the first hour, then all of the sudden the mouse stopped working and it was no where to be seen. The mouse that I use is an old Logitech mouse that has a ball to control the mouse. So, I plugged in another mouse and it was working, but the clicks were backwards.
Recently discovered Windows Explorer stop working. Ran SFC /ScanNow result were some flies were repaired, which directed me to C:WindowLogCBSCBS.log, nothing found there. What to do, it was only by accident I discovered it was not working, no error messages or any signs.
The start button on windows 10 has stopped working for me. It came right after I installed a new graphics card though in the days before I had noticed strange stuff like when I searched for an app and clicked on its icon within the start menu nothing would happen. File explorer, settings etc stills works but are very slow.
I Tried to connect to my 2 other PCs this morning. I just get a screen where it says it's 'Initialising Display parameters' but will not get past this screen.
Was working perfectly yesterday! I can take control of these same computers if I try it from my Linux Ubunto PC. So that rules out the network and all of the other PCs which are still on win7
I tried the other day to search for a program on the start menu and it worked fine. I then set up Cortana for speech mode and all I get now when typing in the box are four blue dots scrolling at the top of the search box.
My start menu stopped working several weeks ago and I have been trying all the suggestions found of the various forums with the exception of reloading Windows 10. It looks like Microsoft should be responsible for publishing a solution to this problem realizing how many people are having the same trouble.
I have a Logitech wireless keyboard that uses a USB device. After a update on the 10 of March my keyboard stopped working. I have tried another wireless USB keyboard Mircosoft and a a wired Microsoft keyboard without success.
I have followed a few of the suggested fixes after doing a search without success.
On October 29 the start button and the Windows 10 taskbar stopped working. I have called Microsoft tech support and chatted online five times but they have not been able to resolve the problem. Windows 10 worked alright for over a month, but then this problem occurred. I believe there was a Windows 10 update around that time.
my most used App the Windows Weather app has stopped working, I click on it to open and it open and then closes again right away. Is there anyway I can fix this? Is it a common Win 10 app system fault with the app or is my PC specific that has the problem?
After upgrading to Windows 10 on my sony laptop my mouse will not come back on the screen after I close my laptop and the computer goes to sleep. I have to restart my laptop after every time my computer goes to sleep to get my mouse back on the screen. Just checked DM and the touchpad drivers are current.
My laptop has failed, the hard drive has stopped working, my question is having purchased a 750gb replacement drive can I download win10 directly to it using my tablet and an external drive then install the drive into my laptop to complete the installation.
