I have been having problems with my PC and recommended to do a HDD wipe. I decided I would knock down two birds with one stone and install an SSD during the wipe. I would like to wipe the hard drive then reinstall windows and some important programs onto the SSD. However, my system is pre-built and came with the OS already installed, and I do not have access to the product key for windows. I also am concerned because it came with Windows 8, from which I upgraded to Windows 10 and am worried that I will not be able to receive Windows 10 again.
Since I Upgraded my Laptop from windows 8.1. File transferring from Pc to any USB drive becomes very slow. Like in windows 8.1 the speed was 25 Mb/s to 70Mb/s, but in windows 10 it never gone above 15 Mb/s.
I'm talking about one of the below transfer boxes. I no longer see one when copying files so I have to guess when it is finished. It seems to have started after my last weekly update. I'm running Build 11082 with all the latest updates.
Now that I have purchased a Surface device I would like to transfer my laptop to my spouse. However, when my laptop turns on the only choice I have to sign in is my own account. How do I transfer main ownership to her such that when the laptop comes on it is her name that comes up?
So, i have a new HDD with Win 10 installed. What i'm wonderering is: Can i transfer files between my old HDD with win 10 (home) and my new HDD with win 10 (pro). I know that tranferring files between win 7 and 8 creates problems.
Upgraded to W10 from W7 several months ago now and activated and used only the built-in Administrator account. Which is what I have done for many years now to stop the UAC popups.
However, I have soon discovered this Administrator account, while blocking the UAC popups has some serious limitations. Like cannot run Edge or any of the Metro Apps. Yes, I have tried the workarounds but they too have issues.
So how can I transferred all my settings for my programs and windows to another local username?
I finally got me a BSOD on my windows 10, on laptop. I was tranferring some music files from my ssd on laptop to an external hard drive in a wifi hdd enclosure. The error is "EXFAT_FILE_SYSTEM (EXFAT.SYS)".The HD (WD10EADS) in the enclosure is formatted in Fat32, and I was thinking that might have something to do it the error. But the HD has to be in Fat32 in order for the WIFI enclosure to be able to see the HD, per the instructions of enclosure.
Is there an easy way to transfer the contents of the libraries on my old computer (Windows 7) to my new one (Windows 10)? All the files have been transferred to the new computer and are in the same location as on the old one.
With Win7 I used to open one external drive, then through My computer locate the other drive. I would have each drive on its own window. I could then select relevant files on one drive copy and paste into the other drive. With Win10 if I click on File explorer I can open one external drive, where can I locate the other drive to put in a separate window. If I click on the other drive, it just opens it in the same window. Win7 and previous versions used to be so simple.
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk. During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
I have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Shadow Copy Storage association For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
I currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
My laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
So I'm wanting to start with a clean slate on my C: Drive (SSD) by blowing it all away and reinstalling windows. However I would also like to leave my D: Drive (HDD) as it is. Is it possible to do so without backing up my D: to an external drive as I do not have one?
As of my attempts so far the only options I have been given are the ones in my picture attached .....
Basically, I plan to disconnect every other Drive from my computer (my 2nd SSD and the HDD I use for data storage). From there, I'd do a clean install of Windows 10 onto my SSD.
Will that SSD become my C Drive by default (I want it to)? Will is stay that way when I reconnect my other drives provided I continue to boot from my SSD?
1) the HD in my laptop was dying, so I ordered a replacement, and tried to create a recovery drive so that I could reinstall Win 10 when the replacement arrived
2) Windows asked me to use a drive of 16 gigs or larger for my recovery drive
3) since I didn't have any USB flash drives of that capacity, I used an old, 40-gig IDE drive (IBM Deskstar) that I connected to the laptop via the USB port; at the end of the process, Windows claimed that the IDE drive had been successfully formatted
4) the replacement HD arrived; I inserted it into the laptop and re-connected the IDE drive via USB
5) when I turned the machine on, it seemed to recognize that there was a drive plugged in at the USB port, but it did not seem to be reading the relevant information on the drive: I got a menu with several options for installing/re-installing Windows, but when I tried various options, the computer did not recognize any "source" from which Windows could be reinstalled.
What I should do? The IDE drive has many possible pin settings (master, slave, etc.), of which I have tried several so far -- which setting(s) should I be using so that the computer is able to properly read the drive?
After cloning a new ssd the new drive won't boot. The bios recognizes it but the only way to get the machine to boot is to connect the old drive. I'm guessing I'll need to try to clone again or maybe install from the back up?
