Tune-up Utilities Compatibility Mode
Aug 8, 2015
I have Tune-up Utilities, and it has programs that run while computer is idle. When they start to run, I get a popup notification that OneClickStarter is running in Compatibility Mode. So I checked ALL the exe's for Tuneup and all of them have Run In Compatibility Mode UNCHECKED, including Change Settings For All Users. I'm getting tired of having to confirm it every time it wants to run in the background. Is it possible to turn off Compatibility Mode completely?
View 13 Replies
Similar Messages:
Nov 18, 2015
I used the Compatibility Troubleshooter and now I cannot select a compatibility mode manually or turn it off completely. Those options are grayed out.
View 1 Replies
Aug 7, 2015
I have an old XP program, xReminder Pro, that I have been using for many years. I am currently running it in Compatibility Mode on Windows 7 and it runs fine. On my Windows 10 test machine, this program will install and run from a "manual" start in Compatibility Mode (Windows XP SP3); but will not auto-start with Windows. I have tried the normal start with the program preferences, adding it to the Startup, and running a bat file right after boot up. None of these work. I have set the program to "Run as Administrator".
View 4 Replies
Jul 30, 2015
I have certain sites I use at work and I can't scroll the page or edit fields on it, once I open in IE (which is set to compatibility mode it works.
View 3 Replies
Jan 27, 2016
In my home theatre I have a Win 10 Pro PC , set up for Extended Display set up for:
- a large 4k TV (the default), with high res settings (Monitor 2)
- a small legacy 17" display, low-res settings (Monitor 1)
The large screen is the default screen, as that's what I need to be displayed when watching media, and controlling things via a wireless keyboard on the couch.
The purpose of the small display is simply so that I don't have to have to keep the large display on when:
-doing minor config/setup work
-listening to music via iTunes
-viewing the 'current' song being played on my digital cable box
-etc
It's more or less working well, but THE ISSUE IS THIS:
When working when both displays are on, and the active window in on the large display, I can select it and drag it over to the small display to work with. But when the large display is powered off, I am blind ; all I see is the task bar and whatever I launch goes , of course, goes to the default display.
-Is there any tool or utility I can use to virtually see the open window on the active monitor and so I can drag it over?
-Is there any tool or utility , like TeamViewer has, where there is a top level menu "Next Monitor" to manage the screens.
Ironically, when I do use Team Viewer from another room, its perfect as I can flip between monitors at will (as I am starting on the 'default' screen). But when I am in front the physical machine, in front of the small monitor, I dont have that option.
What I kinda need is the multiple monitor option of Duplicated displays, but that does not work because of the different resolutions.
I can use Show Desktop Only on 1, as I cant get there ( ie a right click will always show up on the large screen only as is the default.
I need to power up the large display, drag the window (eg iTunes) to the smaller display, and then turn off the large TV.
View 6 Replies
Jan 19, 2016
I've clean installed W10 on my Dell laptop and then installed my programs including the Dell utilities Dell Support Assist, Dell Quickset & Dell Digital Delivery.
I eventually decided these no longer offer me anything useful and have uninstalled them. However, Autoruns is currently showing the following are loaded:
Services:
Dell DataVault
DellDataVaultWiz
Drivers:
DDDriver
DellProf
Installed Directory:
C:Program FilesDellDellDataVault
I'm no fan of software which doesn't clean up properly after uninstalling it. I've disabled the above services and all is fine but I'm wary of disabling the drivers since I decided to keep the Dell Touchpad driver.
Can I disable these drivers and better still, is there a way of completely removing the Dell services and drivers which their uninstaller has failed to remove?
View 5 Replies
Aug 2, 2015
I have, so far (my PC was upgraded to Windows 10 two days ago), found two applications that don't appear to be compatible but weren't flagged ahead of time. These are AnvSoft Any Video Converter Ultimate and Samsung Kies 3. I'm guessing I'll find more as time goes on.
View 4 Replies
Aug 10, 2015
I have the "Sonic Studio DLA" uninstall issue and have done every trick I can find. One time I hid the Uninstall and continue button and it magically went on to install Windows 10 successfully! However the one issue I had was the bluetooth driver was missing so I went to install one from Toshiba site (Satellite L775) and it caused an error condition so I wanted to back it out but it was 2 am and I was tired so I tried the go to previous build option - expecting it to go to previous restore point of when it was first installed but no - It went back to Windows 7 and I am stuck at "uninstall Sonic Studio DLA" message again. Wife is happy because she wasn't that excited about learning Win 10 but I would prefer to have it upgraded anyway and she balks at the clean install. So I know Windows 10 works and message is not accurate , so how do I bypass it? Will a quiet install or unattended with answers bypass it?
View 2 Replies
Dec 8, 2015
Every time that I start up my laptop and load up my desktop, Compatibility Assistant gives me the exact same reminders every time. What do I need to do to stop this constant notification every time that I start up my system?
Notifications:
We turned on Windows Defender
Spybot - Search & Destroy was removed
This app is no longer available
Lenovo VeriFace was removed from your PC because it doesn't work on this version of Windows.
This app is no longer available
Dolby Digital Plus Advanced Audio was removed from your PC because it doesn't work on this version of Windows.
View 2 Replies
Jan 11, 2016
The action center informed me that CCleaner was not compatible and was removed. Every time the PC is booted, it repeats that message. I have tried removing every trace of CCleaner I can find but it still repeats the message at boot.
I don't want to turn off notifications, only stop it from telling me CCleaner was removed!
View 2 Replies
Jan 20, 2016
I've found two sites (so far) that have scrolling compatibility issues with Edge. Musician's Friend: Musical Instruments Store is one and the other is the Cakewalk/Sonar forum [URL] ...
In either site, I can scroll (vertically) through front pages without problems. But, when I get into individual threads, for example, and try to scroll though them, either scrolling slows down to very slow or stops.
It would seem to be a setting in Edge, as I have another desktop (my recording studio backup system) with the same version of Win 10 (Pro 64 bit) and it does not do it in that system.
I've reset, to default, all the settings I could find in Edge.
View 5 Replies
Sep 12, 2015
Is there an application that will check the compatibility of all existing hardware and software in my Win 7 Home PC before I begin an upgrade to Win 10?
View 5 Replies
Dec 22, 2015
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
View 2 Replies
Nov 21, 2015
I have a notebook with nVidia 860m video card. There is GeForce Experience preinstalled and it recommends to update driver. Problem is: Win 10 does not recognize 860m after rebooting my system when I install nVidia's fresh drivers. I don't understand that sort of problem because I always updated drivers on win 8.1 without any problem, win 10 is updated regularly. So if I am interested to install recommended updates, is there a way to understand will it work or not after reboot without actual install? I tried to installed drives via devices manager, it is installed without any problems but does not work after reboot.
View 9 Replies
Jul 29, 2015
I turned on high contrast mode. Now it won't change back to normal mode no matter what I do. I tried selecting None in the dialog box for high contrast mode and all the other modes.
View 1 Replies
Aug 4, 2015
My machine will go into hibernate mode, but will not go into sleep mode. I just want to be able to wake it with the touch of the mouse.
View 1 Replies
Oct 20, 2015
I'm trying to understand why I would want to use tablet mode. Apart from the minimize, maximize and "x" buttons found in desktop mode. Aren't the modern tile apps that you can launch straight from the start menu in desktop mode, exactly the same as the ones in tablet mode? Apart from the apps being full screen.
If so, I'm thinking I may as well just stay in desktop mode and launch the apps from the start menu in desktop mode?
View 9 Replies
Aug 20, 2015
Due to there not being an F8 boot command screen any more I had to go into msconfig to change how the computer starts up.. which is now set to safe mode. So I'm in safe mode (on the other computer).. the problem is I cannot figure out how to reset it to start up in normal mode. The 'search windows' box at the bottom will not allow any text to be entered.. unless I can get to msconfig by looking for it in safe mode.. I'm stuck in safe mode. How to get to msconfig in safe mode without typing it in? again the msconfig was changed to have the computer start up in safe mode.. it's now doing it every time.. even after a system restore to 4 days ago.
View 2 Replies
Aug 25, 2015
I put my PC in safe mode but when I try to get out I can't I press the windows key and the R and then put msconfig. A window opens but it closes right after.
View 6 Replies
Dec 2, 2015
I have a HP Envy that is only 11 months old. I installed Windows 10 not too long ago and now I am experiencing issues with the sleep mode function. I have tried many other suggestions in power troubleshooter and other "fixes", but nothing is working.
Here's the issue. When my laptop enters sleep mode, I cannot wake it up. The keyboard is unresponsive with the exception of the backlight key. No matter what I do, I cannot wake it and this includes Ctrl + Alt + Delete. The power button remains lit, but the screen remains black and will not wakeup. The only way to fix this is to hard reboot the laptop by holding the power button down until it shuts off and then reboot it.
View 1 Replies
Aug 2, 2015
I have a MSI board and cant seem to find how to run windows 10 in safe mode
View 1 Replies
Dec 1, 2015
I knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.
View 2 Replies
Sep 28, 2015
How do I set the view to be always in list mode ?
It defaults to details mode and I'd like list mode.
View 2 Replies
Aug 24, 2015
I was having difficulty with flashing and went into safe mode to try to figure out which program was causing it but now whenever I reboot I am still in Safe Mode.
View 8 Replies
Dec 12, 2015
I have a Toshiba Click 10 lx0w-c-104 that is stuck in tablet mode, how to revert to computer mode.
View 2 Replies
Sep 5, 2015
how it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...
View 6 Replies