Turned Off Display Black Screen / No Mouse
Aug 5, 2015
While using PowerPlanner7, I believe I may have accidentally turned off display or brightness to 0. I am unsure if I successfully made it back to the desktop after rebooting(my attempt to solve the problem). I have tried searching the Internet for shortcuts that re-enable screen or turn brightness up(my keyboard brightness buttons do not work since I am on Mac and the functions keys are all remapped- holding fn then function is same as just pressing function now too)
View 5 Replies
Similar Messages:
Jul 20, 2015
This morning I turned on my HP All In One and the screen stays black. I had 10220 loaded but I don't know what happened until I went to this forum on my other system and discovered 10240 was released.
View 7 Replies
Dec 1, 2015
So I have a bit of a problem where my screen flashes, I instantly thought it was display drivers so I uninstalled them only to worsen the problem, the computer restarted with a black screen which later turned into a desktop screen with no icons and a flashing screen (can't click anything or even load up the start menu with the windows key). I put it into safe mode but it does the same thing. Nothing works except task manager and i can't run task from it or it will exit out, system restore doesn't fix the issue either. Computer is a lenovo k450 i5-4440 8gb ram 1tb hdd with an evga gtx 760.
View 1 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Dec 30, 2015
I every now and then, but lately too often, get a pop up and my screen goes black..that the intel graphics display was not working but has been restored..then after 20 seconds or so the screen comes back on...BUT, it mentions for Windows 8..I have a new PC with windows 10.
View 1 Replies
Dec 3, 2015
i've just upgrade to windows 10 nd am facing black screen with cursor
View 4 Replies
Oct 24, 2015
My mother has a HP Touchsmart 600 that I upgraded from Windows 7 to Windows 10. Windows 10 works fine on there, once it finally boots up. I've noticed this scenario. Power Button to turn on computerBIOS DisplaysWindows 10 logo displaysscreen goes completely black for a couple of seconds Screen comes back on, stays dark/gray and I can see my mouse pointer and it moves. The boot process hangs here for several minutes, usually and most of the time, the computer doesn't even go past this point.EVENTUALLY, after several minutes, Windows 10 finally gets to the login screen, if it is going to login.
View 6 Replies
Aug 3, 2015
I upgraded a desktop computer from Windows 7 ultimate to Windows 10 and there seems to be an annoying black screen issue which happens before the login screen.
After the Windows loading logo, the screen stays black for about 60-80 seconds (and all I can see is the mouse cursor). After 60-80 seconds, the login screen pops up and everything works fine and I can login.
I already tried the following:
- Updated NVIDIA drivers
- Completely removed NVIDIA drivers to see if it was a drivers problem
- Booted into safe mode, still happens
- Checked event viewer, nothing weird in the logs
- Made the PCIE slot the default slot for the primary monitor in the BIOS
- Ran the sfc /scannow command, no violations found
- Ran all Windows updates
- Took a look at the services and startup processes, nothing weird here
- Turned fast boot off/on, no change
- Full Malwarebytes scan, no infections found
I ran a xbootmgr trace log, here's the summary XML file: processSummary numProces - Pastebin.com
I'd like to keep the fresh installation option as a last resort.
View 4 Replies
Jul 7, 2015
Afther installing the intel chipset driver the pc crashed showed a blue screen with large tex saying that the pc run into a problem and is collecting data. Then it turned off and started booting went past the windows booting logo and than showed a black screen with a mouse pointer that constantly changes between loading and busy... you can move the mouse pointer on the black screen and nothing else... I can't boot the laptop and I don't know what to do
View 1 Replies
Aug 15, 2015
i upgraded my windows from 8.1 to 10.evrything seems fine but when i launch my games it won't run.i run dxdiag then i noticed that my intel vga and nvidia 840M's driver were uninstalled. I open the ASUS installer and installed my display driver.when i reboot, the screen goes black with the mouse cursor in it after ASUS logo.3 leds were lit.the hdd led is blinking. i reboot several times and hit F8, unfortunately nothing happened.
View 1 Replies
Dec 3, 2015
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 Replies
Oct 26, 2015
So I recently gave my laptop an update today. It was fine before but...now it boots to a black screen with just a mouse pointer visible. What should i do?
View 1 Replies
Aug 24, 2015
Installed Windows 10 on HP Pavillion p7-1262 about 2 weeks ago. Worked fine up until last Friday, screen went black, no keyboard entry, no mouse cursor. Can't enter BIOS. Whats wrong?
View 3 Replies
Aug 11, 2015
I have an HP Elitepad 900. The problem I seem to have is when I press the power button to turn off the screen, the screen turns off but the backlight stays on.
View 2 Replies
Sep 12, 2015
The laptop works fine with a keyboard but whenever i try connecting a mouse it stops sleeping or dimming and i know it's not the mouse because i tried it on a different laptop (windows 10).
View 1 Replies
Nov 30, 2015
I have a PC with the following configuration:
Intel Core I5-4460 Haswell 3.2GHz
GIGABYTE GA-Z97-D3HKingston
HyperX Fury Blu 1x8GB DDR3 1866MHz CL10 1.5V
Kingston SSDNow V300 240GB + SAMSUNG Spinpoint F1 HD753LJ 750GB
SeaSonic S12II Bronze 620W
Cooler Master Haf 912 Compact
I always used to set the turn off display after 2 or 3 minutes, everything was working fine with my old PC but after the new PC whenever the screen is turned off i can't turn it on again buy using the mouse or keyboard.
This problem was while using windows 8.1 and after installing windows 10 pro the problem is still there.
Tried turn off hibernate solution but with no luck.
Connection with monitor is throw HDMI cable with the internal Intel 4600 VGA Card
View 1 Replies
Aug 7, 2015
As the title says, I can't set the bg image in windows 10, at first it worked perfectly but after a couple of days i cannot set a bg image, if i set any photo as the bg its just a black bg.
Asus VivoBook R553LN
intel core i5 4210U
nvidia GeForce 840m
View 1 Replies
Feb 1, 2016
Recently I downloaded a program but it came with a ton of malware. I booted my laptop in safe mode and ran a bunch of malware removal programs. When I tried to boot my computer back up, the screen lit up and turned grey.
View 1 Replies
Oct 19, 2015
My screen saver does not work when my computer is turned on. I have to "restart" it and then the screen saver works.
I have not added anything or changed anything and all of a sudden for the past four days this has cropped up.
I have the bare minimum items in my start up folder.
View 5 Replies
Dec 5, 2015
Ever since the newest major update, my PC has stopped resuming from sleep. It'll boot up (I think) with the keyboard and mouse lit up but the screen always stays black. Takes a hard reset to get it running at which point the sleep data is gone and wasted. I've had allow hybrid sleep on or off, had USB suspend enabled and disabled, disabled fast boot and hardware fast boot. I changed a lot of settings I thought would be related and nothing. Nothing makes the slightest difference.
View 9 Replies
Oct 5, 2015
When i upgraded to windows 10 on my toshiba laptop the display changed from black printing on a white background to blue printing on a black background which i can"t read. my old eyes aren't working so well any more and i would like to switch back to the black on white.
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 10, 2015
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
View 1 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Jan 2, 2016
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 Replies
Mar 5, 2016
Today I have been using my PC as usual, I got info of Windows Updates (I'm using Windows 10) I opened up the updates and restarted my PC. As the PC was launching I got no display at all. Blank screen, nothing at all as if the PC was not detected. I tried restarting PC, removing graphics card / ram then replacing them but no use.
View 1 Replies
