USB Device Hangs
Sep 29, 2015
I first noticed this after upgrading to Windows 10, it is possible that it happened beforehand but I'm confident that's not the case.Essentially at random intervals, several minutes apart, my USB devices just hang. Most noticeably with the mouse, I get a split second where the mouse can't move and then it jumps to where it should have been when I originally moved it. Same thing happens with the keyboard but it's slightly less noticeable. I've noticed this with my headset as well which is really irritating because it still doesn't make a disconnect noise but for some reason I have to unplug and plug it back in again to get it to work.
It happens on the USBs connected directly to the motherboard but also the front ones as well. There is no disconnect noise when this happens, nothing else hangs it's just the USB devices.The first thing I did was upgrade to latest chipset drivers etc. This did not fix the issue, so I did a clean install of Windows 10 and I'm still having this problem.
Specs:
GA-Z87X-UD3H
i7 4770k
8GB DDR3 RAM
Samsung SSD 840 PRO 120GB
1TB Seagate ST1000DM003
GTX 770 4GB
Seasonic M12II 750W Bronze
View 1 Replies
Similar Messages:
Sep 12, 2015
i have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
View 4 Replies
Oct 30, 2015
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 Replies
Jan 17, 2016
I recently put my camera memory card into my computer to download photos. I couldn't open them and need to leave so hit "remove device" figuring that I'd go back later when I had more time to get them. When I went back and reinserted the card it didn't show up. I've tried to "add a device" but it still doesn't work. When I hit the device and printers icon it doesn't show up. What do I do?
View 4 Replies
Oct 15, 2015
I just upgraded to Windows 10; not much problems for me, except one that I really wish I new that before upgrading.
Let me just say this; the Windows 10 app on my pc (running Win7 Ultimate) did not say anything about this issue, that's why I upgraded.
Under my windows 7 I had 2 Realtek RTL8168D PCI-E Gigabit Nic; which I had setup for teaming with the Realtek Teaming Utility; after the upgrade I found out that utility was not compatible with Windows 10, which sucks.
My real problem is under the Device Manager I only see one (1) Nic listed.... is this normal for Windows 10?
Also, how to setup a NIC Team without using the Realtek utility?
View 1 Replies
Oct 10, 2015
I connected an audio cable to my laptop but when windows asked what the cable was i accidentally checked the box that said microphone. Now i can't change it anymore and my audio device is in the recording tab instead of the playback tab. How do i change this?
View 1 Replies
Aug 26, 2015
I have a Samsung RV511 and have recently tried to upgrade from win 7 to win 10. Everything goes smoothly until the restart after everything is downloaded. My laptop restarts and then hangs on the win 10 logo.
I tried restarted and win 7 loads up and im greet with this message once I log on: 0xC1900101 - 0x20017
The installation failed in the SAFE_OS phase with an error during BOOT operation.
View 1 Replies
Feb 10, 2016
I just upgraded my neighbor's computer from 7 to 10. All went well EXCEPT for a small glitch. I set it up without a password and it boots to desktop really fast. Upon her checking it out she wanted me to set up a password to keep her children from logging on to it. I did. The password works OK BUT just before the screen asking for the password the computer hangs at the time/date screen. The screen is a pic of a seascape/beach looking through a rock tunnel. I've seen this screen after a computer wakes up from sleep. It will go on if you tap a key. Any way to bypass/stop this screen from showing. She didn't have it with 7 using a password. I tried msconfig with no GUI boot but it doesn't work.
View 4 Replies
Oct 19, 2015
when I disconnect from my work VPN, sometimes it hangs at "Disconnecting".
the only indication is when I try and reconnect nothing happens the "Connect" button just flashes.
the only way to reconnect is to reboot.
am I the only one getting this, and if not is there a solution to this behaviour??
View 1 Replies
Mar 5, 2016
Every time I try to reinstall Windows 10 it always hangs when I have to input my time zone, no keyboard inputs or mouse registration however keyboard and mouse works on BIOS, this is the screen that I get stuck at:
[URL]
View 1 Replies
Aug 15, 2015
Every Microsoft update that I have whenever I restart my PC it always hangs at 30% and the little loading icon freezes
View 9 Replies
Jan 9, 2016
Win 10 hangs in the boot process. It hangs at the point where the login screen should be appearing. Actually it is the step before that as I don't get the picture. The system goes to a black screen and becomes unresponsive.
This used to be a dual boot machine, Ubuntu and Windows. I have the machine only trying to boot windows. The grub menu system has been removed.
Along the way I used the Ubuntu gparted. This tool is telling me that there is a corruption problem with the Windows OS partition. The RECOVERY partition looks clean.
Now if I strike f10 (I think) during the boot process I can get into the recovery menu system. If I choose to fix startup problems I can eventually get to a very scaled back version of Windows without networking. The debugging mode doesn't work and the boot logging mode doesn't work. I don't see my own account login but rather get an administrator account that seems to be built into windows. This account doesn't let me do simple things like turn on the networking.
I guess I need to create some kind of a recovery thumb drive that will allow me to boot things "normally."
View 4 Replies
Sep 25, 2015
Nine times out of ten the shutdown procedure on the recently installed Windows 10 O/S hangs on shutdown. The only way I can close down the system, after a suitable pause, is to turn off the current, which doesn't seem to do any harm as the system restarts normally the next time I boot it up, but it irritates me considerably.
I am running an HP Z230 tower PC with an Intel i7 processor, 8 GB of RAM, 990 GB hard disk and a 64bit O/S.
View 2 Replies
Dec 22, 2015
I upgraded from windows 7 pro x64 to Windows 10 pro x64. Since the first time I upgraded, it's all good the first 10ish minutes, and then nothing works.If I open a new tab in Edge, that one doesn't load. If I click a link on an existing page, it doesn't load.
The windows menu shows up when I click it, but I cannot search anything in it.If I start a new application, it doesn't start it.Win-R does show the command runner, but anything ran there doesn't start (even cmd or notepad) (no matter which app, explorer, notepad, etc...).
Restart/Hibernate/Shutdown doesn't do anything.I have to force reset (hardware button) to be able to use the computer another 10ish minutes before it becomes unusable again.
I tried removing many services/apps at start-up, didn't work. Malwarebytes and panda antivirus didn't find anything wrong. Repair start-up / system didn't work. So I performed a clean install of Windows 10 (still pro x64).
View 6 Replies
Dec 19, 2015
I have been recently noticing that my computer sometimes hangs up with a blank screen when the windows 10 login screen is supposed to load. I am forced to press the reset button in order to eventually log on.
I have then noticed through event viewer a bugcheck warning. I have been trying to find what the cause or issue might be but I have not had any luck. I am attaching a report as per forum rules
View 9 Replies
Nov 3, 2015
When i start the laptop it stops at the dell logo and does nothing till the time i dont press a key. After pressing a key it starts log in.
View 1 Replies
Oct 29, 2015
I am running Windows 10 (64-bit), but this problem also occurred on 8.1 and 7 (both 64-bit) with clean installations. I am also dual booting Ubuntu Studio 15.04, but more on that later.
When I boot my PC into 10, I have up to ten minutes before my PC either resets forcefully by itself, or freezes and never recovers. When I check the Minidump folder afterwards nothing is there.
I have replaced both my CPU (amd fx-6300) and PSU (corsair cx500m), and tested my RAM (with both sticks or just one), but none of that has fixed the problem.
My BIOS settings are at their defaults, no over/underclocking or over/undervolting at all.
The odd thing is, Ubuntu Studio runs fine with no crashes as far as I can see *EDIT: NOT THE CASE* , but if there was a software problem surely there would be a dump file?
View 2 Replies
Jan 26, 2016
So I got a new laptop - MSI Dominator Pro GT72. I added two 8GB sticks of RAM on top of the current 16GB currently in it. It also had two Kingston m.2 SSDs in RAID 0. It was running with out any problems what so ever. I decided after that I actually wanted the ssds as two independent drives. So I removed the RAID setup and did a clean install of Windows 10 back on. That seemed to install all ok.
Then In the process of installing the drivers from the provided MSI disc it hung and then restarted. Then ever time after on login it froze a few seconds in. I thought I'd try a clean install again on the other SSD this time just to see if it reoccurred. Sure did. After installing some of the drivers and using the machine it crashed again and froze on login. I even tried all the updated drivers from the msi website instead of the ones on the disc.
I've run a memtest and absolutely no errors. I've updated the bios and firmware also. I then began running verifier to see if I could find a culprit. I got a BSOD before login repeatedly. I then got down to only selecting a bare few drivers in the test and was able to login with no BSOD. When I ran verifier with combinations of drivers they worked sometimes and only really seemed to crash when i stacked more and more drivers for it to test. I'm not sure if its suppose to work that way or not.
I thought it might have something to do with me separating the m.2 ssds from the RAID. I should mention that there is a 1TB hdd also in the machine.
View 2 Replies
Aug 30, 2015
I am currently using windows 7 64-bit.
I downloaded windows 10 from the ms site (the automatic icon never appeared on my pc), and am using the media creation tool.
All goes fine until 'Getting Updates', when it hangs on 'checking for updates'.
I have tried playing with the settings in Windows update, but suspect the problem lies in there somewhere... my windows 7 was recently proving unable to install all its updates also. I've tried various solutions for that but no luck.
Is a clean install the answer?
View 1 Replies
Oct 18, 2015
I'm upgrading to Windows 10! But it hangs on this part... How to speed this part up?
View 2 Replies
Dec 10, 2015
My newly built computer is borderline unusable due to constant hangs - the computer will frequently pause then continue after about 45 seconds, which makes doing any work basically impossible. During the course of writing these few sentences running the log collector, and uploading the logs, it hung 5+ times. The only programs that typically are running are Word and Chrome. BSODs are less frequent, but still an issue.
This is tied to the network card, but maybe there is something else (or multiple things) going on.
debug-LUCK-PC-Thu_12_10_2015_172655_79.zip
View 5 Replies
Aug 27, 2015
When I restart my computer, ie after installing an update, it hangs at the restart screen and I have to press power button to reboot system.
View 3 Replies
Aug 8, 2015
Hang in Windows 10 when using Microsoft Edge?
It has happened to me two or three times, so I've had to stop using Edge.
It happens when I'm actively using Microsoft Edge for some time and then suddenly the all the system hangs. All frozen. I can't clic on anything and the clock in the taskbar is completely frozen. Can't do anything. I can see there is some disk activity ongoing because the HDD activity led flashes. Only solution is hard-reset.
View 9 Replies
Jul 17, 2015
When I click on the people app. The app hangs and instantly crashes a few seconds later. Also we are less than 2 weeks until the official release of Windows 10 and they still haven't fixed the people app.
View 2 Replies
Jan 19, 2016
So, Alienware sent me a replacement M18 last week with better specs than my old one. I had this issue on the old one, but chalked it up to the other problems it had. This laptop has been in my hands since last Friday. The issue is, video play back of any kind, any browser and any app causes the entire system to hang. It forces me to do a hard reset every time. Everything else works perfectly. Absolutely no issues with any video game. I thought it was maybe gfx related but nVidia said it wasn't and get with Alienware.
Before I went to them, I thought I would try microsoft support techs... After remotely connecting they suggested a fresh install of the os. So now my pc has a completely fresh install of the os and still has the problem. The issue happened before and still remains after updating all drivers. I just finished talking to alienware support. They connected remotely, checked all the drivers, ran several diagnostic tools and said everything looked perfect. The tech suggested the cpu is spiking in temp and they would send someone to replace the heat sink.
But the monitoring software he used shows the temps to be around 68C to 75C even when I recreate the issue and it hangs the last reading is normal. So I don't think their solution is correct. I'm attaching the Sysnative BSOD Dump + System File Collection App and Administrative Events. In this info, I recreated the issue at 10:50am according to the computers clock. It just doesn't make sense that a brand new computer would have this problem, especially when everything else works just fine.
Attached Files
Administrative Events.zip 53.68KB
DESKTOP_HV7SDAC_1_19_2016_11_00_46_AM.zip 360.56KB
View 5 Replies
Nov 9, 2015
Since 2 or 3 weeks when I switch on my notebook, after loading my desktop it hangs loading startup programs.When it hangs, I can't even shut down, I have to press the power button 4 seconds to shut down.It happened with my 3 notebooks, but it remains only in one of them.This problem remains in an HP EliteBook 8540w running Windows 10 Pro 64 bits. In this notebook I had uncheck the "Turn on fast startup (recommended)" when I installed Windows 10, because it didn't shut down properly.I don't know what to do, I tried SFC and DISM tool, both found errors but were unable to correct them.
View 5 Replies
