I've bought a Huawei E3372h modem (with GTmobile simcard) but it doesn't connect. The modem says 'connected' and does recieve/sent KB's but on the window toolbar network logo says 'no internet connection' (yellow triangle mark).
Attached Files :
MTS-829F-1.jpg 11.24KB
Error message.jpg 93.91KB
So now after continuously getting about 8-9 BSOD's back to back while connecting my phone as usb modem , it has started to bother me too much
It occurs only after i connect my 3g phone as an internet modem.
I have included the dump files using dm_log_collector
ABHAY-07-12-2015_203503_72.zip
I've got a big problem win my Win10. Every time i install 10 it has no internet connection, it shows that none connections are available and tells "Modem has reported an error (error 651). Everything is working well on Win7. I tried many things to fix it but nothing seems to work.
My network card is Qualcomm Atheros AR8171, and modem is some TPLink
I updated my sys to windows 10 one month ago. I had a smooth experience on network accessing but now my system internal apps are not connecting to internet(like windows store, Maps, sports, Food & drink etc). But I can able to browse using browsers(browsers are connecting to internet).
Connection - Wired Connection Not limited.
I checked DNS settings too but no solution.
I recently got this problem. I restored, restore said it didn't complete, but problem is solved. However I have been having repeated connection issues. Not sure if it could be a hard drive failure imminent problem, or due to the forced update/installs Win10 makes me do.
View 2 RepliesI'm having an issue with my browser not connecting to my internet. I have no issues connecting to my email, Skype or steam. I just can't connect to webpages like Google. I have recently updated to windows 10 (from windows 7) but for the first day and a half everything was working fine. I have already tried uninstalling and reinstalling my network drivers and updating them for windows 10. I have tried restarting my router and PC 100 times. I have run multiple virus scans using Malwarebytes v.2.2.0.1024 with no show of infection. I have also tried using the commands to reset my TCPIP and Winsock in cmd (admin). My WiFi on my phone, tablet and laptop work fine.
I do want to mention that the second I updated my network driver for windows 10 all the webpages I had open loaded. But if I tried to open a new webpage it would not load. The message I get says "This webpage is not available. ERR_NAME_NOT_RESOLVED" and I sometimes get "This webpage is not available. DNS_PROBE_FINISHED_NXDOMAIN" on Google chrome. I get "Server not found" on Mozilla Firefox and Microsoft Edge doesn't even give me a message, just a blank page. Is there anything else that I can try?
I've decided to go back to Windows 7 and that has fixed the problem.
Soon after downloading Windows 10, problems started emerging. Nothing happens when I click on the the icons for home, cortana, connecting to the internet, or power. It is impossible to establish an internet connection, the troubleshooter "couldn't identify the problem". The audio service is also malfunctioning.
I tried to run a recovery, but was unable to do so, as "The Volume Shadow Copy service used by System Restore is not working". I ran sfc/scannow several times, and the result is that it "found corrupt files but was unable to fix some of them".
I have upgrade my windows 7 home premium to windows 10, but i found some problem.
Firstly, I can't change my desktop background / wallpaper, If I change the wallpaper or theme result is always blank
Secondly, if I connect to the internet my computer become slowly
This my computer specification :
Windows 7 Home premium 64bit
CPU i53210 M
Graphic card AMD Radeom 7670m
RAM 4Gb
I am having trouble with the modern apps and connectivity. It feels like half my computer will connect to the internet, and the other half won't. Desktop apps like Chrome, Steam, Outlook, iTunes etc. all connect to the internet fine, but any of the Windows apps like Xbox, Store and (most frustratingly) Settings will not connect.
In my network and sharing centre in the control panel it says 'You are not connected to any networks' - but in the system tray, and in the settings app it shows me as connected to my home wi-fi. I am on a desktop, and using a USB wireless adapter. I don't think the adapter is the problem as I have tried it on another desktop in our house on Windows 10 and it worked fine. Curiously also, when I click 'Adapter settings' in the control panel, it shows the wifi connection.
I've tried updating the drivers for the wireless adapter, both through the Windows update and adapter website but to no avail (and as I mentioned, it seems the adapter works fine elsewhere). I've updated manually to the latest Windows 10 Pro build, i've done a DNS flush, I've tried disabling firewalls and anti-virus, I've tried disabling startup apps, I've done a clean install of Windows 10 and still am unable to fix the issue.
I am using a Lenovo think Centre M57 pc, I installed the new Windows 10 operating system and like it very much, however my Huawei E352 Modem is not working on this operating system but it works perfectly in Windows 7. In Windows 10 it is being picked up as a Memory Stick but not a modem and therefore I can not connect either to the internet. I presume it must be a driver of some sort? If so, where can i download this driver that is needed?
View 9 Repliesi cannot connect to PPPoE connection through my modem. when i give username and password provide by ISP, it says cannot connect user nameor password is wrong, but i given correct username and password.
View 4 RepliesWhen I install modem MMX310G 3G USB MANAGER in windows 10, it shows driver installation failed and when open this app it shows no devices.
View 2 RepliesYesterday I relocated our Wireless Modem to a cooler room. We live in the Philippines so these devices can get quite warm...After relocating and hooking up all the wires, cables etc. My wife's computer a Dell, would not connect to the Wireless modem. I checked and replaced all wires with new ones, and rechecked the connections, everything was okay...I use a MAC which is still working fine, and connected right away, so I know the Signal is getting out. I did the "ping" command and it is not going thru. Tried everything I know, cannot get her wireless to work. I have a Red X on her adapter, in the Network Connections dialog box, "Not Connected"...Her system uses a Broadcom 802.11n adapter, which I replaced just recently...When I registered I added all the Dell system info, CPU info etc..
View 1 RepliesI'm sure there's enough variables that this could be some combo of software and stuff I have (I never use OneDrive - close it? I use Dashlane - it had Win10 issues, later resolved.) -- but does anyone walk away from their PC, come back and find online (cable modem/Ethernet in my case) - just stops working, in everything? Evernote, Firefox, Outlook, etc.?) Programs are fine (well, Outlook freezes in mid send/receive but...) but the online access is gone? And the only fix usually is a reboot?
Never happened in Win 8.1. Happens about once a day in Win10. Reboot fixes. Network troubleshooter finds nothing. If it didn't come back after reboot I'd be desperate, as it is ... I can live with it if I have to but... was hoping one of these "cumulative updates" would work but... doesn't seem to happen when I'm working, only if I stop a bit. Got a clue that doesn't involve powershell "fun" or registry/deep file mucking?
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 RepliesI have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 Repliesi just updated to Windows 10 and now my firefox, utorrent, filezilla and a few other programs have stopped working because of some port issue.
firefox does nothing.
utorrent says "Listen error".
filezilla says
Status: Connecting to 65.99.237.52:21...Status: Connection attempt failed with "10107".
Error: Could not connect to server
another program i use says "No interent connection or firewall is blocking MM Agent".
i tried to add these programs and port numbers to windows firewall settings but that didnt do anything. then i tried to disablethe windows defender and firewall using "services.msc" but still nothing.
i have also tried by disabling my antivirus(bitdefender)
How can i fix 5ghz connection? I am using a 5ghz usb stick and when i try to connect to 5ghz it fails. 2.4ghz works perfect. its a netis WF2190 stick ac1200
I have tried different drivers and completely resetting everything. i also tried resetting netsh winsock. when i boot back to win 8.1 5ghz works perfectly.I have a hp envy 15t-j000 intel 4900mq.
My laptop makes an annoying beeping noise when plugging in the charger or removing it. In Windows 7/8, if you went to your speaker properties and then levels, you could mute PC speaker and that took care of it. Don't see that option anymore.
View 9 RepliesWe have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 RepliesI have an Epsom RX560 (Printer/Scanner/Copier)
When Connected to Windows 10, it recognised the Printer straight away.
No need for the Install disk, it was up and running in just a couple of minutes and even without the install disk the results are picture perfect.
Is there somewhere in Windows 10 where it would recognise the Scanner instead of the Printer, or would I have to use the Install disk.
Yesterday I downloaded Windows 10 on my wife's laptop and she immediately lost access to my Brother MFC-8500 printer which she was previously accessing though a wireless network and a router. The Brother is hardwired to the desktop, which was also upgraded to Windows 10, with a USB cord and is listed under printers on the desktop as "Brother MFC-8500 USB." Could you give me the procedure and the syntax for making this printer accessible once again to the laptop? If the syntax requires the desktop's IP address, could you tell me how to find it because the tutorials on the Web still talk about the Control Panel which seems to have been replaced with "Settings."
View 6 RepliesI was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically
[Code]......
Okay, so i finished upgrading to W10 now, and when i plug in my corsair h2100. A wireless headset, Windows keep alerting or something with this wierd sound. It sounds like "damalam" and it is a non stop sound.
The sound is the Windows 10 disconnecting sound. But that's weird. nothing is being disconnected by it self.
[URL] ....
Solution : D-Link USB Hub is not currently W10 supported. That's why?
I have two Windows 10 Pro x64 machines - say, A and B - connected into a home network. Both machines have two interactive user accounts registered on them: Admin (member of Administrators) and Bob (member of Users). On both machines user names are exactly the same and account passwords are exactly the same.I don't use HomeGroup file sharing, all sharing is set up using accounts and passwords. Everything works fine with folder sharing.
Now I would like to share a printer. The printer is connected to machine A. I enable sharing for that device and give it share name HP. I also go to the printer security settings and enable everything for Administrators and Users.Now I go to machine B. First, I log in as Admin. I go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. At some point I have to enter the name of the printer, so I enter AHP. Without asking for any credentials Windows successfully connects to the remote printer, installs drivers, prints the test page etc. The remote printer appears in Devices and Printers. Everything works as it should.
Then I log out from Admin and log in as Bob on the very same machine B. The first thing that I notice is that for Bob the new printer does not exist in Devices and Printers. This is probably OK, since access to shared network resources depends on per-user credentials.
So, I attempt to "install" this printer for Bob as well. I repeat the same procedure from scratch. this time as Bob: go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. Again, at some point I have to enter the name of the printer, so I enter AHP. However, Windows suddenly asks me for credentials to connect to the printer. If I enter Bob's user name and password, Windows refuses connect to the printer, claiming that Bob does not have permission to access it. End of story.
Note that I can work around this problem: I can enter Admin's user name and password when installing the printer for Bob and ask Windows to remember these credentials. Everything will work fine after that, which means that Bob will access that printer as Admin.I don't want to give Bob credentials of Admin to access the network printer. I want Bob to access that printer under Bob's credentials. It works perfectly fine for file sharing. How come it doesn't work for printer sharing?
Anyways, I want to allow connection to only one WiFi, which is my WiFi. How do I do this?
This is to prevent users from connecting to their Hotspots and stealing my data.