After the windows 10 upgrade, usb ports are not working. System detects a device. I can see the device in device manager, but no icons are displayed in file explorer. I cannot open any of the external usb storage device or print from a printer connected via usb port.
View 3 RepliesAfter doing a clean installation i just realized that both my usb ports and my bluetooth aren't working. I have tried downloading software to download those drivers but yet still not is still not working. I have updated my laptop through windows updates but still both aren't working.
View 5 RepliesSince the upgrade to Windows 10, my main monitor, a DVI-Dual Link monitor, has stopped working after posting. I Have 2 other monitors, one DisplayPort, one HDMI, both working. I can use my dvi monitor, if it is the only monitor plugged in, to use the BIOS, but after Windows Loads, the display goes black, and "No Signal" is displayed. Also, It is not the monitor because I could use the HDMI with the monitor for it to work, but to get the 144hz I need to use dvi-D
I have tried:
-Uninstalling all Video Drivers
-Uninstalling CCC
-Reinstalling CCC
-Refreshing Windows
Specs:
FX-6300
CM 212 EVO
Gigabyte GA-970-UD3P mobo
A client brought his desktop into us with the following issue:A few months back he upgraded to Windows 10 without any issues. A few days ago his mouse and keyboard stopped working (both are USB). He brought the machine into us and I took a look at it. I found that, and I thought this would resolve it, he had a bad hard drive and cloned it. I installed the new hard drive and the PC booted back into window with no issues except that I still don't have any working USB ports. The PC only has USB Ports, no PS/2 Ports. No matter what USB port I plug a mouse or keyboard into it does not register. I suspect it could be a driver issue, but I can't access the PC at all to check. I want to try and avoid doing a backup and reinstall of windows if possible.
View 9 RepliesI tried to use a USB headset plugged into my keyboard's spare USB port. I found it didn't work and at first I thought it was an audio issue, but trying to connect my kindle via that port didn't work either. I then tried using the USB ports on my monitor and found neither device worked on those ports either.
The ports on the front and back of my computer tower are working fine, but no device is working or even being noticed by the computer when plugged into any 'hub' ports. This occurred without a restart from the time I was listening to a video via headphones via the keyboard port just an hour before the problem occurred, and I'm not aware of any driver or app changes in that time.
I've tried avast, malwarebytes, plenty of restarts, checking legacy USBs weren't somehow disabled in BIOS, updating every driver I can think of via Device Manager, manually and even with 'DriverEasy' for good measure. I tried each of those steps both before AND after a system restore rollback to Friday. I also tried CCleaner, and of course over twenty restarts at this point. Device Manager looks like this right now: [URL] ......
I can't get that alerted Multimedia Audio Controller to update despite reinstalling my audio card drivers and realtek several times each now, but audio isn't the problem, just a symptom as the speakers I run through my TV as a third monitor are working fine and so are the headphones when plugged into the tower. I don't think that's the problem.
I recently upgraded my PC case and for some reason whenever I plug in a USB device Windows doesn't seem to go with it. In device manager when I go onto the connected USB device properties it says "Windows has stopped this device because it has reported problems. (Code 43)". I'm currently running Windows 10.
View 1 RepliesBig gaming tower with ASUS MB, on-board sound, separate graphs card. I upgraded from Win7 to Win10 and everything went well for a day. Then my USB ports: 2's and 3's and my PS/2 ports too, went dead. Well, they have power but no communication. I figure I could reinstall an image of my Win7 and then roll back up to Win 10 but what is the matter is what I'm wondering.
I installed a fresh Win10 ISO on another drive in the box and that one works fine. The installation I rolled up to Win10 by invitation sticks on the Lock Screen and I can't enter anything at all. So, I can't get past the lock screen. All other USB devices have been disconnected except, at one point, a keyboard and then just a mouse, then just a keyboard on the PS/2. No joy. How to I can fix/hack/reinstall/etc the USB bus drivers? I think that would do it.
BTW, launching Safe Mode under my 7-to-10 conversion install makes the computer throw a "System Thread Exception Not Handled" error Wdf01000.sys Then it reboots automatically and I'm stuck back at the Lock Screen, well, unless I boot to the other Win10 OS on board, in which case I can boot to Safe Mode easily under that clean Win 10 install. That's just not getting me where I want to go. Might be time to just reinstall everything. Even the recent images I have are not what I really want. Win 10 was working so well for me on a Dell laptop I've been using since February.
I have an ASUS laptop X751L.
Yesterday the USB ports and wifi stopped working within a couple hours of each other.
When plugging in a USB device the laptop makes an audible signal that it picks it up but nothing happens after that.
I have Windows 10 installed on it.
I'm on build 10130, can't find RTM build through WU. Can't update from media creation tool's upgrade now function. Can't update from ISO because it says product key is invalid even though i used the command prompt to find original product key.
View 1 RepliesI am trying to install a generic text printer onto a windows 10 tablet but when the printer is paired through Bluetooth the Com port it is using is way beyond the normal Com port numbers.
After the printer is paired I would normally add a local/networked printer and select the same port as the Bluetooth device, when this is in the range 1-4 that is fine, but (due to repeated attempts) it is now up at Com19
I have looked online and found articles for Windows7 talking about uninstalling the un-used Com ports (that windows thinks are being used) but I'm not sure how to reach the same areas in Windows 10
I have so far tried the following:
1. turning it off and on again
2. using device manager, view ports, under the view menu setting 'Show hidden devices' but I can only see the two latest ports (19/20)
3. I have looked at the properties of port 19 and tried to change the port number, but this is where it says all ports from 1-18 are in use.
4. I have tried to follow win7 instructions that directed my to advanced system properties and the environmental variables/system variables - this section I can't find in windows 10 ....
The only other option seems to be hacking the registry, which I will now look at....
I fixed some issues on my of and now when the pc is off the USB ports remain on. Is there anyway where I can turn them off without ungplugging them ex: I have some USB lights for my pc and they are always on now same for my mouse lights.
View 1 RepliesI am having a weird issue with Windows 10 on my custom built machine. I have Windows 10 Pro version 1511. I just today started having this issue. I am assuming it was after the latest update because I had no issues on the initial bootup.
I fired up the pc, logged on like normal, and nothing out of the ordinary happened. Windows tells me it has an update installed and needs to reboot. Not doing anything important, I decided to reboot and get it out of the way.
Well, upon rebooting, it goes to my locked screen like normal. I click on my mouse to bring up my pin screen to unlock the pc, and the mouse won't work. I look at the bottom of it, and the optical light isn't even lit. Keyboard's number lock light is on, but nothing on the keyboard responds either. I turn on a USB audio interface I have, and it shows that it won't connected to the pc like it should either. It is like all the USB ports are dead.
Not knowing what to do, I hit the old reset button, and boot into my BIOS. Mouse and Keyboard work fine without any issues in the bios pages. Load back into windows, and I notice that the mouse's optical light is on, UNTIL it loads windows up. It then goes dead.
I tried taking a PS2 to USB adapter to the PS2 port, and that didn't work either. Eventually, after I leave it sit on the login screen long enough, the USB ports become active and I can finally log in and use it like normal. But it takes literally 5 to 10 minuets. I check device manager and it does not appear that any USB drivers where updated or changed.
So far, I have rebooted twice and the problem happened at both boot ups, but eventually the USB ports kick on and let me log in. After I log in everything seems to be working fine.
So I was messing with the services startup parameters and I managed to change something which is now preventing my USB ports from working. My kb/mouse lights up during boot and then goes off and stays off just before the login screen appears. How I could fix this without reinstalling windows again? I've tried all ports but none of them work .
View 1 RepliesI have upgraded my OS to Windows 10 from 7 and I can not see the PORTS(COM and LTE) in the device manager. I tried everything but don't know how to find it.
View 5 RepliesI am being bugged by a problem associated with USB ports apparently being intermittently disabled or disconnected.
The result is a cacophony of device disconnected sounds being played. It ultimately means the PC has to be shutdown. Occasionally a device connected sound will be heard as well.
I have heard that Win 10 is disabling or disconnecting USB ports to save power for tablets and such. Understandable for limited power availability but for PCs where power is always available this seems misguided.
I need to know if this is by design or can it be selected off via registry option.
I installed W10 yesterday and now the USB ports on the right side of my laptop no longer recognize anything. I don't even get the message that the laptop knows something is plugged in. There is a USB port on the left side of the machine that is working fine, but the ones on the right are ignoring me completely.
View 5 RepliesI just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
I had recently clean installed Windows 10 on my laptop. Before doing that, all my drivers were working well except for WiFi - a problem since build 10158. Currently I am on build 10240.
When I plug usb sticks into the USB 3.0 ports on my laptop, they don't connect. It's not like the 'not recognised' problem. It simply shows no sign of connection like blinking its LED or any response from the OS. On the other hand, when I connect my Lumia phone in the same ports, it warns me of Slow Charging.
And when I plug it into the 2.0 port, it gets connected. Why is this happening? All of my device drivers are up to date. I believe its not a hardware issue because my laptop has two such ports and both of them have the same problem.
I upgraded from W8 to W10. I have Acer V17. For few weeks, everything seemed to be ok... And then, one week ago, I restarted my computer, and I think I saw some actualisation being installed (I thought I turned them off, but I probably did not...). Since that moment I dont have WIFI. And I mean no WIFI at all - my network center says, there are no WIFI networks to connect to.
But that is not true, because on my phone and other devices, there are WIFI networks. I tried to google the answer and tried few things, but nothing works. In Device manager, my WIFI adapter (Qualcom Atheros) ha yesllow exclamation mark, but when i try to update the drivers, it says, they are up to date... but the exclamation mark is still there, an I have no connection. I am completely hopeless, because I need WIFI for my job. I really hate the moment I decided to upgrade this system.
I just wiped my computer and i installed windows 8.1. The internet was working all fine until i upgraded to windows 10. Now it says that "internet protocols are missing on this computer". I know for a fact this has to do with software brcasue my betwork adapter was completely fine until a windows 10 upgrade. How do i fix this. I uninstalled the adapter and restarted and still nothing. Sometimes my internet will start up again and then it will magically turn off again.
View 1 RepliesI have 8 NAS drives on my network that is attached to my computer. Prior to upgrade to Windows 10 - from Windows 7 , I could go to file explorer and then search all the NAS drives for the info that I needed.
In Windows 10, I can see on the NAS drives under This PC but when I try to do a search, File Explorer will say working on it and it will never complete - it stops responding. Windows 10 is the latest version(november 2015).
I seem to be having issues with my webcams. Every time I plug one into a USB port I receive a "USB Device Not Recognized" notice. I have uninstalled and installed the driver many times and restarted the computer. I have also tried an older LifeCam VX1000 with the same results.
View 1 RepliesI have just upgrade from windows 8.1 to windows 10. I have got a problem with my laptop the touchpad has stop working, how to get the touchpad working again?? I can get as it worked before I upgrade to windows 10.
View 2 RepliesI followed all the direction but all my screen says is working on it for the windows 10 upgrade.
View 4 RepliesMy father upgraded his Acer Aspire laptop to Windows 10 last week and now his login password is not working. I don't know if he had to put in a password to do the upgrade or if he miss-typed it. How to reset it or find the one he needs?
View 11 RepliesI had added 4GB ram to my acer 5742 laptop and now it has 6gb of ram. When I added ram windows 8.1 was installed. After than when ever I boot my laptop it just keeps restarting until I boot from HDD. When I was installing windows 10 from ISO file making USB bootable it just keep restarting every time I boot from USB and when switched off the new ram it start booting from USB and installed windows 10 now when I put back its new ram of 4gb it don't boot even from the hard drive.
View 1 Replies