Unable To Amend Or Type In Existing PDF Files
Jan 21, 2016I have downloaded windows 10 and since then have been unable to amend or type in existing PDF files.
View 5 RepliesI have downloaded windows 10 and since then have been unable to amend or type in existing PDF files.
View 5 RepliesOS: Windows 10 Pro 64-Bit (Upgraded from 7 Pro)
CPU: Intel i7-3820 CPU @3.60GHz, 32GB DRAM
MB: ASUS P9 X79 Pro L2011 socket
HD: Seagate Barracuda 3TB
PSU: 1200W Cooler Master Gold with X6 Fan in HAF X case
GC: AMD Radeon HD 6870 Graphics
LG DM2352D IPS TV HDMI Monitor
Bose Companion 5 External Speakers
Use: Mainly Office 2010, movies, photos and some CAD (no games or over-clocking!)
This is my hi-spec tower I had built for me in 2013 and I've had no end of trouble with it: Blue tooth not working, some USB2 and 3 sockets disconnecting and re-connecting erratically every few seconds, same with the HDMI monitor that does not integrate well with Windows, boot interrupts by Asus' POST saying the CPU Fan is not working which it is, WD My Book external drives seen in W7 but not in W10 and now, Adobe Acrobat DC Pro crashing after about 10 seconds of use.
Most of these issues still remain to the same or lesser degree: ASUS' after sales service and 3 year warranty is useless but Adobe went through the full test procedures and concluded that I needed a "clean" re-install of Windows 10. I am almost paranoid about keeping everything up to date, especially drivers and I am suspicious of generic drivers unless the hardware manufacturer says its OK like with the DVD optical drive for example.
From Windows 7 Update, the 10 Upgrade was seamless some months ago. But after clicking reset (keep my files option in Settings), and the process ran to the Welcome date page of rocks on the beach in shadow, Windows 10 will not proceed to the login page. Usually I just hit the spacebar but nothing. I have tried re-booting and re-setting but the same. Sometimes the MS plugged-in keyboard is active sometimes not. The MS plugged-in mouse is never active. Sometimes also the WiFi is connected but sometimes not. I have also tried ctrl-alt-del when the keyboard is working but also nothing. No I don't have a boot-up disc - I never needed one all through MS-DOS, 95, XP and W7!
There's nothing wrong with Adobe Acrobat DC Pro: I downloaded the allowable 2nd installation to my new DELL Inspiron 17 laptop on W10 Home and it runs like a train. But on my hi-spec desktop, it crashes after about 10 seconds and Adobe have thoroughly tested it all.
So what do I do to get to the login page?
I've recently installed Windows 10 and since today I'm having this issue when I edit an existing Word document and try to save it.
The error:
"Word cannot complete the save due to a file permission error.(C:User...Ongoing NotesInfoSoft.docx)"
I've noticed that there is a new user account that I didn't have before, which is an account associated to my Gmail. However, I've checked which account I logged in before opening the Word document, modifying and trying to save it - and it is an account with theoretically full control.how to fix it?
I've just upgraded my laptop to Win10 (did my desktop several months ago). The laptop is unable to take input to the Search the web and Windows task bar. I've searched the web, but all I've found was references to killing and restarting Search from the task manager, but there is no Search running. Also any time I try to start Cortana, I can see it start in Task Manager, but it then disappears. So the short of it is can't start Cortana and there is no Search running to restart. How do I get this feature to work?
View 9 RepliesI'm unable to type all special characters that require the Alt key to be pressed. €, ², ³, μ, and most importantly, @, are no longer possible with a German keyboard layout. I tried German German and Austrian German, and both failed to produce those signs. Normally, the @ sign is produced by pressing Alt+q, but since upgrading to Windows 10, nothing happens when I press Alt+q (or any other combination of Alt+letter).
Only German keyboard layouts seem to be affected, as I'm able to use Alt+letter combinations in other languages; just not in German.
I have an Acer Aspire V5-573G, recently upgraded to Windows 10 a few weeks ago. Was using my laptop this morning just fine but tonight when I turned it on, I get to the password log in and I can't type in my password.
I can still move the cursor around the screen and go back to the screen displaying the time/date before the password log in screen. I just can't type in my password! Nothing happens.
Also the little icons in the bottom right corner are dull, the clock symbol and the power symbol, although the wifi symbol is highlighted as it's connected. I've unplugged all external hard drives and even turned off my wifi.
Not being able to slide to type in the browser address bar is my pet peeve with W10M, considering I use Edge quite frequently. The address bar is used for search and it only makes sense to do so!
View 4 RepliesI use Calibre to manage my .epub files, and these files are located in folders within folders within folders. My questions is whether I can use Windows Explorer to see all of the .epub files located located in my Calibre Library (which is the folder which contains all of the other folders/files) without having to go into each individual folder and copy the individual files out.
View 1 RepliesI would like to edit the file type descriptions of a number of file types on my computer. I mean the text that is written in the "File Type" column. For example, after installing Opera browser, all HTML and HTM files have the "File Type" of "Opera Web Document", but I would like to change the File Type for HTML files to "HTML file" and for HTM files to "HTM file".
In Windows 7 I used a utility called Default Programs Editor, but that utility doesn't quite work on Windows 10 anymore. I have some file types here that do not show up in the list of registered file types, which I want to change. For example, I have WSXZ files which are opened by a program called SDL, and the "File Type" according to Windows 10 is "SDL WSXZ Document", but I would like to change that to "WSXZ Forward Package File".
How can I do this? Is there an easy way to do it?
As a keen flickr member I have a lot of photographs on my computer. These are all neatly allocated to different files, depending upon a variety of variables. So far....all is well.
Yesterday my neighbour kindly upgraded me to Windows 10. Everything seemed fine.
Today I tried to take 4 photographs off my camera and load them up to my computer. Initially I got a dialogue box asking me what I would like to do in future when I plugged in my camera - I said "upload the pix to my computer".
Previously they have always arrived on my desktop in a separate file. I would then edit them, afterwards splitting them up into different files, depending on what I want to do with them.
Anyway, this morning, after taken 4 photographs, I plugged in my camera. I then get a message saying "We found 880 photos. Would you like to import them into your picture folder". And the only alternatives given were IMPORT or CANCEL.
I do NOT want all my pix jumbled together in a picture folder. I want them all neatly organized into the folders I have set up.
Is there any way I can get rid of this 'Picture folder' and go back to using my existing folders (they are all still there, and all still containing the photographs they should rightfully contain.)
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
View 1 RepliesI am aware that windows 10 (I am used to Windows 7) will not negatively play MPG files. I know this is a side effect of the codec being ripped out to prevent DVD playback via Media Player. The annoying thing is I have quite a few family MPG files mainly from our ageing Sony Camcorder on my system. Luckily I have Cyberlink Media Show pre installed that can play the files within it's own software and the media suite (espresso) can convert said files to other formats.
However, converting takes time and it is frustrating that media player 12 won't do the job and Windows Explorer won't display these MPG files with the handy thumbnail within file explorer viewing. Given that I am a little distrustful of codec packs and all my other files such as MP4, WMV etc etc play well I am looking for a solution that maybe just allows windows explorer to display the thumbnails and as an added bonus Media Player can once again play them. It does seem draconian that MS stifled a common playback format such as MPG in the last 2 windows and a major backwards step. I know I could download something like VLC or Media Player Classic but it seems pointless seeing as I have software that can already play them.
I tried K Lite Codec Pack a while back but hated the effect it had that I uninstalled. It was causing thumbnails to constantly refresh everytime I opened a folder. So is there a way of slipping in a single codec only related to MPG files without risk of unsettling all the other stuff that works well? Many of the codec packs seem to have the unpleasant side effect of slipping in extra installations and seem very dodgy and capable of causing grief.
Having trouble with my computer put in a sd card and an error said directory not vaild so after some looking online it said to run sfc so did that but it did not fix some errors. Upgraded from Win7 my computer is custom built...
View 12 RepliesA friend gave me some medical reference materials before I left on a volunteer position in Trinidad and Tobago, but most are in pdb format. I can open the MSWord and pdf files but unable to read the pdf files.
View 1 RepliesI went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 RepliesI cannot seem to delete files when I'm doing a regular search in windows. I can go to any folder and delete files, but I when I see the same files in a search result, pressing del does nothing and when I right click, I have no option to delete them like I do when I'm just viewing a folder. Am I missing something completely obvious here? Is this really a feature or a bug or what?
View 4 Repliessince installing Windows 10, I can not save updates to word files or anything to a folder. I've read I should change the user settings that default to 'read-only' in the system folder. I've done this 3 times. The fix doesn't work.
View 1 RepliesUnable to access music files after upgrade to windows 10
View 8 RepliesI ran sfc /scannow in an admin command prompt, however when it completes I receive this message:
"Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For
example C:WindowsLogsCBSCBS.log. Note that logging is currently not
supported in offline servicing scenarios."
I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.
Since upgrading to Windows 10, I have been unable to burn iso files to disk, sometimes I get an error message, saying this could be due to disk utility burn speed. Most of the time just a message, an error occurred.With this same computer, I never had a problem with Windows 8, I also have Linux Mint, dual-booted on this laptop, and it will burn images to disk.Is there some way to tweak the disk burn utility?
View 9 RepliesI've newly installed W10 Pro and am constantly being pestered with permission nags (see attached) while attempting to reorganise files within the Local Disk.
I've tried changing the User permissions via "Properties>Security" but encounter nothing but a load of error messages.
I upgraded from Windows 7, bypassing 8 entirely so I've never had to tackle this issue before. I'd like full access without annoying UAC-related notifications every two minutes!
My pc is about one year old and I was running Windows 7. Since updating to Windows 10 I am being denied access to some of my files. When trying to access some of my Word files I get the following message " looks like you don't have permission to view this file. Check permissions and try again". Another message I get when trying to access some other files is " user does not have access privileges ". I am the sole user of the PC and always have been. I have tried to solve this but have not been successful.
View 1 RepliesI am unable to download *.xap files from store as Microsoft has changed the store layout. Previously. Before the Launch of Windows-phone 10, it worked for me.
View 1 RepliesI connected the printer to my computer and I'm able to print pages from a browser, my problem is I'm unable to access the printer directly to scan files. I've tried deleting and re installing that didn't work. The printer is an HP Deskjet 3050 ...
View 3 RepliesAs with many I have upgraded to Windows 10 today and it is going well except for the fact I am unable to save any files or create new ones in the Documents and Pictures folders or any sub-folders within these folders. For instance, I tried to save an image created in paint and attempted to save it in the Pictures folder, it gave me the error message seen in this picture below:
Note, I am the only user on the system, and also the admin account so I do not know why it says this. Clicking Yes on the box does nothing and the same thing still occurs afterward. In addition, bringing up the right click menu and going to new only allows me to create a new folder, and the windows admin shield icon appears next to it. Deleting files also prompts me to ask for admin permission but in that case I can simply click the continue button and it goes through.
Since receiving a windows 10 update I have been unable to download excel and word documents sent in emails. Also all PDF files have been changed to Microsoft Edge ??
View 1 Replies