After the latest update yesterday of win10, I was able to connect to the internet. But once my laptop was shut down, I've been unable to connect since. Rebooted wireless remote and double checked all of the connections. Defender took over as my firewall from Advast. I've been able to shut off Defender but am still unable to connect to the net. In my wanderings, I did come across "report" that information was being sent but nothing going past some unknown firewall. As far as I know there are only 2; defender and Advast.
I recently did a reset on my Windows 10 laptop and it reset to version 10240. I am not being prompted to update to the latest version via Windows Update. How do I trigger the update to send TH2?
I have a Similar problem in which I cannot install the latest windows 10 update I get to 75 percent and then it says it can’t continue and resets.
My computer is a Windows 7 machine upgraded to Windows 10.
I have ran sacs scan and it found corrupt files. Done all the other scans that you have suggested and I did get that source/image is repairable.
Tried all the Command prompts DIM/Online and that would not work either.
Using Microsoft media creation I re download windows 10 Is Mounted it do a dad and pointed the DIM online source to F: it also says that source fills could not be found.
I have even tried to reset Windows 10 but that encounters problems as well
I have even tried to reset windows through ISO and that encounters problems as well.
I downloaded Windows 10, uninstalled my anti virus and disabled my firewall. I am unable to connect to the internet (Ethernet) on Windows 10, I've check the IPv6 and IPv4 which are both activated. I may need the drivers but I'm unsure how to do it.
My other issue is I can't revert back to Windows 7. Apparently my PC deleted the Windows 7 files downloading Windows 10. I tried using the windows disc to format my ssd to clean download Windows 7 back onto my computer, but it wouldn't let me for some reason.
So if there is an easy fix for the internet issue, ill keep Windows 10. But if it's going to take me all day of troubleshooting I'd much rather format my computer back to windows 7.
GTX 970, i5-4460, 8GBs of ram, Sabertooth z87, 650w PSU
The internet functionality works fine on his PC after upgrading from Win 8 to Win 10, though there is one problem that we cannot seem to figure out. Whenever the computer is restarted, it somehow cannot connect to the internet. This is especially weird because it will connect after being booted up from a full shutdown.
I should also mention that this is connected via Ethernet cable, not WiFi.
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
I'm running Windows 10 (upgraded from 7 a month or so ago) on an HP Pavilion g6 laptop. My computer suddenly stopped being able to connect to the internet a few hrs ago and now no website opens in any browser. Torrents work fine, surprisingly.
Troubleshooting gives me this "Your computer appears to be correctly configured, but the device or resource is not responding" ... I tried the flushdns, registerdns, ... routine but it doesn't work. Switching the router off and on again didn't work either.
When I try to change the DNS manually in advanced adapter options, on selecting 'validate upon exit' and closing the window, I get this message "Unexpected condition occurred. Not all of the changes could be made".
Upon googling I noticed on some forums people were pointing fingers at Virtualbox Bridged Networking Driver and VMWare Bridge Protocol. I can see these in the Properties window, but upon trying to uninstall these, I get another error 0x8007007E
I have uninstalled VMware, but the damn protocol is still there. I'm not sure if that is really what is preventing me from making changes to the Network's properties like DNS and IP ...
I have a VAIO F Series VPCF217HG that I just upgraded to Windows 10 a few days ago. So far everything worked fine except one problem.
I have a perfect internet collection, as in I am still able to go on to websites and download/upload stuffs, but every time I try to use any of the Microsoft features, it keeps saying that I don;t have an internet connection. I cannot use Cortana or Windows update and a lot of other features. I tried to use the ""Use SSL 2.0""Use SSL 3.0""Use TSL 1.0""Use TSL 1.1""Use TSL 1.2"" fix but it did't work.
I thought it was because of my outdated Mcafee, so I uninstalled it but the problem still persists afterwards.
After installing the early January updates, I can no longer mount/linkto/attach my two NAS drives. They are connected through the same switch that my PC is on. I have updated the NAS firmware with reboot, and restarted the switch.
The Advanced Sharing Settings are set to "ON".
NB the volumes are mountable from my Mac under Yosemite.
I'm in a lurch on 10162. I haven't received an email to update to 66, and windows is telling I'm up to date. My friend got 10166 installed, and he's having an issue with resolutions, so I'm trying to install now.
The latest update changed a lot of my settings, like my mouse sensitivity, along with resetting my background to its default image and resetting my task bar to default. My biggest issue is that it deleted all my pictures in the "Pictures" folder. if they put them in the cloud? Or am I just fucked and have to go down to the head developers house and chuck eggs at it.
So after having numerous issues with my ASUS VivoTab Smart upgrading to Windows 10 (Sound issues, display driver issues, losing my Recovery Drive, etc) I finally got everything fixed and my tablet was finally running as wonderfully as it did on Windows 8.1..... For about a week.
And then this latest build for W10 comes out. I downloaded it and then attempted to install it
The system restarts to do the update with the circular progress bar but then gets stuck at 40%. I have had this problem on three different PC's in the past and all I did was power them off, boot up again, and then it would finish off the update with no further issues.
But that didn't happen this time. I powered off my Tablet and then started it up again. Instead of carrying on, W10 decides to cancel the whole update and roll me back to am earlier version of W10.
I thought I would try again and this time wait longer. Maybe I was impatient. Went through the process again, rebooted, started the update install and then stuck at 40% yet again. I figured I would just plug my tablet in and leave it while I slept surly it would finish by the time I woke up. Nope it was still at 40%
Powered it down because I couldn't do anything else, but it decided to roll back again. What's worse is that it seemed to have rolled back to a version of W10 prior to when I got everything fixed mentioned above. So now not only am I stuck with a dud upgrade that keeps trying to install after a period of time, but I have to fix all my previous issues again. How to resolve this update freeze?
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
OK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
after applying the latest cumulative updates IE11 is now broken on my system (W10 pro X-64)..Often the Main (home page) of a site works but as soon as you link to other links in the site garbled text often appears.Here's an example from BBC website. Main news page opens but link to a story and One can partly fix by pressing F12 and setting IE compatibility to IE10 or IE9.
My laptop did an automatic Windows 10 update Friday and restarted but no program will open now and I have to hold the on key to restart it. I get about 15-30 second after it comes up to click on something and it might open but will stop responding shortly after. I have got task manger to open once and only AVG was running but it frozen before I could click on anything.
I started in safe mode and removed the last window updates only to had them reinstall when it restarted.
What at can I do? Is this a virus or malware or did the latest update do this?
Updated to the latest 10 update last night and Edge is almost unuseable. Takes about 5-10 minutes for the computer (esp Edge) to unfreeze and start playing nice.
Exactly as it says on the title. When I power it on, the GPU fans go full blast, it stays that way for a little while and shuts down automatically. There's no splash screens or anything either so I can't go into safe mode. Sometimes it shuts down almost immediately and then starts up again by itself. Sometimes it seems to start fine, the fans spin at their usual speed, but nothing appears on the monitor and eventually it just shuts down again, it's not properly booting up though because my drawing tablet's lights don't go on when I plug it in.
All this after the latest update. I restarted the thing so it would install the updates, but it got stuck on "Restarting" screen with the dot things spinning. I left it for several hours until I forced the shutdown and it has done this stuff since. I do recall the task manager not starting up from the security screen though.
What I've attempted so far: Taken the battery and power cable off and held the power button for atleast 2 minutes. Taken the second graphics card off. And reset the battery again. Left it overnight like that to see if it would actually do anything (As if). Started it up without the battery. Tried to get into safe mode, nope.
Ever since I installed the latest "service pack" of Windows 10, my start menu doesn't work and my battery doesn't charge. I've found work around for the start menu creating links on my desktop to my personal start menu and the all users start menu. For now, I just need to leave my computer plugged in. I've fixed the plugged in not charging in the past. But in the past, I've always had a laptop that has a removable battery. This laptop doesn't. But since all this is due to the major upgrade of 10, seems like there has to be a simple or common fix.
Issue: Track Pad Fingers 2 fingers Scrolling issue after latest Win 10 Update. Just after a Win 10 update for 'Asus Smart Gesture', the two finger scrolling is not working any more.
Troubleshooting steps: Uninstalled Restarted the system Fresh Installed latest version Asus Smart Gesture, but no go. Still exact same issue as above.
Expectation: I am expecting to be able to have the two fingers scrolling running as before. More so that it was working and now not since last update from Windows 10 for Smart Gesture Asus. Not having the two fingers scrolling is really tough.