I am having an issue right now that my computer won't shutdown the leds and fan still keep running after the screen has turned black. I need to hold the power button in order to shutdown my computer.
I recently installed an SDD and since then I am having the issue.
I have 7 or 8 computers around the house, most dual boot Windows 10 pro x64 and Linux. When you shutdown a Windows machine and start a Linux machine there are errors and Linux won't boot (The HDD's weren't shutdown properly ~ the OS's have there own SSD's && share a data drive, this is the drive that registers the error). You have to boot windows and shutdown from a cmd 'shutdown.exe /s /t 0' or similar. Is there a way to set windows to actually shutdown with the standard gui shutdown routine?
After the Windows 10 upgrade my laptop cant shutdown fully. When i try to turn off my PC, everything goes well at the beginning, almost everything goes off. The things that remain on looks like to be only the fans and the LED of the power button. I dont know what to do.
After I upgrade my windows 8.1 to windows 10 2 months ago. I found out that my computer not shutdown completely, Every time I press shutdown the computer shutdown but the cooling fan is still running and not stop, I need to force shutdown every time by pressing the power button around 10 sec.
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
I am in a similar situation. Upgraded a self build PC from Windows 7 to 10. Now, I am unable to shutdown. I have turned off the Fast Startup, but it still reboots when I hit 'Shutdown'
Ever since installing Windows 10 (clean) I'm facing several network related issues. Before going in depth I'd like to figure out if it's a problem with my PC or if it's a problem with Windows 10 in general.
I'll just stick to one problem for now.I have a Synology NAS and connected a directory there as network drive. I have some programs there that won't work when run from this location.
GameSave Manager/HandBrake Setup/Notepad++ Setup
"The Application was unable to start correctly (0xc0000142). Click OK to close the application."
WinMergeProtable Process shows up in Process Explorer but closes immediately.
Audacity Portable/WinDirStat Portable (and probably more programs using the PortableApps.com Launcher)
"X:ProgramsWinDirStatPortableAppAppInfoLauncherWinDirStat Portable.ini is missing [Launch]:ProgramExecutable - what am I to launch?"
AIDA64 Program works but no icons appear.
There are more but I think those few suffice for now.
All of those programs work fine once I copy them to a local drive and run them from there. Windows 7 ran the very same programs from a network drive without any problems.
I won't even touch the fun stuff like how playing a video from my NAS causes downloads (to the NAS) to stop because of access errors.
Recently I have had a repeating issue with the (egg) timer running constantly. I have been unable to stop it or to close the current program or web page which appears to be involved. What is happening? I thought it might be due to RAM running too low but that does not seem to be the case --- I can keep a constant check on RAM and use utilities to free it up at will. So if not RAM, what is it and what can i do about it?
Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Then when I restart the system warns me that the last shutdown did not work properly and it gives me a choice to troubleshoot or restart. When I choose restart everything seems to load as normal.
I have a problem with pop up dialog boxes on Windows 10 not displaying the content fully. Its rather frustrating as I can not see most of the text or the buttons to click on. I have changed my resolutions to different ones and also display size but the problem still persists. It only seems to do this with pop up dialog boxes, such as software installation boxes. My display is a 48" Samsung 4K TV rung HDMI from a Nvidia GTX 980Ti GPU.
My laptop has a battery light which tells me when my laptop is fully charged. When it is fully charged (it is green), Windows still says "05 minutes until fully charged" and then charges for another half hour. In the past the light has been reliable, so I believe that windows 10 is the issue. My laptop has also had significant issues with charging. I can confirm this with two batteries. I have an Asus K55VD which I haven't changed the battery plugs in or anything like that. What could my problem be? Here's what I've tried:
-Disabling and re-enabling Microsoft ACPI-Compliant Control Method Battery (no change) -Turning power saving off in BIOS (did a bit with the charging problem) -Fixing the fan (turns out it wasn't spinning, which caused a range of issues. Worked for battery charge issue a bit) -Keeping the laptop shut down (didn't work) -Keeping it asleep (didn't work) -Keeping it on with the screen off (did work it charge)
Yet I can't find a fix for the battery charging percentage and time issue.
I have two computers my laptop has updated to windows 10 with the automatic upgrade with no problems.
But my PC will not start the upgrade I was told to look in the temp folder $Windows.~BT.
The size of this folder was 5.88 GB. And had been like that for a couple of days.
After reading on [URL] .... It said that the upgrade might be corrupt I followed the advice and went to (Windows/ Software Distribution/ Download) and deleted everything in that folder. Then I ran the command prompt as an administrator. Type in "wuauclt.exe /updatenow".en as advised on the website.
Almost straight away the windows upgrade started again but it has gone back to the 5.88 Gb and stopped again
Looking at windows update and view update history I see there are 6 failed attempts to upgrade to windows 10 all with Error details code 80240020....
I have a strange problem in my laptop. Yesterday I charged my laptop to 100% in the night and when I woke up in the morning the laptop was showing red light indicating the low battery. I wonder how the battery drained so quickly overnight while the laptop is shut down?! And this is not the first time its happening, I am facing this problem after I upgraded to Windows 10.
I followed Brink's tutorial here: Shut Down Computer in Windows 10 And I saw that there are 2 ways to fully shutdown Windows through cmd: /s and /p. What is the difference between these 2, if both of them are said to perform a full shutdown?
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
This is something that recently just started happening. I click on the start button and click Shutdown and everything seems to go normally and the monitor goes black but the computer will not shutdown. The activity light continues to flash and after a few mins my PC just boots back up, almost like it was doing a reboot.
when I shutdown win 10 it goes through the shutdown process the screen goes off but the PC keeps running for 3 to 5 minutes it didn't do this before it has just started in the last week.
Upgraded from Win 7 which ran as normal. But now under Win 10 Pro, both "Restart" and "Shutdown" produce a restart.I have reflashed to the last BIOS just in case but to no avail.
I have installed W10 twice using the update feature. Everything work fine except when I want to shutdown or put the machine to sleep by clicking on those options, the machine makes noise like the HD is working. It then just shuts down and reboots again. The only way I can shut it off is by using the button on the computer.
I set my screen to turn off after ten minutes but it doesn't shut off. Today I read somewhere that it could be because I have a USB hub plugged in. Sure enough I unplugged the Hub and my screen shuts down as I have set it up to do. I need what is plugged into my hub and it is a real hassle to reboot my machine when I plug the Hub back in. I have also noticed one more thing and that is that programs that run in the back ground for instance Seti @ Home slows way down since the screen stays on.
I've installed Windows 10 just fine, with the latest Nvidia Win 10 driver, however when I reboot my system nothing works, not the start menu, not the apps, they do nothing, can't shut down except for a hard shutdown, after the hard shutdown the start menu and apps work fine until the next shutdown,
I set up a "shutdown" shortcut on my desktop that calls "shutdown.exe" and almost every time after I click on the shortcut I see a message dialog box that saying explorer is not responding and it takes a while for that dialog box to close and then finish shutting off the computer.
I've noticed this also happens when using the start menu->power->shutdown.
Is there a way to shutdown windows 10 without installing updates? I know previous versions of Windows had command line or registry tricks that worked with this. Note the version of Windows 10 I am using is the normal version you get with the free upgrade.