So I have my computer connected to my laptop via Ethernet cable this is how I get Internet access to my pc usually it shows my network name and that I am connected to the Internet. just this morning I upgraded my pc from 8.1 to 10 and ever since my network says unidentified and limited access I updated and installed all the drivers for my motherboard including lan I also tried manually putting tcp/ip and it still did not solve my problem so I switched it back to automatic but no luck .
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
yesterday my Ethernet connection stopped working suddenly was using and any moment stopped working I have tried many things and I can not make it work, this is the model of the adapter (Intel (R) Ethernet Connection I218-LM) and this is the error in the diagnosis of Intel.
connection Status: Failed.This test Relies on a response from a gateway, DNS, DHCP, or WINS server and no such response was received. any such server connection for this May be unavailable or misconfigured.This adapter is configured to Obtain an IP address automatically but no DHCP server is present on the network.Windows selected an IP address using Alternate Private IP Addressing.
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
Every so often Windows 10 will give a notification about Limited Network Access on a wired Ethernet connection. The notification is not true as I am able to use non-Microsoft applications such as Firefox just fine with the Internet. However Microsoft applications such as Outlook, Windows Updates, Edge and IE do not detect an Internet connection and are unusable. I found that if I turn off real-time protection in Windows Defender and then reboot the computer it clears the error for a time but it always comes back within a day or two.
i've been with this problem for months and i have tried multiple solutions offered by others on the internet, yet i'll give it another try here.
i'm using a powerline adapter directly plugged into the wall on my desktop. And it has worked excellent before, but suddenly someday it did not get a valid IP adress anymore for my pc, i have tried giving it an ip adress manually but without succes. i also tried updating the driver but there was no update.
my network and sharing center displays unidentified network and windows problem solver detects the problem 'network name' does not have a valid ip configuration.
So yesterday my internet stopped working which is ethernet to d-link hardline ac adapter to router. Xbox is connected same way and it works perfect. Tried all the usual reset/restart stuff. Keep getting unidentified network no internet. My router reads my PC so i know its connected. Updated the ethernet controller drivers to win 10. No luck. My wireless adapter doesnt work either but i hooked it up and while it connects to my router and has a good signal it will work for a few mins and than drop out.
I upgraded my laptop from windows 7 to windows 10 with the free upgrade that came out a while back. I recently bought an Ethernet cord to enhance my gaming performance, but when I plug it in it says identifying for a little while then says unidentified network no Internet. My friend came over and tried it on his laptop and it worked for his Windows 8.1 . I have a Comcast router/modem combo and have it hooked to a western digital router which is what the Ethernet cord is run from.
Strange issue that just started today. My Ethernet adapter shows unidentified network and none of my apps have internet access, however my web browsers work just fine. I am even making this post from the adapter that supposedly has no access. I have been searching around for a solution, but no problem seems similar to mine. Check out the screenshot below.
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
I am using a D-Link DWA-160 Xtreme Dual Band USB Adapter into a NetGear Router. I have three Win 10 machines connected two of which are just fine. The third is displaying "Limited Access". After doing all the normal substitution things without effect I did a System Restore. I was immediately able to connect for about five minutes and then got "Limited Access" again. I undid the the System Restore and got the same result. Connected as soon as the roll back was completed but then went back to Limited Access.
So i was accessing the internet fine on my computer no more than an hour ago on the same network im on my laptop now with and then i restarted my computer and it give me limited access and i cannot connect to the internet. I reinstalled my wifi card driver and that didn't work. The Network and Internet troubleshooter said it was the driver and could not fix the problem itself.
I recently upgraded my laptop to Windows 10. Since then, I can not connect to Internet at all. The cable says no Internet when connected and wifi says limited access when connected. I am posting this through my phone because my laptop keeps saying limited access.
Today, when i opened my PC i found out that i have "No internet connection". The last time i used it was last night, and it worked like a charm. The problem is from the software itself I guess because other devices seem to be working fine connected to the internet. This also happened to me while using windows 8.1 but I got it fixed everytime with a simple "netsh" command. Now things aren't this simple, i tried multiple fixes and none of them worked. I tried to update the driver from the device manager but i can't find the microsoft and the producer driver, instead i find some outdated drives from like 2013.
Since downloading to Windows 10 I have had trouble connecting my computer to the Internet. I am on a college campus and having a computer with no internet is like a truck driver without a truck. I am able to connect to the Internet at random times for a few moments before it shows up with limited acces symbol on my wifi icon in the bottom right hand corner. My internet works fine when it is plugged in through an Ethernet cable but that is very inconvenient.
I have the latest version of Internet Explorer. After updating to Windows 10 my internet works perfectly in Safe Mode, but I have very limited internet access in normal boot up mode. How do I resolve this problem? (My computer is an HP Envy 700-210 desktop with 64 bit operating system)
My friends have problem after she upgrading to windows 10 from windows 8.1. Driver still enable but every time connect using wifi always have limited access and can't connect internet. She is also have try other wifi connection and all have limited access. There is also system batch error before, but now doesn't show again.
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro. Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD >C: >PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
After the latest Widows pro 10 update I am unable to access my home network drives. Both the Synology and Buffalo drives were accessible but now are not viewable from the desktop.
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
