Update Failing With Error Code 0x80070057
Aug 2, 2015Trying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 RepliesTrying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 RepliesI'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 RepliesMy backup is failing ( three times) with 0x80780065.
There are three backup sets
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2015-06-01 070022 98,038 Files, 536 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-01-21 181147 691 Files, 7 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-03-04 160552 376 Files, 5 Folders
I would like to delete all three backups and start over using the windows 7 backup and restore offered by win 10 backup. Is this a viable plan?
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
I get the error "Code 80200013" when I try to upgrade my windows 8.1 to windows 10 from my reserved upgrade through Windows Update.
Additionally when I try to create a usb installation media through the tool (this one here [URL] ....) I get the message "something happened".
After updated Windows 10 (PC) from build 10166 to build 10240. Then I can not download app in Windows Store. An error code is 0x803F7000 and '"try again latter".
View 1 RepliesTrying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?
View 1 RepliesI can't install or update any apps. Code error 0x803f7000 in all apps
Windows 10 came preinstalled on my Surface pro 4, i5, 8GB version...
So far i checked my clock, date and timezone - Correct
Location, region and language settings are all set to English (US) - Correct
I tried doing the store reset thing by launching command prompt (admin) and putting in wsreset - Didn't work.
I triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 RepliesEvery time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 RepliesThe update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 RepliesI have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
I pretty much gave up trying to install this thing after 3 days of trying. Keeps trying to install and fails.
View 2 RepliesThe upgrade to Windows 10 from Windows 7 x64 keeps failing. I get this error code: C1900204.
I have tried removing the folder and executing the command. Keep getting this error: C1900204.
I have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous version of Windows and I end up back at Windows 7.
I don't know if there's any logs somewhere I could check to try to figure out what the problem is.
Do I have any options for upgrading this laptop if the update from 7 to 10 won't work? From what I've read I need to get the in place update to work in order to get a valid Win 10 key so I might be screwed...?
Upgraded to W10 on Surface Pro3 and it seems Outlook 2013 SMTP emails failing to send. emails send OK on other devices and all OK via Outlook web.
When testing the setting in Outlook test email send OK but when going back into the email account email fails to send with following error:
Task 'email address' - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' Used different network connections with no success.
After I uninstalled catalyst control centre (because I was having problems with it). When I restarted my mouse and keyboard weren't working. So I tried a ps2 kb and mouse and this worked. I went to device manager a looked at the USB devices, all of them had a yellow warning sign next to the devices. I checked each one and they all had error 39 (missing or corrupted drivers). I tried updating and uninstalling the devices with no avail. How can I fix this?
View 1 RepliesI am trying to install the following update:
When I get the following error and errorcode:
Restarting is not working.
I upgraded to W10 a few weeks ago from W7. All went well.
Then 2 days ago i got the windows error code oxc000021a, and the computer wouldn't start. Couldn't get into safe mode, and repair didn't work either. Really annoying. I've had to reinstall windows 7. I can still see my windows 10 old install saved under windows.old.
I don't have any option yet to re-upgrade to W10, despite putting all the updates on W7 again. What can I do to get W10 again and recover my data from windows.old?
Whenever I try to install a new version of some software I get the following message: "movefile failed code 183".
View 6 RepliesEvery time i try to upgrade to windows 10 i get an error:
Upgrade to Windows 10 Home
Installation date: 8/8/2015 4:42 AM
Installation status: Failed
Error details: Code C1900101
Any fix that actually works so i don't have to try 100 things. The only thing to note is i have two drives, one is an ssd which is where my current windows is installed and its path is E, not C, just wondering if that may be the problem.
I tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
I've got 8 apps in the windows store in queue for the last three days. Every time I open store and click on check updates I get this error message as shown below..
Try that Again
Something went wrong
The error code is 0x80070005, in case you need it
Windows 10 store error code(0x80131509) when trying to open it
View 1 Replies