I'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 RepliesTrying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 RepliesMy backup is failing ( three times) with 0x80780065.
There are three backup sets
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2015-06-01 070022 98,038 Files, 536 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-01-21 181147 691 Files, 7 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-03-04 160552 376 Files, 5 Folders
I would like to delete all three backups and start over using the windows 7 backup and restore offered by win 10 backup. Is this a viable plan?
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
I get the error "Code 80200013" when I try to upgrade my windows 8.1 to windows 10 from my reserved upgrade through Windows Update.
Additionally when I try to create a usb installation media through the tool (this one here [URL] ....) I get the message "something happened".
The update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
I have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous version of Windows and I end up back at Windows 7.
I don't know if there's any logs somewhere I could check to try to figure out what the problem is.
Do I have any options for upgrading this laptop if the update from 7 to 10 won't work? From what I've read I need to get the in place update to work in order to get a valid Win 10 key so I might be screwed...?
After updated Windows 10 (PC) from build 10166 to build 10240. Then I can not download app in Windows Store. An error code is 0x803F7000 and '"try again latter".
View 1 RepliesTrying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?
View 1 RepliesI can't install or update any apps. Code error 0x803f7000 in all apps
Windows 10 came preinstalled on my Surface pro 4, i5, 8GB version...
So far i checked my clock, date and timezone - Correct
Location, region and language settings are all set to English (US) - Correct
I tried doing the store reset thing by launching command prompt (admin) and putting in wsreset - Didn't work.
I triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 RepliesEvery time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 RepliesI've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 RepliesI tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
I have never had a problem installing updates to Win 8.1 and all important updates are fully installed. Every time I try to update to Win10 it says "downloading Windows 10 - checking requirements" and then I get the above error message.
View 9 RepliesBasically I got this error message while upgrading to Win 10 from Windows 8.1 using the media creation tool.
What happened was, I did this first and i got to windows 10 no problem. Everything was fine until my internet died on the PC. Troubleshooting said there was a problem between the router and the connection. Long story short I could not get the internet up and running on my desktop only, everything else was fine and my other devices had no problem connecting to the Internet. The Internet worked about 4 hours into using Windows 10 then died on the PC only.
So I went back to Win 8.1. Everything seemed to go ok, everything worked. I tried to update to Windows 10 again Abd got this during the install...
When I try to upgrade Windows 8.1 with Bing tablet to Windows 10 in Windows update i get Error Code 8007003 in preparing to install phase.
When choosing try again it re downloads everything and same error appears.
I tried cleaning Windows Update files and running troubleshooter but it doesn't work.
If I try to upgrade from windows 10 home ISO will my activation be fine.
How do I resolve error code 1335 ? App downloads and MS updates will not down load. "cabinet file package error" PCW_CAB_RDR
My OS is Win 10 original install, not upgrade, from HP. CPU tower not laptop. Continuing problem.
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesA friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
View 1 RepliesI have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 RepliesI pretty much gave up trying to install this thing after 3 days of trying. Keeps trying to install and fails.
View 2 RepliesThe upgrade to Windows 10 from Windows 7 x64 keeps failing. I get this error code: C1900204.
I have tried removing the folder and executing the command. Keep getting this error: C1900204.