Updates :: 10586 Fails With Error 0x1900101-0x30018?
Nov 13, 2015
I attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 Replies
Similar Messages:
Sep 1, 2015
I guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
View 9 Replies
Aug 14, 2015
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
View 1 Replies
Aug 15, 2015
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 Replies
Nov 12, 2015
I have 2 desktops and 1 laptop. Both desktop update fine to build 10586 but the laptop keep saying up to date after check. Even try Lan connection still no go for laptop to update. How to force laptop to update? All running Windows 10 Pro.
View 7 Replies
Feb 10, 2016
Since the Win10 Upgrade fails on my HP DV6 notebook, I decided to do a clean install.
But now, it won't take the Win7 product key for activation!!
I called MS and they told me that a clean-install will NOT activate using Win7 product keys and that I have to purchase a product key.
I got this same story from two different MS reps.
I thought you COULD activate a clean-install using Win7 key using build 10586.
View 9 Replies
Nov 21, 2015
My motherboard died, and I had to get a new one. I bought the same model. The rest of hardware on my PC remained the same. After that upgrade my Windows 10 isn't activated any more.
I don't have Windows 7, 8, 8.1, or 10 licence, but I am early Windows 10 Insider, and I recieved free Insider builds. They had expiration date, so I had to keep ugrading to new builds, and stay in the Insider program to retain my free "licence". I was doing so, and I provided feedback to Microsoft about every build.
I was hoping that "minor" hardware change wouldn't affect my Windows 10 activation, because all Insiders should have free "licence" that is tied to my Microsoft e-mail account?
Now my Windows 10 Insider 10586 build isn't activated. How can I activate it? Shouldn't all Insider versions be free? Should I sign for Windows Insider program all over again?
View 5 Replies
Jan 3, 2016
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 Replies
Jul 29, 2015
I've been having a problem with upgrading to Windows 10. I've tried using the tool both by running it on my PC and putting it on a USB. It gets through the first part of copying files and does the first reboot, then it starts back to the screen and the Installing Features and Drivers sits at 0% for a few seconds then resets and restores my old version with this error:
0xC1900101 - 0x30018 - The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.
When I originally looked this error up I read that it might be an encryption error so I decrypted both of my drives, ran the install again.. Same error. So now I am at a complete loss as to what to do so I can get myself upgraded.
System:
Windows 8.1 Pro x64
Mobo: ASUS ROG Maximus VII Hero
PCU: Intel i7 4790k 4.00 GHz
GPU: ASUS ROG MARS760x2 (2 GTX 760 chips on one card)
RAM: 16GB DDR3
View 4 Replies
Dec 18, 2015
At one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:
Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition
I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.
View 5 Replies
Sep 11, 2015
I can get Steam to launch, but only after having the PC be in sleep mode. I can't get Steam to start with Windows 10 either. I've uninstalled, reinstalled, deleted the blob files and various other things several times. No clue what the issue is.
View 7 Replies
Oct 15, 2015
I have a laptop that I took the HDD out of and connected it to another Windows 10 machine.
I ran the command
Dism /Image:e: /Cleanup-Image /RestoreHealth
But get the error
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Error: 87
The cleanup-image option is unknown.
For more information, refer to by running DISM.exe /?.
The DISM log file can be found at C:WindowsLogsDISMdism.log
View 1 Replies
Jul 30, 2015
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
View 2 Replies
Aug 3, 2015
For a couple of days, I am trying every solution from this forum, for windows 10 upgrade on my laptop Dell 15 L502x (early 2011) with windows 7 Home Premium. I tryed via Windows upgrade system tray icon (after restart - black screen,mouse pointer), then I tryed wit ISO on dvd/USB, same problem. After that I have disable one graphic card, then another, in both cases, same problem. Every time(when black screen come) I tryed with CTRL and then type password - no result. I have updated all my drivers, all updates are downloaded,
View 9 Replies
Aug 6, 2015
Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 Replies
Jul 30, 2015
NVIDIA driver update for NVIDIA GeForce GT 620 fails to update in Windows 10 - Error 0x80070002 - After upgrading, I lost my 2nd monitor.
View 2 Replies
Aug 8, 2015
I have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
View 1 Replies
Jul 31, 2015
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
View 1 Replies
Aug 9, 2015
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 Replies
Nov 22, 2015
Mastercook 15 not Compatible Windows 10 ver 1511 bld 10586.11 ... Since update Mastercook 15 fails to print. Windows error and program shuts down. Contacted Mastercook support and this is apparently a windows compatibility problem now. Note when using Mastercook 11 when trying to print receive error can't locate print drivers.
View 4 Replies
Jan 21, 2016
how to solve this error, I have an asus p8z77-v lk mother board and an intel i7 32 bit processor. Windows10 seems to complete the installation then exits with the error "Does not support the processor configuration. error # '0xc1900101-0x30017' It then reverts back to win7.
View 1 Replies
Sep 3, 2015
I installed my Windows 10 and everything was going smoothly. It has installed 2 updates from the day I've installed it and everything was ok. Recently updates KB3081448 and KB3081449 came out but it doesn't want to download them. Instead it gives me error 0x800703f1. My drivers are up to date and my PC is clean from viruses. I also tried installing them manually. It failed after step 2 of the installation...
View 9 Replies
Sep 13, 2015
I am currently running windows 10.
I did an upgrade and clean install from windows 8.1.
Now I want to reinstall windows 10, but when I'm entering the windows 10 or 8.1 key I receive an invalid key.
What can I do in order to get a valid windows key to work with the new windows 10 installation?
View 1 Replies
Feb 17, 2015
I am trying to install the following update:
When I get the following error and errorcode:
Restarting is not working.
View 3 Replies
Sep 9, 2015
Everytime I try update my windows 10 it gives this error.... I've searched google and all i see is ads for tech utilities...
View 9 Replies
Mar 5, 2016
Just upgraded a laptop of a friend from Windows 8 to Windows 10....all went smoothly, except when starting up get the message Windows has not loaded correctly......with an error message DRV - possibly IRQ with a number which she couldn't write down quick enough
she he has tried the troubleshooting steps, but does not want to reset and lose apps or data....there is an option to recover back to Windows 8, but don't really want to do,this ' yet '
She was unable to get into safe mode, as I have read turning off fast boot can solve this issue, or perhaps a clean boot...
before upgrading she had had McAfee and avast installed, I planned to uninstall McAfee after the upgrade...
I did a true image backup first, so that is an option also...
View 9 Replies
