Updates :: Clean Install Activates Then Deactivates
Sep 18, 2015
Ye old Error code: 0xC004C003
I made sure 8.1 Pro to the upgrade to 10 Pro was activated before I did a clean install. This last month the system has been acting weird. Once in windows its fine, but I was getting startup errors that made windows restart while starting dealing with HD audio. Not sure if the realtek or Nvidia.
Anyhow during all this and now my system had been activated, then deactivated, then activated. Etc. Etc. Etc. I think its finally settled on deactivated.
No hardware changes in all this other than driver and windows updates. So yea.. nothing on Google search nor here mentions this exact problem. Again, I need to point out it was activated with the upgrade first from 8.1 to 10. It also showed activated in 10 for awhile.
The system should only deactivate if new base hardware was installed which this isn't the case.
View 7 Replies
Similar Messages:
Jan 5, 2016
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
View 9 Replies
Sep 14, 2015
If I understood this : clearly, then does it mean that Windows will activate itself from some Windows activation servers that are somehow written into my hardware even if I do a clean install deleting everything in my Windows partition?
Also, since the built-in "Create a Recovery Drive" will take forever or display an error when ''Backup system files to the recovery drive' is checked", I'm trying to create an Installation media. But I'm stuck with which ISO I should download. Now, there's Windows 10, Windows 10 Single Language, Windows 10 Home, Windows 10 Home N. I'm running Windows 10 Home at the moment. Which was upgraded from Windows 8.1(I think there was ''Single Language'' written after "8.1", not sure though). Which Version should I download. And if I install the wrong version by chance, will Windows still activate after I find out and install the right version? Please clarify these.... I'm really looking forward to do a clean-install to get rid of all the errors and bugs with drivers and just start over.
*DETAILS: Windows 10 Home Build 10240 [Upgraded via free upgrade, had an OEM version of Windows 8.1 when first bought]
View 8 Replies
Oct 23, 2015
I've read the instructions on various websites.
I had Windows 8.1 Home activated and updated.
Upgraded to Windows 10 Home. It activated and updated.
Did a clean install of Windows 10 Home and it won't activate. I skipped both key input screens and it says my key is blocked.
View 8 Replies
Aug 18, 2015
A friend's Asus 8.1 laptop was stuck in an automatic repair loop so I suggested that he upgrade to Windows 10.
Because he was unable to access his system, I opted for a clean install and I created a bootable Win 10 usb on another pc. I used this usb to insall Win 10 on his machine, skipping any requests to activate.
I was under the impression that Win 10 would automatically activate on installation. I'm not sure he ever signed up for the free upgrade offer before Win 8 on his machine decided to implode.
View 5 Replies
Jan 9, 2016
I have a laptop that was originally on Windows 8.1. I upgraded it to Windows 10 recently, however there were a variety of deeply embedded issues. I tried every troubleshooting method I could find, tried to revert back to 8.1, and tried to repair and reset Windows 10. Nothing was working, so I had to use installation media from doing a clean install on my PC to install a fresh version of Windows 10 on my laptop.
I was forced to format the hard drive, and delete all the partitions to even get the clean install to work (the upgrade did a real number on my initial system), and because of this I'm now unable to activate Windows 10. The upgrade was the Home edition, and I clean installed the Home N edition (as far as I'm aware there's little to no difference). I made a note of the product key that was listed in the upgraded 10 before the clean install, which I assume was my product key from 8.1 that carried over, as it is 20 characters long and not 25.
Is there any way I can activate my clean installed Windows 10 Home N in this situation?
View 3 Replies
Jul 29, 2015
I upgraded my Windows 7 to Windows 10 using the windows updater. After windows 10 was installed, I decided to download this Windows 10 and chose the USB option. I booted into my USB and when selecting the partition, I deleted every partition that was there (even the system). Now I am on windows 10 with no activation. I have the Windows 7 product key but it does not work.
P.S its not pirated Windows 7. I got it from Dream spark (on the hub) students saving.
View 9 Replies
Oct 14, 2015
I can not activate my windows 10,I have done all with the genuine file but it won't activate anyway,could it be that I not upgrade it to w 10?,I did a Clean install directly!
View 5 Replies
Nov 7, 2015
So a few months back I upgraded for free from win7 to win10 Pro. Today I got a new CPU, RAM, MBO (also currently using the new MBO onboard GPU, waiting for my new one) and did a clean install of Win10 (from USB created with MediaCreationToolkit). Now I remember reading somewhere about steps to activate Windows 10 after hardware change, but can't seem to find it anywhere, so thought I'd ask here.The error I'm getting: 0x004C003 The activation server determined the specified product key is blocked.The thing is I need to get this PC up to my needs fast, and this doesn't cope well with that..
View 3 Replies
Feb 10, 2016
Since the Win10 Upgrade fails on my HP DV6 notebook, I decided to do a clean install.
But now, it won't take the Win7 product key for activation!!
I called MS and they told me that a clean-install will NOT activate using Win7 product keys and that I have to purchase a product key.
I got this same story from two different MS reps.
I thought you COULD activate a clean-install using Win7 key using build 10586.
View 9 Replies
Nov 16, 2015
I'm having issues with deploying out-of the box windows 10 on a Lenovo B50-80EW preinstalled win 7 pro and upgradable to win 8.1 Pro however since the new windows 10 update build 1511 ISO I download I thought it would go through OK . without have to do first upgrade install to windows 10
Secure BOOT on UEFI ON
From putting the windows 10 ISO in drive it doesn't prompt for activation key. As soon as network settings prompts I press shift/ Contro / F3
Now in administrator Mode I check windows is activated however I have the same model of laptop and I want to mass deploy an image but want to use the OEM key embedded in BIOS to each laptop of this model is this possible to be done as I deployed on another machine and got message saying this key is already in use is there an issue with the new ISO available from Microsoft .
I also tried fresh install with out no ethernet or wireless connected and still get on same machine windows is activated in audit mode on fresh setup.
View 3 Replies
Sep 2, 2015
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
View 1 Replies
Oct 16, 2015
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
View 9 Replies
Jan 10, 2016
ow slow Disk Cleanup has become if you choose 'Clean up system files' and select Windows Update Cleanup after a clean install of Windows 10?
Just the Windows Update Cleanup part is slow - took about 20-25 minutes to get through it today.
Never used to be like that and I'm pretty sure it's something recent. I've done a few clean installs of Threshold 2 since November and it wasn't slow like that until the past week or so (I've done 2 clean installs over the past week and they've both been slow with Windows Update Cleanup).
As I recall. Windows 8 had the same 'bug' and it now seems to have crept into Windows 10 (at least for me).
View 9 Replies
Aug 3, 2015
My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.
View 1 Replies
Aug 11, 2015
I wanted to clarify whether updates that require a restart to install, only install if you actually click 'restart' or do they install if you normally shutdown the computer and then turn it on again later?
I'm sure you could do it that way on Windows 7. Its difficult having to restart my laptop every time, I'd rather shut down normally at the end of the day once i'm done with it and then following day upon booting up, updates install.
View 8 Replies
Oct 14, 2015
When I open my Windows Update, the Upgrade to Windows 10 is there ready for me to download. It has a button saying "Get Started". I checked to see what available updates are ready for me and it shows I have about 8 Windows 7 updates to be installed. How do I get around the Upgrade to Windows 10 in order to only install the Windows 7 updates? I am presently holding off in the installation of Windows 10, but I do want to continue updating my Windows 7.
View 4 Replies
Dec 22, 2015
How can I clean install windows 10 on a new SSD, saving the fact that I had original windows (that was purchased built in with the laptop)? Do I need to find the CD key?I have a generic one as I upgraded to windows 10 for free (or are all windows 10 have generic CD keys?).How can I use my Windows licence on a new SSD?
View 1 Replies
Aug 2, 2015
Mine was with Win 7. This was done few years back throughWin7 upgrade disk. I have this Win 7 upgrade disk and COA for it. (Bought from Amazon).... Can I revert back to Win 7.....
View 3 Replies
Dec 25, 2015
My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 Replies
Dec 4, 2015
I'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 Replies
Jul 14, 2015
All the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 Replies
Aug 12, 2015
My PC was running 8.1 French version converted to English version (Reseller screwed up).In practice a lot of the stuff was displayed sometimes in Eng sometimes in French. I have the 8.1 French CD.So instead of doing the upgrade which I thought would result in another mishmash of languages, I did a clean install of 10 Home Eng via USB key downloaded install media.Apart from a few video probs (BSOD) blinking cursor, all went well.I cannot use 8.1 product key to activate. Looks like I may have to buy new product key for W10.
View 19 Replies
Aug 17, 2015
I had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
View 1 Replies
Jul 30, 2015
I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 Replies
Aug 9, 2015
I have been an Insider since the very first Insider build was released. I had installed each and every build first being on the Slow ring and the on the Fast. I had upgraded from a genuine Windows 8.1 Pro.
When the final RTM build TH1 Professional 10240 was released to Insiders ahead of schedule, I readily installed it and my machine was permanently activated at that time. The product key used was a generic one ending in 3V66T. Many of you may be knowing this.
Today, in fact just now, I formatted my system partition and installed a clean copy of Windows 10 Pro from USB which I had created using the Microsoft Creation Tool. When the setup asked me for a product key, I entered the same generic key as stated above. But now when I go to the Settings, it says the key doesn't work and hence, my machine cannot be activated. I signed-in using my Microsoft account before using the PC.
What the heck! I am an Insider. And didn't expect this to happen. What should I do next? Would the machine get activated itself after some time?
View 11 Replies
