Updates :: DISM Offline Repair Fails With (Cleanup-image Option Is Unknown)
Oct 15, 2015
I have a laptop that I took the HDD out of and connected it to another Windows 10 machine.
I ran the command
Dism /Image:e: /Cleanup-Image /RestoreHealth
But get the error
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Error: 87
The cleanup-image option is unknown.
For more information, refer to by running DISM.exe /?.
The DISM log file can be found at C:WindowsLogsDISMdism.log
View 1 Replies
Similar Messages:
Feb 3, 2016
I just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
View 9 Replies
Aug 2, 2015
I have been trying to fix my windows 10 corrupted files but I have been unabled to recover it. I tried every possible way of recovering using DISM commands, but to no avail. I tried also the sfc /scannow but as usual this command hardly ever fixes issues regarding corrupted files. I have tried using dism in several ways by specifying the location and the install.esd file from my usb flashdrive windows copy and even tried the health commands on powershell..still wont work. The first command I tried and for all of them I get the same error message, which looks like this:
C:WINDOWSsystem32>DISM.exe /Online /Cleanup-image /Restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see [URL] .....
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
I have heard people saying that I need to refresh my pc as a last solution and I don't want that since I have all my settings and programs migrated from the upgrade...
I have been reading on the web that there is a way of specifying the packages missing via command and then download them manually..
[URL]
View 6 Replies
Aug 17, 2015
Does windows 10 disk cleanup remove windows updates? I updated windows 10 , i reboot and i run disk cleanup as administrator but in the list there is no entry about windows updates....
View 9 Replies
Aug 26, 2015
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
View 2 Replies
Aug 29, 2015
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
View 14 Replies
Oct 1, 2015
I have managed to create a USB pen drive to apply WIM images using the DISM Apply-image command in 64bit so I know it can be done but how to create a pen to apply 32bit WIM images
View 6 Replies
Nov 24, 2015
Using the Dism command in Windows ADK for Windows 10 v1511, it is possible to change the name and description of a volume image saved to a wim file?
If not, you can tell me the method more proper to do this avoiding the use of the old imageX command?
View 1 Replies
Dec 21, 2015
Does Defender Offline is supposed to be a default option for the recovery environment? I don't see any options for it, or do I have to use ICD to create a custom option for the WIM?
View 2 Replies
Dec 4, 2015
For example, update kb3116908 released.
I don't want to use Windows Update for each system and I need the offline installer.Also can't get from Microsoft Catalog.
Any direct download link from Microsoft?
View 2 Replies
Nov 16, 2015
Windows 10 Disk Usage is 100% Its so slow that its unusable for me. I tried startup repair with and without the CD and it fails with the Log saying its due to an incompatible OS. Note: I can only use my PC in safe mode and I just recently upgraded from Windows 7 a few months ago.
View 1 Replies
Aug 29, 2015
My question is, does the Windows 10 option to "reset and keep files" repair everything, including any broken registry things that I might have screwed up? I'm not that experienced with this, so could be a silly question.
Some background info: my computer was basically functioning normally, except for some kind of minor issues (slow downs, occasional program crashes, etc) and warnings that kept popping up in my event viewer yet I didn't really "see" the effects of most of them in everyday computer use (I'm an amateur though). This was not virus or malware related, I don't think. (I ran numerous virus scans and also used virus/malware removal, even though it didn't appear I had any, plus I have Avast and MBAM always on my computer.)
So I'm wondering if I probably screwed up the registry because I stupidly used CCleaner's registry clean-up a couple times, and have since learned I should never touch that.
I ran the Dell diagnostics to make sure it wasn't a hardware issue, by the way, and that all passed.
I had Windows 7 and did the upgrade to Windows 10. I just decided to do Windows 10's option to "reset and keep files" to do a clean install to see if that fixes these things. So I'm wondering if the registry is repaired with that kind of reset? And if it never was the registry that was the problem, will the other potential causes be repaired as well? Just want to make sure I made the right choice to reset.
View 1 Replies
Dec 20, 2015
Windows 10 x64 had been working fine. Yesterday, I noticed the system had gone to the spinning circle... I walked away and gave it overnight, but no change. After reboot, I get to the login screen for 30 seconds or so - with no user accounts showing - then it goes to the solid blue screen with spinning dot circle. I suspect the latest update was applied "while I was sleeping".
What I've tried:
Rebooting (Goes to same place)
Safe mode (same login screen - no user accounts listed)
System Restore (No restore points - argh! why?!?!)
System Image Recovery (No system images found)
Startup Repair (allows either admin to authenticate, says "Diagnosing your pc" , then fails) -- logs to d:windowssystem32logfilessrtsrtrail.txt, open in notepad, shows no errors, "OS booted successfully"
Command prompt (works - but what should I look at?)
Go back to previous build - save my files (fails at about 40%) - I would prefer not to delete my files. (though they are backed up)
View 12 Replies
Nov 23, 2015
So on RTM build, you used to have these options:
But now, in TH2, you only have this:
Is it going to be like this every single update? If so, I'm done with Windows 10.
View 6 Replies
Mar 5, 2016
I currently have Windows 8.1 Pro installed on my laptop and in the process of doing a clean install of Windows 10 Pro. Unfortunately the Media Creation Tool used for creating a Windows 10 ISO doesn't provide me with the option to choose the Pro version of W10 the only two options being Windows 10 and Windows 10 (N).
From browsing about I've learned that the Media Creation Tool is supposed to detect what Windows version you have installed and give the proper options, but I've double checked and my computer does indeed have W8.1 Pro installed on it. What I must do to install the Pro version of W10?
View 1 Replies
Sep 1, 2015
I guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
View 9 Replies
Jan 3, 2016
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 Replies
Nov 13, 2015
I attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 Replies
Aug 14, 2015
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
View 1 Replies
Aug 15, 2015
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 Replies
Dec 18, 2015
At one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:
Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition
I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.
View 5 Replies
Sep 11, 2015
I can get Steam to launch, but only after having the PC be in sleep mode. I can't get Steam to start with Windows 10 either. I've uninstalled, reinstalled, deleted the blob files and various other things several times. No clue what the issue is.
View 7 Replies
Dec 21, 2015
how there's no option to turn off automatic Windows Updates. There's only the option to allow new updates to download and install automatically. And the other option to choose when you want to install the updates. But no option to turn off Windows Update from downloading updates. If you wanted to download and check for new updates manually.
Why must Windows 10 security depend on Windows Defender to run occasional scans and to protect the computer, when you have your own security product such as example Norton. Which does regular frequent scans and has more regular definition updates than Windows Defender?If you have a high performance computer. Store apps you can get and install. Most apps have lagging and crashing issues at odd times if your in a middle of a project, watching media or playing mobile app games.
Using third party themes that Microsoft provides. Particularly themes that has multiple wallpaper slideshows. Causes desktop to act up. If you adjust if you're a gamer. Adjusting the graphic settings from Window to Full Screen or vice versa constantly. It causes desktop screen to be chopped, leaving echo past activity screens that you have closed. Which then makes you having to come to the conclusion of restarting Windows to get it back to normal.
As for pc games. If you play some games that aren't Windows 10 supported. You experience issues trying to get the game to load, crashing back to desktop or even internet stability issues for games that uses internet. It amazes me how Microsoft promotes Windows 10 with full of pride of them saying in certain Outlook Microsoft newsletter promotions. That they say Windows 10 is perfect for gaming. When it clearly proves the opposite.
View 4 Replies
Sep 11, 2015
I can't turn off update delivery optimization, it keeps reseting to on everytime i restart pc
this is the option in update & security > windows update > advanced options > choose how updates are delivered
View 9 Replies
Aug 16, 2015
I have set group policy to notify for update and notify for download, so when I manually check for updates, it shows any that are available, however when there are multiple updates available, there is no option to download/install an individual one, it just downloads / installs all of them?
Is there a way around this, as there is no point of the manual setting if it downloads /installs all of them at once anyway?
View 7 Replies
Dec 26, 2015
Which boxes are safe to check on disk cleanup. I have 17.4 gb of space used up by the ( previous windows installations ) check box. Is this safe to check and delete ?
View 3 Replies
