I've been trying unsuccessfully to use Windows Update but keep getting the error code 0x800705b4. Windows Defender is turned off, and both Windows Firewall and Norton Anti-Virus has been temporarily disabled, but it still won't work. I don't know what's wrong.
View 6 Replies
As I use a proprietary antirvirus, and on a whim, I just thought to check my Windows Defender setting, only to find to find that it was turned on*. (I could swear I turned it off, sometime in the past. I was further surprised to find that the On/Off button is disabled--so I CAN'T turn it off!
I'm further surprised to find the notice, under Settings/Windows Defender, which says "You can turn this off temporarily, but if we find that it is turned off for a while we'll turn it back on again, automatically." (One mystery solved*)
As I understand it, Windows Defender is merely Microsoft's own notion of free antivirus software--so when Windows turns Defender on again, this means I not only have two antivirus packages running (and possibly interfering with each other--involuntarily) but also that I now seem to have no choice in the matter--unless, of course, I permanently uninstall the antivirus software that I paid good money for.
Questions: How do I re-enable the Windows Defender On/Off button; and How do I DISable Windows ability to turn it on again?
I'm logged on, it's my computer, I'm the administrator, there are no AV running. However I get the system error " Windows Defender is being managed by your system administrator" controlled by group policy. All I want to do is turn it on. Local Group Policy shows nothing is configured...??
View 3 RepliesI have another AV installed.
How do I get rid of the Windows Defender message:
"This app has been turned off and isn't monitoring your computer"
It appears after every reboot.
I can't turn on Windows Defender. When I try to launch it, a window saying "This app has been turned off and is not monitoring your computer" pops up. I tried everything that's listed on the MS answers thread. I am unable to start the Windows Security Centre service too. It doesn't stay enabled i.e., it becomes disabled as soon as I close the Services app. I have no anti-virus installed. Been using WD since I upgraded.
View 1 RepliesNot sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page.
I, for one, am happy about this change, since those "Definition Update for Windows Defender - KB2267602" were clogging up the update history page.
I have disabled Window Defender, but the Updates of Windows Defender Definition are still downloaded and installed.How do I stop it? I tried to use the Show or Hide updates to hide the Update of Windows Defender Definition, but it did not appear there.
View 1 RepliesI am experiencing a strange issue with the updates of Windows 10 due to the disabled Defender. I have installed AVAST Free which in turn has disabled the Defender. With the Defender disabled, the system tries to update it and fails, but it also blocks the rest of the updates.For now I have fixed this by uninstalling AVAST.
View 6 RepliesThe fall update removes all restore points - cannot restore to prior to update.Also, it turns off protection settings in CP/System Protection/Configure. You will have to press button to turn on system protection and assign disk space for restore points. after Fall Update completes and create an initial restore point.
View 3 RepliesIt was available and up to date before the upgrade. I have turned it back on. Why did the upgrade Build 10586 turn it off? I did use the Media Creation Tool to upgrade rather than wait for "my turn" with Windows Update.
View 1 RepliesA: Is there an issue with explorer.exe crashing and reopening on build 10041?
B: Is there a fix for this?
C: how can I get this update because I can't use the main windows explorer UI and Auto updates are turned off?
Have had this error for a couple days now. Tried regular checks to verify system components and online image and windows update service diagnostics, cleaned up SoftwareDistribution, turned off non-Microsoft auto starting services, - all to no avail.
Also, ran netfxsetupverifier, which gave me the only error - aspnet.mof missing, which I presume is OK.
I came home from shopping and turned on my custom built desktop PC and it gave me a BSOD. On the screen it said "system thread exception not handled". This only happened once
DIN-PC-10_10_2015_190348_82.zip
System Spec
Computer type: PC/DesktopSystem
Manufacturer/Model Number: Custom built
OS: Windows 10 64 bit Home
CPU: Intel i7 3770k (not overclocked)
Motherboard: ASUS P8Z77-V
Memory: Corsair 16GB
[Code] ....
The search bar, lower left on the task bar, does not allow input for searching. It blinks, and does not allow for a question to be entered. Perhaps I've turned it off, but would like it back on.
View 2 RepliesI recently updated my pc software frm win 7 to 10.nw when I switch on pc after win logo display the screen remain blank fa abt 30 mins then it goes to sleep. This problem is happening after update to 10.
View 1 RepliesAfter the upgrade from 8.1 pro to 10, i noticed system protection was turned off. I went ahead and turned it back on and moved the slider back to ten percent.
View 1 RepliesI am beginning to get BSODS randomly, even when im doing nothing on my pc.
I get either IRQL_NOT_LESS_OR_EQUAL or SYSTEM_SERVICE_EXCEPTION
debug-DESKTOP-DQ0658B-Sun_10_11_2015_131102_45.zip
I have a PC with the following configuration:
Intel Core I5-4460 Haswell 3.2GHz
GIGABYTE GA-Z97-D3HKingston
HyperX Fury Blu 1x8GB DDR3 1866MHz CL10 1.5V
Kingston SSDNow V300 240GB + SAMSUNG Spinpoint F1 HD753LJ 750GB
SeaSonic S12II Bronze 620W
Cooler Master Haf 912 Compact
I always used to set the turn off display after 2 or 3 minutes, everything was working fine with my old PC but after the new PC whenever the screen is turned off i can't turn it on again buy using the mouse or keyboard.
This problem was while using windows 8.1 and after installing windows 10 pro the problem is still there.
Tried turn off hibernate solution but with no luck.
Connection with monitor is throw HDMI cable with the internal Intel 4600 VGA Card
I fixed some issues on my of and now when the pc is off the USB ports remain on. Is there anyway where I can turn them off without ungplugging them ex: I have some USB lights for my pc and they are always on now same for my mouse lights.
View 1 RepliesMy pc used to be on windows 8.1 and I never had this problem. Ever since I installed windows 10 I have noticed that it has been randomly starting up. I shut it down and then wake up the next day finding that it had randomly turned on during the night. It shows the log in page as usual with no signs of being locked, standby or anything else. it shows as if i shut it down and turned it back on again manually but i haven't. This only started to happen after I updated windows 8.1 to 10 so i dont think it has anything to do with the motherboard.
View 1 Repliesrecently upgraded to win10 and that went well.. However on the last update (I think) that went bad. My pc now looses all apps when turned off. When restarted, I have to reload windows live mail and re-enter my email account. All my contacts seem to have been lost as is my email history.I use google as my web browser and I have to re-enter all my settings here also.
When turned on, my pc loads quickly but after logging on, it goes to "preparing windows" which takes some time before it is usable.
updates installed around the time of problem are;
kb3081448
kb3081449
kb3081452
kb3081444
..this is the update after which I think the problem started
kb3081441
I have windows 10. When I turned on my laptop it says that it updating and it stucks in 87% then I turned it off and after that I opened it it still updating?? Is it normal with windows 10 ??
View 1 RepliesYesterday, I inserted a flash drive on my PC and it was loaded with trojans. I managed to clear them with Kaspersky but after that I noticed that all the hidden files in my C drive have turned Un-hidden. (Including desktop.ini's)
View 6 RepliesSo I was doing a system restore on my newly upgraded Windows 10. It was stuck at 46% so I restarted it (which was a stupid thing I know). After that the laptop won't go beyond the black screen. Whenever I boot the laptop the lenovo logo appears and the black screen after and that's it. I'm really worried now.
View 1 RepliesSomehow not sure if a update did it but cortana got turned off and so did my location stuff, so what the defaults are as i never played with it much, but want to reset it to default?
View 6 RepliesI have the Auto Arrange Icons turned off.But when I try to drag an icon somewhere it refuses displaying a circle with a line through it.I can Ctrl-X and Ctrl-V it to a folder somewhere else but that is not what I want to do.I have tried using 'Fences' (but it will not let me drag the items into the fences either (have deleted 'Fences' just in case it was causing the problem - it was not the cause of the problem).I don't have a lot of icons on my screen, but do like to arrange them.
View 3 Replies
