Updates :: Deleting (Failed Updates) In Update History?
Feb 10, 2016
I've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?
I noticed this morning, when I was trying to correlate a problem I was having with Quicken, that my update history is missing from Settings. View your Update History. I realize that I can see it in Control Panel Programs. Programs and Features Installed Updates but I am curious if there is a way that I can bring this info back to Settings.
Not sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page.
I, for one, am happy about this change, since those "Definition Update for Windows Defender - KB2267602" were clogging up the update history page.
The update creating this issue: Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140743).These are the steps of the loop:
1) My PC downloads this update automatically in the background. I have no option to stop my PC from downloading it. 2) I am forced to install this update. There is no option for me to shut down/restart without having to install the update. 3) During the restart, I get a notification that my PC was unable to complete the update and hence the changes are rolled back and the whole process starts again.
This thing has been going on for days, wasting my time and getting on my nerves.Why is Microsoft so dumb?
A) If at all my PC has downloaded an update, why don't they save it somewhere on my PC till the update process is successfully complete instead of downloading it again and again wasting my bandwidth? B) Why have they not given options to opt out of (downloading/installing) troublesome updates like this? C) Is there a solution to this issue?
This the first time am having an issues with the update center.the rest of updates from today (Office 16) were fine.Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.the only way to get rid of it (after 30 min) is to press the RESET button.
Tried sfc /scannow => CBS.Log
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete 2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components 2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
I'm trying to intstall updates for Windows 7 in Control Panel/Check for updates/Install Updates, but Upgrade to Windows 10 is on screen and I can't seem to proceed without the update. I already tried it and I don't like it so backed out. I don't want to upgrade and want it off of my computer. How do I remove it and all the components associated with it? I only use it for personal use, email, Facebook, a few games, etc. and not for business. 10 was too confusing and there's no one over my shoulder teaching me a new system and where all my stuff went.
I have a Dell XPS 8700 with Win 10 Pro and 16 GB of Ram. I had to install Driver updates to Roxio Creator NXT 4 to copy and convert DVDs. I was asked what was the name of the updated drivers. How do I find the history in my computer for the driver updates?
I upgraded my laptop to Windows 10 right after Win10 was released and, when I was trying to attach my HP 5740 Wifi printer using the driver cd, two updates appeared in the Windows Update dialog that will not install, nor can I remove them.Is there a way to get rid of these two updates from the Windows Update dialog?
My computer's SSD failed, and I just bought a SSD and installed Windows 10 on it. However, it is not activated. I originally had Windows 7, then installed Windows 8 Pro, then upgraded to Windows 10. This is all legal.
However, I ran a BIOS product key checker on my computer, and it shows that I don't have a product key in my BIOS. Is there anything I can do?
This is also quite an old machine (from 2007), would it support BIOS product key?
On one of my computers Silverlight updates have failed 26 times. Silverlight does not appear on my two newer computers so I did some research and found that it is no longer used. Should I remove it from my computer so Microsoft stops trying to install to it?
My son (26) just returned a long term loan P8B67B Deluxe to me with Linux and Win 7 on it. I upgraded 7 successfully, but after updates installed last night the PC refuses to boot saying "error, no such partition, Entering rescue mode .. grub rescue>" Repeated boot attempts saw it fall into error 53 on the mobo lcd display. Removing one ram stick brought me back to booting to "error, no such partition, Entering rescue mode .. grub rescue>"
Trying to boot just one HDD either gives the above message, or "error, no such device : 521683dd-0417-4a66-b3fb-c6c67b9cc9fo grub rescue>"
I don't need the linux. That was my engineer son. What fixes are there to bring it to Win 10 alone? I don't know the new key or the old 7 key. Should have checked and written it down
Date: 10th September 2015. Machine working fine under windows 10 for over a month. Checked to see what Microsoft updates after doing a Microsoft Defender full scan and everything ok. It seemed from settings->check for updates that there were a number of updates that required the machine to download and restart. Decided to update immediately and did the same on a dell laptop and Linx 10 tablet all running windows 10. All machines did update and restarted fine, except my main laptop - Toshiba Satellite S55t-A5334 did not recover after the update and is now continuously in "Restarting" loop. Tried powering up and down and trying to force it to reset into some sort of safe mode. how I can get it into state that will allow me to go back to the last known working state as I'm fairly sure this is an update that is not compatible with the hardware.
Auto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
I am trying to install the .net 3.5 update for my Windows 10 Pro rig. I tried the usual way (enabling) with no luck: the system sits on searching for file and never goes anywhere. (I let it search overnight with no luck). I tried the method suggested HERE with no luck either (it sits there telling me the image version but never starts the "Enabling Features" process. I've let it sit there for 30 minutes with no success.
I am trying to do the second step via a Windows 10 USB install, not a DVD. I didn't bother trying to create an ISO since I didn't think that would matter. In either case, I feel really stuck. I am unable to run a few legacy games because of this stupid .net 3.5 issue. It's really frustrating.
I'm currently running build 9926, and my computer keeps getting this message "Install a new build of Windows now" "This build of windows has expired, so your PC will restart every few hours, and eventually will fail to start. Go online for more information."
So I've tried installing the following ISO [URL] but I'm not sure how to properly install a new build of windows 10.
I have Win10 pro and set to "notify to schedule restart" and "defer updates". Also have "give me updates for other MS products..." unchecked.However, Win10 just decided to reboot the computer and apply updates. What the heck is this? I had a major session of work going on.
Does windows 10 disk cleanup remove windows updates? I updated windows 10 , i reboot and i run disk cleanup as administrator but in the list there is no entry about windows updates....
I cant seem to run MS Windows and Office auto updates (or manual).
keep getting the following message
'Updates are available, but we temporarily need 489.48 MB-489.48 MB of space to download. Remove some things you don't need right now and we'll try again.'
There is currently 10.6GB of free space on the system partition.
I have just (on Friday 20 Feb 2016) installed the Windows 10 upgrade from the MS site.
Took 6/7 attempts to finally get it done.
HDMI driver not working
Audio not working properly (keeps saying USB Audio playback default) I don't have anything plugged in. I have a realtek HD Audio installed.
Wifi is very flaky.....keeps disconnecting or reporting limited connection intermittently......15/20 times a day.
Running virgin Superhub, with 150mb pipe,
everything was working perfectly prior to the Upgrade from windows 7 sp1 to Windows 10.