Updates :: Getting All The Updates Till Date At A Time
Oct 22, 2015
I want to do a fresh install windows10 in my laptop. After completion of the fresh installation, it will update all its updates till date which will take much time to complete. Also it will cost for data. I would like to get all the updates to install it offline.
when you click a link in a toolbar that it updates the Date Modified field. While not important in itself, the side-effect is it makes the toolbar link get included with the next backup run.
I've had these personalised toolbars sitting in the taskbar since Windows 7 without this happening before.
I did a clean install to Windows 10 on my new computer on Feb. 12. I also installed Office 2016 at that time. Since then there were a few updates on that day, Feb 12 and two or more on Feb 14th. and then nothing. And nothing at all for Office 2016. Am I missing something or have updates really slowed down.
Not sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page.
I, for one, am happy about this change, since those "Definition Update for Windows Defender - KB2267602" were clogging up the update history page.
Auto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
I'm trying to intstall updates for Windows 7 in Control Panel/Check for updates/Install Updates, but Upgrade to Windows 10 is on screen and I can't seem to proceed without the update. I already tried it and I don't like it so backed out. I don't want to upgrade and want it off of my computer. How do I remove it and all the components associated with it? I only use it for personal use, email, Facebook, a few games, etc. and not for business. 10 was too confusing and there's no one over my shoulder teaching me a new system and where all my stuff went.
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
I am trying to install the .net 3.5 update for my Windows 10 Pro rig. I tried the usual way (enabling) with no luck: the system sits on searching for file and never goes anywhere. (I let it search overnight with no luck). I tried the method suggested HERE with no luck either (it sits there telling me the image version but never starts the "Enabling Features" process. I've let it sit there for 30 minutes with no success.
I am trying to do the second step via a Windows 10 USB install, not a DVD. I didn't bother trying to create an ISO since I didn't think that would matter. In either case, I feel really stuck. I am unable to run a few legacy games because of this stupid .net 3.5 issue. It's really frustrating.
I have Win10 pro and set to "notify to schedule restart" and "defer updates". Also have "give me updates for other MS products..." unchecked.However, Win10 just decided to reboot the computer and apply updates. What the heck is this? I had a major session of work going on.
Does windows 10 disk cleanup remove windows updates? I updated windows 10 , i reboot and i run disk cleanup as administrator but in the list there is no entry about windows updates....
I cant seem to run MS Windows and Office auto updates (or manual).
keep getting the following message
'Updates are available, but we temporarily need 489.48 MB-489.48 MB of space to download. Remove some things you don't need right now and we'll try again.'
There is currently 10.6GB of free space on the system partition.
I have just (on Friday 20 Feb 2016) installed the Windows 10 upgrade from the MS site.
Took 6/7 attempts to finally get it done.
HDMI driver not working
Audio not working properly (keeps saying USB Audio playback default) I don't have anything plugged in. I have a realtek HD Audio installed.
Wifi is very flaky.....keeps disconnecting or reporting limited connection intermittently......15/20 times a day.
Running virgin Superhub, with 150mb pipe,
everything was working perfectly prior to the Upgrade from windows 7 sp1 to Windows 10.
I've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?
I am running Windows 10 via Boot Camp on the new MacBook Retina. I have always had the slimmest/lightest notebook as I travel extensively for work and the new Apple product is impossible to beat in that regard (and Sony went out of the VAIO business). I hate OSX, never run it, I just boot straight to Windows 10 and things are awesome. Except...
I am usually the key presenter at important board meetings and customer meetings. I have a big/heavy notebook at work which I use 90% of the time, but when I hit the road I'm using my sleek/light Windows 10 MacBook. Issue is, when I arrive at my destination and am shown to the presentation room, I boot up Windows 10, launch the Powerpoint file from Dropbox, and -boom-, within 5 minutes I'm speaking in front of a large group.
I am concerned that at my next presentation, I'll whip out my thin/light notebook and as I start presenting I'll see some message about Windows 10 updating -or- Windows 10 needing a reboot to install updates.
Does Windows 10 know enough not to interrupt a full-screen Powerpoint presentation? Is there a mode to disable automatic updates? Or with its new update protocol I am at risk of an embarrassing update moment at my next series of live presentations?
Is there any way to restrict the peer to peer sharing of Windows Updates (WUDO, just so this shows up in searches) to only specific local networks? I know I can say to get/share updates with PCs on the local network, or local plus internet. But I'd like to restrict this further - don't share on every local network I happen to be on, but only on the local network when I'm at my office, for example.
All of my users have laptops, and most travel extensively. We have bad bandwidth at the office, so the P2P would definitely be nice. But I don't want them sharing updates when they're travelling, as they're often in locations with strict (and/or expensive) capping. Is there any way to do this without the user having to manually turn the option on or off depending on location?
I am trying to set the frequency detection of Windows update. So, I go to this menu in the Group Policy Editor:
As you can see though, that other setting must be enabled. So, I navigate to its menu and try to set it. I do not know what should I put in those boxes though...
- How can I set the Automatic Updates detection frequency to four hours?
I have disabled Window Defender, but the Updates of Windows Defender Definition are still downloaded and installed.How do I stop it? I tried to use the Show or Hide updates to hide the Update of Windows Defender Definition, but it did not appear there.
I think the "updates freezing" issue has come up in another thread but I can't find it momentarily.
The screen shots show what I've been looking at for two days now. Obviously something is amiss with Automatic Update but I dunno what, or what to do about it.
I have Windows 10 Home Edition, like millions of others. Like millions of others, I prefer to hibernate my computer rather than shut it down outright most nights. And like millions of others, I am getting awakened IN THE MIDDLE OF THE NIGHT because Windows 10 is trying to notify me about updates! Repeatedly.
When I want information about updates, I'll ask. I've turned off the Update Service on the Services tab of the Task Manager. After some hours or some days, it turns itself back on. A cat-and-mouse game with Microsoft. I have stopped the automatic updates themselves but I can't stop the stop the aggressive notifications. Should I be happy? At least the computer is no longer shutting down without warning IN THE MIDDLE OF A PROJECT THAT I'M WORKING ON to update. But it stills turns on at various hours of the night, cooking with its lid closed, to provide me unbidden notifications of updates.
I need to stop this NOW, otherwise Microsoft can shove Windows 10 where the sun don't shine. I own this computer, not Microsoft. Can it be done? Or do I go back to Linux?
Win 10 machine. Got it yesterday, it was checking for updates fine last night. In this evening and I thought I'd do a manual check but it's been running as checking for updates about 15 mins now. Is this normal. There is no way to cancel the check and kick it back off acain
I'm still not certain if the new builds that come out,( eg 10586.36, and now 10586.63) also contain all the latest Windows security updates as well? (not referring to defender updates I know they are distinct)
I've noticed that my Windows 10 PC (which had 10 installed from new, it is NOT an upgrade) has the latest build 10586.63 but I don't see any separate windows security updates coming along with them. Is having the latest build number 10586.63 mean that the OS has all the up to date security updates as well, including the .net security updates....