I guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 RepliesAlthough I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesI attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 RepliesHave not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 RepliesI am trying to install the following update:
When I get the following error and errorcode:
Restarting is not working.
Just found myself diggin' more and more in bugs and troubles in Windows 10. Now, when I'm looking for updates with Windows Update it shows me that the Updates cannot install and to check it out later, and then gives me an error code: 0x800705b4.
I don't know how to fix this, I have been looking for this error code in the gigant sea of the Internet but nothing. I'm growing tired of Windows 10 Mountains of Bugs. I know it's still not finish and it's never ever gonna be finish, but this is just too much, adding that I'm with the people who cannot download/update apps from the Store and cannot open the Mail/Calendar/OneNote apps.
For some reason Windows 10 keeps failing to install updates every time, worse yet it won't give an error code .
View 1 RepliesI'm having this issue on a Store purchased Toshiba Satellite Pro which had Windows 7 Home Prem. I followed all the upgrade instructions and it all looks good except it's not activated. Product key blocked. Error code: 0xC004C003
View 9 RepliesGetting this Error code: 0xC004F034 after upgrade to windows 10?
View 9 RepliesI upgraded from 8.1 on Dell XPS 8700 and the download and installation completed flawlessly. I did a winver and it shows Windows 10 Build 10240.
However, it will not validate, showing the error : "The filename, directory name, or volume label syntax is incorrect. (Error code: 0x8007007B)"
I also ran software that returned the following information.
"Windows Product Key Information
Product Name: Windows 10 Home
Product ID: 00326-30000-00001-AA668
Installed Key: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99
OEM Key: *****-*****-*****-*****-HFQ2D
OEM Edition: Win 8.1 RTM Core OEM:DM
What am I missing? Or is it really a Windows Activation Server Issue? OS is great, everything works fine with it.
There is an update available for windows update. But when i try windows shows no updates found with an error code 8024402F ... Why am I not getting an update for Windows 10?
View 1 RepliesI have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 RepliesAt one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:
Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition
I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.
I can get Steam to launch, but only after having the PC be in sleep mode. I can't get Steam to start with Windows 10 either. I've uninstalled, reinstalled, deleted the blob files and various other things several times. No clue what the issue is.
View 7 RepliesI have a laptop that I took the HDD out of and connected it to another Windows 10 machine.
I ran the command
Dism /Image:e: /Cleanup-Image /RestoreHealth
But get the error
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
Error: 87
The cleanup-image option is unknown.
For more information, refer to by running DISM.exe /?.
The DISM log file can be found at C:WindowsLogsDISMdism.log
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 RepliesNVIDIA driver update for NVIDIA GeForce GT 620 fails to update in Windows 10 - Error 0x80070002 - After upgrading, I lost my 2nd monitor.
View 2 RepliesI have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
Mastercook 15 not Compatible Windows 10 ver 1511 bld 10586.11 ... Since update Mastercook 15 fails to print. Windows error and program shuts down. Contacted Mastercook support and this is apparently a windows compatibility problem now. Note when using Mastercook 11 when trying to print receive error can't locate print drivers.
View 4 Replieshow to solve this error, I have an asus p8z77-v lk mother board and an intel i7 32 bit processor. Windows10 seems to complete the installation then exits with the error "Does not support the processor configuration. error # '0xc1900101-0x30017' It then reverts back to win7.
View 1 RepliesAfter I uninstalled catalyst control centre (because I was having problems with it). When I restarted my mouse and keyboard weren't working. So I tried a ps2 kb and mouse and this worked. I went to device manager a looked at the USB devices, all of them had a yellow warning sign next to the devices. I checked each one and they all had error 39 (missing or corrupted drivers). I tried updating and uninstalling the devices with no avail. How can I fix this?
View 1 RepliesI upgraded to W10 a few weeks ago from W7. All went well.
Then 2 days ago i got the windows error code oxc000021a, and the computer wouldn't start. Couldn't get into safe mode, and repair didn't work either. Really annoying. I've had to reinstall windows 7. I can still see my windows 10 old install saved under windows.old.
I don't have any option yet to re-upgrade to W10, despite putting all the updates on W7 again. What can I do to get W10 again and recover my data from windows.old?