I was activated before the th2 update. Even after I installed it. Today, I just did a reboot, and I login and now it says I'm no longer activated?It gives me a big error in red saying "Windows can't activate right now. Try activating later. If that doesn't work contact support. Error 0xC004F012".
View 2 Replies
It all started out with problems with activation and windows update, so whatever .
A couple of days ago, I suddenly had a watermark in the bottom right corner of my screen saying that I should activate windows. I have a legit copy of windows and had it registered before when I installed it (about 5 months ago) and had no problems until now. When I go to the activation window and attempt to re-register, I get this message: "Windows can't activate right now. Try activating again later. If that doesn't work, contact support. Error code: 0xC004F012"
After trying this during different times of the day for about a week, I started checking other stuff and found another quite big problem: I can't start Windows Update.
The service is set to "disabled" and when I change it to anything but this, it automatically changes back after around 30 seconds. Up until now, Windows Update never had any problems and ran regularily. So then I started googling this problem and found some solutions, all of which do not work:
I tried resetting the Windows Update ([URL]), but that didn't work either, since it coulnd't complete every step. It failed when running "sfc /scannow" at around 15%.
So I searched for solutions to that problem and found this: [URL]....
Checkdisk worked fine, but then I noticed another problem, I can't even run DISM to fix stuff. Attempting to run "Dism /Online /Cleanup-Image /RestoreHealth" returned an error, saying that the remote procedure call failed...
Here is my sfc log: [URL]....
and here my dism log: [URL]....
Short version: suddenly windows is no longer activated, windows update can't be started, sfc and dism fail... I would love a solution that does not require me to completely reinstall windows!
Here are my specs:
I have a Lenovo G700 ([URL]) with an i5-3230M @2.60GHz and a Geforce GT 720M (the rest wasn't configurable). My OS is Windows 10 Pro N x64, version 1511, build 10586.11.
I no longer have a Windows update app to check for updates as I typically do. When I type in 'Windows Update' in the Search the web and Windows, the App always popped up for me to select it to check updates. It is no longer there? Using Windows 10 Pro 64bit, desktop, fresh install I did about a month ago.
View 7 RepliesSO I upgraded to win 10, then wiped and did a clean install of win 10 again.. verifying that it was activated. a couple days later my motherboard took a dive, so I ordered a new one with a new CPU. Now windows is no longer activated... will MS allow me to activate it again or do I need to buy in now?
View 1 RepliesAt one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:
Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition
I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.
i just upgraded my original Windows 8.1 to Windows 10, and when i try to activate it, Windows gives me an error
"Windows cannot be activated, please try again later"
How can i solve this?
I had windows 10 activated on my mac (via bootcamp), then I completely deleted the bootcamp partition (to expand it) and reinstalled win 10. Once installed, Windows automatically activated citing "digital entitlement".
View 2 RepliesI upgraded my Windows 7 to Windows 10 using the windows updater. After windows 10 was installed, I decided to download this Windows 10 and chose the USB option. I booted into my USB and when selecting the partition, I deleted every partition that was there (even the system). Now I am on windows 10 with no activation. I have the Windows 7 product key but it does not work.
P.S its not pirated Windows 7. I got it from Dream spark (on the hub) students saving.
I restored my system back a few days because my OS just started falling to pieces with errors. That issue is fixed, but now my windows isn't activated anymore. I have had no hardware changes, since i upgrades from windows 7 except changing the driver for my Ethernet adapter. My error reads Error code: 0xC004C003
View 9 RepliesSo a few months back I upgraded for free from win7 to win10 Pro. Today I got a new CPU, RAM, MBO (also currently using the new MBO onboard GPU, waiting for my new one) and did a clean install of Win10 (from USB created with MediaCreationToolkit). Now I remember reading somewhere about steps to activate Windows 10 after hardware change, but can't seem to find it anywhere, so thought I'd ask here.The error I'm getting: 0x004C003 The activation server determined the specified product key is blocked.The thing is I need to get this PC up to my needs fast, and this doesn't cope well with that..
View 3 RepliesI'm having issues with deploying out-of the box windows 10 on a Lenovo B50-80EW preinstalled win 7 pro and upgradable to win 8.1 Pro however since the new windows 10 update build 1511 ISO I download I thought it would go through OK . without have to do first upgrade install to windows 10
Secure BOOT on UEFI ON
From putting the windows 10 ISO in drive it doesn't prompt for activation key. As soon as network settings prompts I press shift/ Contro / F3
Now in administrator Mode I check windows is activated however I have the same model of laptop and I want to mass deploy an image but want to use the OEM key embedded in BIOS to each laptop of this model is this possible to be done as I deployed on another machine and got message saying this key is already in use is there an issue with the new ISO available from Microsoft .
I also tried fresh install with out no ethernet or wireless connected and still get on same machine windows is activated in audit mode on fresh setup.
Not sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page.
I, for one, am happy about this change, since those "Definition Update for Windows Defender - KB2267602" were clogging up the update history page.
I'm trying to intstall updates for Windows 7 in Control Panel/Check for updates/Install Updates, but Upgrade to Windows 10 is on screen and I can't seem to proceed without the update. I already tried it and I don't like it so backed out. I don't want to upgrade and want it off of my computer. How do I remove it and all the components associated with it? I only use it for personal use, email, Facebook, a few games, etc. and not for business. 10 was too confusing and there's no one over my shoulder teaching me a new system and where all my stuff went.
View 1 Repliesi am scared enough about the automatic updates that i turn off the update service
View 9 RepliesI've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?
View 6 RepliesAfter a series of updates, one of which must have been at issue, ALL of my conversion software applications now fail to /convert/ any files. The programs load properly but that is followed by various issues depending on the app.
Tipard will load, load video files, and start to convert... but immediately fail upon starting the conversion process.
Handbrake will load, but locks up on loading a file, any file, regardless of length, at the 20% mark.
MakeMKV won't load at all.
VLC randomly crashes, or refuses to play videos, music, or anything, after an undetermined amount of time.
My FTP software no longer loads its settings files and scripts.
And an annoyance, all of a sudden all my icons have little green check marks on them.
Windows 10 Professional x64
Version 1511
Build 10586.63
AMD FX 9590 X8 4.7
32 GB ram
Tipard Blu-Ray Converter Version 7.3.30. No message just an icon notice. See photo
handbrake 0.10.3.0 x64: Preset Export Failed. Unable to load in Presets. Please restart HandBrake No additional exception information available : upon startup. Added files freeze program at 20% mark
MakeMKV (What version, won't load at all)
Paint won't save any files anymore. See same photo
I have and Alienware laptop which automatically updated last night. I woke up and turned it on and it tells me my PC has been updated. When it comes all the way on everything is back to normal until i go to listen to music. This is when i realized no sound is working. I plug in my headphones and sure enough, it starts to work, but when i unplug them it does not work. I've gone through all the settings and stuff and i cant figure out what the problem is.
View 1 RepliesI've recently downloaded Microsoft's Windows 10 update and ever since i'm having issues with my computer. First, I'm pretty sure the update made my computer crash because 2 days after the update, my OS completely shut down and i lost everything on my drives. I then reformatted it and installed back windows 8.1. However, I can't connect to internet since the crash, even though im connected via Ethernet. It says IPv6 has no internet connection and IPv4 just started to have the same problem. I tried to reset winsock entrie and tcp/ip stacks, but in vain. I also tried set google's open dns address, but no success there either.
Here's my ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : TheBeast
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
I am having trouble accessing MS app store and also updating office 2016 through any of the office applications.
My question is, will win 10 apps and office 2016 default update through windows update?
After a recent update I can no longer use the photo viewer, the tile does not respond and nothing happens when I pop my SD card in. I used it with no problems on windows 8.1. I have tried various settings using auto play to no avail.
View 1 RepliesMy numeric keypad no longer works with the update. I had to manually remove the ELAN keyboard in order to get my letters and top row numbers working, but the keypad still isn't working. I also had to remove the touchpad software the updated with in order to get the touchpad working. How do I get the numeric keypad on the right to work again? I have an ASUS U57A.
View 2 RepliesAfter an cumulative update the icons of the modern applications took a square of the color of my theme and are no longer monochromatic ... And some apps do not show the name on the Live Tile as well...
View 6 RepliesAfter a recent Windows 10 update on my laptop and my work computer the date no longer shows on the taskbar. The clock is visible and the calendar pops up when you click on it, but no date. No settings were changed by me and everything is enabled as far as I can tell. Is this just some sort of glitch or is there something I am missing to bring the date back?
View 3 RepliesI tried that Windows 10 registry fix, and my laptop no longer recognizes my password. It keeps saying my password is incorrect. I got the update error on both of my laptops, but I tried the registry fix on an older laptop before I tried to fix it on my main laptop. My laptop starts fine and I get to the log in screen okay, but my password is no longer being recognized as correct. Did I destroy my laptop? I followed the directions exactly.
View 6 RepliesI'm currently running build 9926, and my computer keeps getting this message "Install a new build of Windows now" "This build of windows has expired, so your PC will restart every few hours, and eventually will fail to start. Go online for more information."
So I've tried installing the following ISO [URL] but I'm not sure how to properly install a new build of windows 10.
Received an update notification in Windows 10 update screen.
When I press the INSTALL NOW button, the spinning circle appears and says in motion without starting the install.
I have minimized the window and also checked the task bar. Still the install does not take place.
