Updates :: Windows Update Multiple Install Errors / Failure (error 0x80070643)
Sep 6, 2015
I have upgraded to windows 10 for a few weeks now and over the last couple of days it has stopped installing any windows updates, the error code that pops up is (error 0x80070643)
It's also stopping me from installing some other programs but not all.
I have tried restarting the computer, Nothing I've tried restarting wuauserv service, Nothing I've tried the troubleshooter for windows update, it says problems were found and they were fixed. I have also cleared the cache for update downloads from the following folder: C:WindowsSoftwareDistributionDownload
In the Windows update page it seems to take forever to install the updates and then throws out the following:
There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information:
Security Update for Microsoft ASP.NET MVC 4.0 (KB2993928) - Error 0x80070643
Security Update for Microsoft Silverlight (KB3080333) - Error 0x80070643
Security Update for SQL Server 2008 R2 Service Pack 2 (KB3045313) - Error 0x80070643
Update for Microsoft Visual Studio 2010 Tools for Office Runtime (KB3001652) - Error 0x80070643
Note: this is after clearing the cache in the above folder location.
View 6 Replies
Similar Messages:
Sep 22, 2015
Have had this error for a couple days now. Tried regular checks to verify system components and online image and windows update service diagnostics, cleaned up SoftwareDistribution, turned off non-Microsoft auto starting services, - all to no avail.
Also, ran netfxsetupverifier, which gave me the only error - aspnet.mof missing, which I presume is OK.
View 2 Replies
Dec 11, 2015
Basically I just got windows 10 and i noticed a windows update i tried it 3 times before restarting my computer and the update kept giving me this ...
Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063) - Error 0x80070643
View 1 Replies
Feb 9, 2016
I recently built a computer about two weeks ago. Everything had been great up until today. These are the following error messages that occur about 10 seconds after seeing the windows 10 desktop and all the way until the starting of windows.
Bad pool caller
Bad pool header
System service header
Dpc watchdog violation
Kmode exception... (I couldn't get the rest)
I have about 10 seconds of desktop before a error message or a freeze. I've tried safe mode and it locks up, ive tried trying to repair windows from the boot disk and it loads forever or locks up. Maybe the two week old hardrive has failed?
View 1 Replies
Sep 9, 2015
Everytime I try update my windows 10 it gives this error.... I've searched google and all i see is ads for tech utilities...
View 9 Replies
Nov 29, 2015
When I run Windows Update on Windows 10 (ver 1511), I get the following error:
Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series - Error 0x800f020b
I looked up the 0x800f020b error code and it says this occurs when an attempt is made to update drivers for a device that isn't connected. In my particular case, this device is connected via the wireless network and appears in my list of available Printers.
How do I get rid of this error?
View 1 Replies
Sep 16, 2015
When I try to download and install my two updates ( Cumulative Update for Windows 10 for x64-based Systems (KB3081455) and Update for Windows 10 for x64-based Systems (KB3081452) ) I get the error code 0x80070246 for both of them.
I tried simple things like restarting, using the troubleshooting to solve any issues, I downloaded the file named WindowsUpdateDiagnostic and run that too with no success.
I figured that it might be a problem with GlobalInstallOrder.xml like the one described here [URL] .... but I couldn't apply the solution, maybe because of the different OS.
I also downloaded the standalone updates and tried to install them but I get an error every time.So now I'm stuck.solutions that don't include refreshing or formatting as there are a ton of apps that I will have to manually install.
I have an Acer 5942G, 8 Gigs of ram, a 256 Gb Crucial SSD, i7 720 QM and a 5650m.Windows are x64.
View 9 Replies
Nov 25, 2015
How to install Windows update in safe mode?
View 3 Replies
Aug 15, 2015
The latest Win 10 update (from about 8/12) has really hosed me. Every morning the computer tries to install it, fails, and then removes the update. No error codes. This take about six reboots and half an hour. Never ran into this before. I'm about to roll back to Win 7 if I can't resolve this.
I tried the trick of setting "metered connection" in the Wi-Fi settings, but that did no good, apparently because the update is already stored on my machine...
View 6 Replies
Oct 12, 2015
Every time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 Replies
Aug 7, 2015
I'm having this issue on a Store purchased Toshiba Satellite Pro which had Windows 7 Home Prem. I followed all the upgrade instructions and it all looks good except it's not activated. Product key blocked. Error code: 0xC004C003
View 9 Replies
Sep 12, 2015
I cannot install anything from Windows Store. It will down load normally & then fail with error 80073DOA. Updates to Apps also fail to install with the same error. I have run wreset ( several times) but still no joy. Date & Time Zone are correct.
Windows Firewall must be enabled to allow the Store to Update & Install!
Found this by accident. I was running the Firewall that came with Norton Security. Why this is a requirement I don't know. Disabling the Norton Firewall was easy but there was no option to turn the windows Firewall back on as Norton had taken over so I went into Services & did it from there. All working fine now ))
View 7 Replies
Sep 10, 2015
I bought windows 10. I was wondering if i can install that windows on multiple PCs? I know this was probably answered but i couldnt find it.
View 1 Replies
Sep 18, 2015
I've run the free Windows 10 upgrade twice on my Windows 8.1 laptop. Both times, Windows 10 would download. As my system restarted the install would take place and system finishes restarting. However, upon hitting the splash screen, I was back to Windows 8.1. Not sure why the install is failing. Each time, I receive a failure in the Windows Update popup. Did not have this problem on my desktop going from Windows 7 to 10.
View 2 Replies
Jan 19, 2016
I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram.
Windows 10 is a fresh purchase and install downloaded direct from MS.
The Nuc worked fine with both the HD and Ram being recognised and W10 installed fine. I loaded the drivers from the Nuc support page and then updated Windows. Everything still fine. Then I proceeded to install other programs and went to bed.
Next morning the PC had crashed and failed to restart. After searching the net for possible cause I decided to reinstall Windows 10. This time i didn't load any drivers and the PC was NOT able to connect to the Internet because I thought one of the updates may have cased the crash.
PC was still unstable and crashed often to the point it was in a BSOD loop. I then reinstalled Windows 10 again and this time I installed the LAN driver only and Windows 10 updated itself. It stayed on for 12 hours and has now gone into a BSOD loop again.
The BSOD error message changes but the main ones seem to be
Memory_Management
irql_not_less_or_equal
0xc000021a
Throughout this process I have:
Run Memtest86 for approx 20hrs with no errors
Performed a disk check
Installed samsung magician to confirm HD firmware is the current version
Updated the BIOS to current version
View 9 Replies
Jan 13, 2016
I have an SSD for boot and League of Legends(OCZ VERTEX 4) and an 2TB HDD that I store everything else on. I have had Windows 10 since the officla release and have had zero issues, then one day I had a memory leak with some program so I figured that a quick reset sould fix the issue (full reinstall). After the reinstall it did not update correctly and corrupted the files essentially forcing a complete wipe, which means I had to reinstall my old Windows 8.1 install and then redownload Windows 10 again, which I did. The computer would work for 24 hours then some error would occur, I have seen every error from updates breaking to the boot files corrupting over the past 2 weeks.
I have wiped/fresh installed on the drive at least 10 times in the past 2 weeks. This past week I was able to get a Windows 7 disk to install and update without a hitch and it worked up until tonight when it failed just like my Windows 10 installs. My question here is, is it my SSD that is failing (it is 2 years old) or is it my motherboard/SATA ports failing? I have tried multiple different ports but it does not make a difference. I would like some opinions before i drop a buncho money on a new SSD if that is the issue. I have never had so many Windows failures before.
View 1 Replies
Mar 5, 2016
Windows 10 Pro 64-bit
Nvidia GTX 570
ASUS P8Z77-V
Intel i7-3770k 3.50 GHz
Starting Monday (I think) I started getting artifacts all over my screen then my computer would crash and restart (sometimes the artifacts would persist during the boot screens, which would force multiple restarts before I could even log into Windows). I was not in any situation with heavy loads on either the CPU or GPU. This happened multiple times. Eventually, it started giving me a BSOD and one of these three codes: "DCP WATCHDOG VIOLATION", "TRD VIDEO FAILURE", or "DRIVER IRQL NOT LESS OR EQUAL". Of all the dumps I got, the consensus from WhoCrashed is that it's the Nvidia kernel driver nvlddmkm.sys (in some cases it was dxgmms2.sys). My drivers were up to date at that point.
Two days ago I was told by the Nvidia chat "support" to use Revouninstaller and roll back my drivers to those from December, which I did. It took a lot longer, and it didn't actually crash, but I got artifacts again, the screen froze then flickered and came back, and then an error message came up saying that my Nvidia kernel driver had stopped working and recovered. At that point, I turned off for the night and went to bed. Yesterday I was able to use my computer for several hours without any problems, but just as I was about to turn in, it artifacted and crashed with a BSOD and one of those three codes above (can't remember which).
I ran a full scan using Windows Defender. It got about halfway done, then stopped. I couldn't start it again (gave error 0x8007139f). After a restart it would scan, but I'm convinced it didn't finish again (I was working on my laptop while it was scanning so I wasn't paying complete attention, but what took 30 minutes to get halfway before, "finished" in less than 10 minutes). I'm not convinced it's an infection yet, but I guess it's another things to check for if it turns out WinDef isn't cutting it.
NLGR-2012-Fri_03_04_2016_224348_10.zip
View 7 Replies
Jan 5, 2016
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
View 9 Replies
Oct 29, 2015
I've been getting a lot of BSOD errors recently but always within a minute or so from starting my computer up from sleep. The messages seem random, but one time I noticed graphical glitches before the BSOD so I have a suspicion that it may be related to the graphics card/drivers. If it doesn't crash within the first few minutes, it seems to be fine.
View 1 Replies
Oct 2, 2015
I know it says to install and run the program in the sticky but i can't get into windows
PC has been running fine until recently. I have been getting occasional random BSOD errors over the last few days which I didn't think much about, but today I started getting a lot of them, occurring a few minutes after boot. After a few restarts I then started getting a black screen with cursor when the login screen should appear. The jingle still sounds. Some of the BSOD errors I wrote down.
Bad pool header
PFN corrupt
Memory management
0xc000021a
The black screen will not respond to CTRL ALT DEL etc. I tried following steps on some posts to enter password blind by pressing space /ctrl but this does not work for me. The screen stays on indefinitely.
I have also tried chkdsk on C drive. No errors. I tried system restore, but it says I have no checkpoints. I thought I did have it switched on but I guess not.
I tried start up repair but it says it cannot fix the problem. I don't have a system image either (I know, I'm a fool). I tried safe mode and low res mode. Same black screen just with a larger cursor.
Apart from reinstalling windows again, i can't think of any other things to try.
View 9 Replies
Nov 2, 2015
I am having trouble accessing MS app store and also updating office 2016 through any of the office applications.
My question is, will win 10 apps and office 2016 default update through windows update?
View 3 Replies
Oct 17, 2015
Today I had to do a reinstall to fix some things (it didn't fix them lol) so now I'm stuck. Windows 10 will not update. I get the error code 0x80240442 after a while. I'm not sure if its an issue with my drivers not being updated, but all of the web pages I have found that have this error code won't open. Not even the Microsoft pages, including hotmail.
View 1 Replies
Aug 16, 2015
I have upgrade to windows 10 everthing works fine. But when i have updates the always donwnloading and stops around 81 % so the updates fails.
View 1 Replies
Jan 16, 2016
This the first time am having an issues with the update center.the rest of updates from today (Office 16) were fine.Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.the only way to get rid of it (after 30 min) is to press the RESET button.
Tried sfc /scannow => CBS.Log
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
[code]....
View 4 Replies
Dec 22, 2015
My test computer (specs follow) is stuck at build 10586.11 I cannot install any cumulative upgrade, they all fail and Windows Update undoes any change to the system. In order to be able to install any other update I have to use the show/hide tool to hide the cumulative updates. My main computer (see my specs) and several of my friends have no problem upgrading up to 10586.36, but this particular one fails for some reason. I already tried to disable some devices in Device Manager and disable some services and startup applications, nothing worked.
Specs of my test computer that has the issue:
Computer: Custom-build server system
Motherboard: Supermicro PDSG4 (Intel socket 775)
Chipset: Intel Glenwood 955X (supports up to Pentium D dual-core CPU socket 775, not newer models)
CPU: Intel Pentium D 945 3.40GHz dual-core socket 775
RAM: 4GB DDR2 667MHz (4x 1GB modules in dual channel mode)
Graphics: XFX GeForce 7300GS
SATA Controller: Intel ICH7R with RAID support
SCSI Controllers: Adaptec 7901 Single channel Ultra 320 SCSI & Adaptec SCSI RAID 20105/Supermicro AOC-LPZCR supported
LAN: Intel 82573V PCI-E Gigabit Ethernet Controller
Audio: Realtek AC'97 audio high quality 6-channel sound
OS: Windows 10 Pro TH2 build 10586.11 32-bit English US
I have already hidden the Realtek AC'97 audio driver update which is known to cause BSOD, so this is not causing the issue.
View 8 Replies
Aug 12, 2015
Just found myself diggin' more and more in bugs and troubles in Windows 10. Now, when I'm looking for updates with Windows Update it shows me that the Updates cannot install and to check it out later, and then gives me an error code: 0x800705b4.
I don't know how to fix this, I have been looking for this error code in the gigant sea of the Internet but nothing. I'm growing tired of Windows 10 Mountains of Bugs. I know it's still not finish and it's never ever gonna be finish, but this is just too much, adding that I'm with the people who cannot download/update apps from the Store and cannot open the Mail/Calendar/OneNote apps.
View 5 Replies
