I am wondering if Windows 10 will automatically create restore points before installing forced updates. If not, will we be notified about these updates before hand so we can make restore points manually? In previous editions of Windows, we were often offered optional or recommended updates. Will such updates be forced or not offered any more?
View 1 RepliesThe fall update removes all restore points - cannot restore to prior to update.Also, it turns off protection settings in CP/System Protection/Configure. You will have to press button to turn on system protection and assign disk space for restore points. after Fall Update completes and create an initial restore point.
View 3 RepliesSome earlier automatic Windows 10 updates removed all my earlier restore points and set the protection settings of the C: disk off.
The recent Windows 10 update (Jan 29) again removed all my earlier restore points. This time the protection setting of my C: disk was still on, but the settings of the disk space usage was set so low by the update that there was space only for one restore point (the critical update).
i am scared enough about the automatic updates that i turn off the update service
View 9 RepliesWhat is the identification number of the last Windows 10 automatic update?
My installation of Windows 10 was done August 14.
The last automatic update I received was KB25533437 on August 15.
If you don't want windows 10 to automatically install updates, open the Services desktop app. Scroll down until you come to the service: Windows update (Enables the detection, download and installation of updates for Windows and other programs.) Double click on it. From the new box select Start up type and change from Automatic to Disabled. Windows will no longer automatically install updates on you computer. When you want to install updates yourself, Go back to the windows update service and change the startup type back to automatic...
View 1 Replieson a no-problem notebook of a Relative, win ran an update last night at 4 and came up with this:Most App-Links are gone, Apps still there.But Firefox, Outlook and others seem completely reset as if freshly installed, no accounts set f.e.Win demands hardware driver installation for Wifi.And a bunch of personal files on the Desktop are gone.
View 1 Replies1) I disabled Windows Update in Services to avoid having to deal with the updates. Later I put it on "manual" instead of "disabled". Today I find that my computer is "installing updates" WITHOUT a) my permission and b) without notifying me that there were updates to install. This thrashed my hard drive with near constant 100% usage from something called Windows Modules Installer Worker. I killed the process, rebooted after some Adobe Reader issue (unrelated....I think). Upon selecting "restart" Windows informs me that it is updating my system WITHOUT my permission. It continues, updates, says finished, restarts to 0%, finishes, reboots.
Upon restart--which takes FOREVER by the way without the "updating" message, when it used to only take a few seconds to boot up--I go to Services where I find Windows Update is set on "running". Even though I manually stopped it, and set it to "manual trigger" start....
2) After restart when I am in Services to kill Windows Update and set to manual--again--I see something called Update Agent, set to run automatically. I do not remember this service from before, and what it does different from Windows Update. I set it on manual as well.
What does Update Agent do differently from Windows Update? They are listed as separate services
What happened to make my computer update without my consent??
Is there an application, freeware or paid, that works in creating restore points in Windows 10, so if an installed application messes things up, I can restore the saved point, so Windows 10 loads as if the application was never installed in the first place, and Windows registry etc is restored to as it was BEFORE the application was installed?
View 9 RepliesI find that the oldest restore points regularly disappear even though I have system recovery on and more than adequate disc space allocated.
View 9 RepliesI've turned on windows restore. I have an ssd as my C drive and thus don't want to burden this drive with restore points. I can't, however, find where to set windows 10 to store the restore points.
View 4 RepliesI have never had many restore points on my 2-in-1 Tablet, presumably to do with the small size of the SSD. But recently I have found the couple or so I normally have, disappear every day. I have been having to replace them every few hours. Why is this and what can I do about it?
It does not seem to be anything to do with the configuration in the Protection configuration menu --- it has not been changed, and there are several GBs of space allocated. Even so, is it to do with the fact that the free space on my C drive is low and frequently drops lower? OR what?
So far I only received a restore point for when I installed a LAN driver and when I make them manually. Why can't it create more like it used to?
View 4 RepliesI usually see the restore points created by windows but it isn't everyday backup, so I want to do a daily restore point backups, I went to Task Scheduler >> Windows>>System Restore, there is a task already there, I changed it to be daily at 4am, and It's enabled.
I check everyday in history and I see that the job is successfully done, but if I go to restore points I don't see any of those backups except the ones which Windows creates randomly or after installations.
Is there a downside to creating Restore Points (other than the disk space needed)?
View 3 RepliesQuestion; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
View 9 RepliesRecently I was notified that a driver installation failed. I went and checked it out, and it was a driver for HD 4600 graphics. My old system ran an i7-4790K, and when I upgraded to X99 I did not reimage my SSD.
Is there a way I can remove an update from Windows Update? The CPU I have has no iGPU, let alone HD 4600.
Today I had to do a reinstall to fix some things (it didn't fix them lol) so now I'm stuck. Windows 10 will not update. I get the error code 0x80240442 after a while. I'm not sure if its an issue with my drivers not being updated, but all of the web pages I have found that have this error code won't open. Not even the Microsoft pages, including hotmail.
View 1 RepliesI have upgrade to windows 10 everthing works fine. But when i have updates the always donwnloading and stops around 81 % so the updates fails.
View 1 RepliesThis the first time am having an issues with the update center.the rest of updates from today (Office 16) were fine.Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.the only way to get rid of it (after 30 min) is to press the RESET button.
Tried sfc /scannow => CBS.Log
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
[code]....
My test computer (specs follow) is stuck at build 10586.11 I cannot install any cumulative upgrade, they all fail and Windows Update undoes any change to the system. In order to be able to install any other update I have to use the show/hide tool to hide the cumulative updates. My main computer (see my specs) and several of my friends have no problem upgrading up to 10586.36, but this particular one fails for some reason. I already tried to disable some devices in Device Manager and disable some services and startup applications, nothing worked.
Specs of my test computer that has the issue:
Computer: Custom-build server system
Motherboard: Supermicro PDSG4 (Intel socket 775)
Chipset: Intel Glenwood 955X (supports up to Pentium D dual-core CPU socket 775, not newer models)
CPU: Intel Pentium D 945 3.40GHz dual-core socket 775
RAM: 4GB DDR2 667MHz (4x 1GB modules in dual channel mode)
Graphics: XFX GeForce 7300GS
SATA Controller: Intel ICH7R with RAID support
SCSI Controllers: Adaptec 7901 Single channel Ultra 320 SCSI & Adaptec SCSI RAID 20105/Supermicro AOC-LPZCR supported
LAN: Intel 82573V PCI-E Gigabit Ethernet Controller
Audio: Realtek AC'97 audio high quality 6-channel sound
OS: Windows 10 Pro TH2 build 10586.11 32-bit English US
I have already hidden the Realtek AC'97 audio driver update which is known to cause BSOD, so this is not causing the issue.
How to install Windows update in safe mode?
View 3 RepliesI have set group policy to notify for update and notify for download, so when I manually check for updates, it shows any that are available, however when there are multiple updates available, there is no option to download/install an individual one, it just downloads / installs all of them?
Is there a way around this, as there is no point of the manual setting if it downloads /installs all of them at once anyway?
how to install manually a patch which seems to be quite essential to upgrade my 16gb tablet to the 1511 build of windows 10:
the patch is KB3124260 and I downloaded manually the .cab file from the official support site, but I have no experience about this, and no clue on how to install it. Is there any tool or script available?
So on RTM build, you used to have these options:
But now, in TH2, you only have this:
Is it going to be like this every single update? If so, I'm done with Windows 10.
I checked my available updates this morning to find that Windows 10 has downloaded and wants to install the "latest" video driver for my Radeon 7700.
I have used AMD Auto Detect and it tells me I have the latest driver (15.7.1)
I have used the instructions on this web site to disable automatic driver updates.
what is this driver? I have read before that Microsoft sometimes tries to download and install drivers that have already been installed or are already up-to-date.