Updates :: Can't Download And Install Upgrades
Dec 14, 2015
I recently bought a HP Envy 17t with Windows 10 64 Bit on it. The first thing I did was to check if any updates were available, there were, and I downloaded and installed them. I checked again about 10 after that (about 2 weeks after getting the laptop). Since then however I can't install any upgrades. I start the download/install process, then leave. When I get back a couple of hours later, I see an error message saying that the MS servers could not be reached.
I don't know what's going on here. I haven't been able to download and install any Windows or MS Office upgrades in over 4 weeks.
View 1 Replies
Similar Messages:
Jan 7, 2016
I've been reading in the tutorials how to relocate the user folders and what you need to do in order to upgrade the system. As I have my user and programs folders in another partition (which I consider is the best way due to the malfunction of windows OSs) some updates and upgrades cannot install. From my point of view I find it quite disappointing, windows 10 is supposed to better than older windows, and apparently they do not consider that nowadays hard drives are around GB or TB and a lot of the users move the users and program folder due to security.
So at this point, I wonder if there's another way to say to windows or windows update that my folders are in another partition, like creating a kind of link that redirects windows update where it should. When windows update enters in C to look for users files, could it be posible to redirect it to the correct path (D: for example) and avoiding to relocate all the users files again to C.
View 1 Replies
Jan 17, 2016
When using windows update for Windows 10 the update will find updates but will not completely download or install. Version 1511 does not show up to download either. I have been on original version of Win 10 for several months.
View 2 Replies
Sep 10, 2015
I've run the troubleshooter, but still my nicely functioning Windows 10 has one kink -- daily updates download, but then during the required restart, the installation fails and the update is not operational. The restarts take forever, sometimes rolling through the restart process 3 times, before the failure message appears. Win 10 and the computer continue to function well, but without the daily updates, that won't last.
View 3 Replies
Sep 28, 2015
I have my settings configured to automatically download and install Windows updates, yet every single day I have to manually check for updates and there are always updates found, which then proceed to be installed. Why is this? By very definition, shouldn't "automatic updates" mean that nothing should be found when manually checking for them? Yet this is a daily occurrence.
View 2 Replies
Aug 13, 2015
The Update Troubleshooter detects that I have these optional updates These updates are in the "optional updates" section on Windows 8.1/8/7
but then I have no way of updating them because the native Windows Update doesn't allow me to choose the updates that I want.
I have no way to select those updates in Windows Update because it only shows the Critical Updates.
View 2 Replies
Aug 14, 2015
how to reactivate my copy of Windows 10 if I make hardware upgrades that would make me need to format my hard drive (Motherboard, CPU, etc.). In other words say if I need a new motherboard down the road and once it is installed and I cannot boot into windows, how would I get my copy of windows 10 back after I format all the old drivers and such off and reinstall windows? Would I have to then buy a whole new copy? The only thing I could think of would install my version of windows 7, activate it, then upgrade back up to 10.
View 1 Replies
Oct 16, 2015
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
View 9 Replies
Jan 5, 2016
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
View 9 Replies
Nov 14, 2015
I got home from work this morning and cracked open this laptop to update it, and at about the same time I went to PC via RC and started the update as well. I let both download and went to take a nap, after waking up I checked laptop and it was still downloading at about 85%, then checked the PC and it had already updated, so went thru setup and looks fine.
I had some late lunch and watched the download going to browse web for a bit, came back and at 94%, closed up laptop had company, after they left reopen laptop and after a bit checked and still at 94%, that was two hours ago and still nothing, I even shut down and restart and doesn't move.
View 4 Replies
Jan 25, 2016
so, my computer has been trying to download the november 11th update of windows 10 and I cant figure out why its staying stuck at 0%. How to force the update or why its staying stuck at 0%? anything I can do?
View 2 Replies
Sep 19, 2015
Every time I go to windows update Windows 10 stars downloading, how can I stop this. I don't want Windows 10. I've hidden KB3035583, under optional updates I've unchecked the box update to windows pro and hidden it but it still downloads when I go to windows update. How can I stop this?
View 1 Replies
Jan 15, 2016
I have minimal data per month, how do I find out how large the windows updates are? I have had windows 10 for four months and have run out of data allowance in three of those months, now I have another update about to happen and I cannot turn it off and I do need to turn off my laptop.
View 3 Replies
Sep 24, 2015
The other day I connected a TomTom satnav to a usb port to check it for problems for a friend.
The next day Win10 reported an update for TomTom was ready to download and install.
There does not appear to be any way to stop this happening.
How I can stop the download and install of this.
View 5 Replies
Sep 26, 2015
I just upgraded my HP Envy dv7 series laptop from Windows 8.1 to Windows 10 Pro. The download and installation of Windows 10 Pro went just fine. However when I attempted to check for hotfixespatches for Windows 10 after the initial install the process failed to download and install any of the identified updates. I let the process run for 12 hours and still nothing was downloaded and installed.
I have tried to stop the WUAUSERV & BITS services but get "the service is not responding to the control function" error for both services. I have also successfully downloaded the identified patches with a 3rd party tool but when I tried to install a single patch it hung and never installed and after about 10 hours I cancelled the process. I have shutdown the laptop and restarted it hoping I could then get the services to respond to the control function so I could delete the C:windowssoftwaredistribution directory and ideally get the patching process to work but even after the reboot when I tried to stop the WUAUSERV & BITS services I still get "the service is not responding to the control function" error.
I have also checked my NICs to make sure they were not set to metered, but so far I have not been able to get this process to work. I can get out to the Internet and download other updates just fine.
View 1 Replies
Mar 5, 2016
I recently purchased a new HP Pavilion 17" laptop with Windows 10 Home already installed. When I went online the automatic updates began. The download to upgrade to version 1511, 10586 started but stopped at 60%.
How do I get the download to finish the download?
Prior successful downloads and installations include:
Update for Windows 10 x64-based systems (KB3106932) and (KB3135174),
Windows malicious software removal tool (KB890830).
Security Adobe Flash player (KB3135782)
View 2 Replies
Oct 15, 2015
I am upgrading from Windows 7 to a pc but it seems to be stuck looking for updates. should I start again? Well, I am starting over but was wondering if I could do something different to avoid the problem.
View 8 Replies
Aug 13, 2015
Been trying to use Windows Update in Windows 10 since I just installed it a day ago.
When I try to start it, I get this error:
We couldn't get online to download your updates. We'll try again later, or you can check now. If it still doesn't work, make sure you're connected to the Internet.
Tried turning BITS svc on and off
Tried turning windows update svc on and off
Tried turning msiserver svc on and off
Have tried adding windows update to the firewall.
View 1 Replies
Aug 19, 2015
windows 10 updates will not down load and install also i have the same issue with updates from HP status states downloading on the HP page but progress does not move the windows update has been at 0% for 2 days
View 1 Replies
Oct 11, 2015
In Windows in the past you could go to the windows update download site to find the updates. It doesn't seem to work for Windows 10 cumulative updates. Is there a way to find these updates? I have even tried googling the kb numbers and it only gives details but not the file to download. I wanted to test the Wicd tool ability to add in updates to the media.
View 2 Replies
Aug 11, 2015
I wanted to clarify whether updates that require a restart to install, only install if you actually click 'restart' or do they install if you normally shutdown the computer and then turn it on again later?
I'm sure you could do it that way on Windows 7. Its difficult having to restart my laptop every time, I'd rather shut down normally at the end of the day once i'm done with it and then following day upon booting up, updates install.
View 8 Replies
Oct 14, 2015
When I open my Windows Update, the Upgrade to Windows 10 is there ready for me to download. It has a button saying "Get Started". I checked to see what available updates are ready for me and it shows I have about 8 Windows 7 updates to be installed. How do I get around the Upgrade to Windows 10 in order to only install the Windows 7 updates? I am presently holding off in the installation of Windows 10, but I do want to continue updating my Windows 7.
View 4 Replies
Aug 1, 2015
I have windows 8.1 fully licensed. I got the windows 10 app, i completed the reservation, the download started (my internet speed is 54 kbps) so it took quite a while to finish. now the 3rd part that is upgrade..it also says available.So i click on OK, Lets Continue.. a blue circular thing comes and after sometime it says something went wrong, Please try later...
View 2 Replies
Dec 14, 2015
How to download and install Win 10 apps that are zipped.
Can't find simple instructions anywhere.
Photo Filtre is example of app I want that is zipped
PhotoFiltre Studio - Download
View 2 Replies
Aug 7, 2015
Today I tried to install a game from the Windows store and it wont download. I noticed that there were 4 apps trying to update as well, but none of them were moving. When I tried to pause or cancel them, the store would freeze. I restarted my computer which allowed me to pause and cancel, but the apps still down download. Even if its just one at a time. Is it a bug? Is there a workaround?
View 1 Replies
Sep 7, 2015
In Microsoft id does give me a link to download windows 10 64 bit iso but does not let me to choose between home and pro ...
View 1 Replies
