Updates :: Clean Install Not Activated (Hardware Upgraded)
Nov 7, 2015
So a few months back I upgraded for free from win7 to win10 Pro. Today I got a new CPU, RAM, MBO (also currently using the new MBO onboard GPU, waiting for my new one) and did a clean install of Win10 (from USB created with MediaCreationToolkit). Now I remember reading somewhere about steps to activate Windows 10 after hardware change, but can't seem to find it anywhere, so thought I'd ask here.The error I'm getting: 0x004C003 The activation server determined the specified product key is blocked.The thing is I need to get this PC up to my needs fast, and this doesn't cope well with that..
View 3 Replies
Similar Messages:
Jul 29, 2015
I upgraded my Windows 7 to Windows 10 using the windows updater. After windows 10 was installed, I decided to download this Windows 10 and chose the USB option. I booted into my USB and when selecting the partition, I deleted every partition that was there (even the system). Now I am on windows 10 with no activation. I have the Windows 7 product key but it does not work.
P.S its not pirated Windows 7. I got it from Dream spark (on the hub) students saving.
View 9 Replies
Nov 16, 2015
I'm having issues with deploying out-of the box windows 10 on a Lenovo B50-80EW preinstalled win 7 pro and upgradable to win 8.1 Pro however since the new windows 10 update build 1511 ISO I download I thought it would go through OK . without have to do first upgrade install to windows 10
Secure BOOT on UEFI ON
From putting the windows 10 ISO in drive it doesn't prompt for activation key. As soon as network settings prompts I press shift/ Contro / F3
Now in administrator Mode I check windows is activated however I have the same model of laptop and I want to mass deploy an image but want to use the OEM key embedded in BIOS to each laptop of this model is this possible to be done as I deployed on another machine and got message saying this key is already in use is there an issue with the new ISO available from Microsoft .
I also tried fresh install with out no ethernet or wireless connected and still get on same machine windows is activated in audit mode on fresh setup.
View 3 Replies
Aug 28, 2015
Upgraded grand-daughter's pc from 7 to 10. Seemed a bit sluggish running from a spinning HDD so I decided to do a clean install to a SSD using the same USB I had made to upgrade with. Installed just fine but now says the keys don't match and I have to buy a key? Thought the upgrade was tied to your hardware (motherboard/CPU) and a clean install after would be activated?
View 4 Replies
Aug 1, 2015
I successfully upgraded from Win 8.1 to Win 10 (both Pro 64-bit) in PC's old HDD. Now I want do a clean install on a brand new SSD. I have a few questions before I buy the SSD.
1. First off, is it possible to do a clean install of Win 10 in the new SSD especially after I upgraded from Win 8.1 to Win 10 in the old HDD?
2. If 1 is possible, then at any point do I need to enter the Win 10 license key? I have used a Win 10 license key viewing tool to find out what it is.
3. Should I use the Win 10 Media Creation tool to create the ISO or just download an untouched Win 10 Pro 64 bit ISO, burn it to a DVD and do a straightforward install?
4. What happens to the Win 10 in the old HDD? Does it get deactivated on its own?
View 9 Replies
Jan 5, 2016
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
View 9 Replies
Sep 14, 2015
If I understood this : clearly, then does it mean that Windows will activate itself from some Windows activation servers that are somehow written into my hardware even if I do a clean install deleting everything in my Windows partition?
Also, since the built-in "Create a Recovery Drive" will take forever or display an error when ''Backup system files to the recovery drive' is checked", I'm trying to create an Installation media. But I'm stuck with which ISO I should download. Now, there's Windows 10, Windows 10 Single Language, Windows 10 Home, Windows 10 Home N. I'm running Windows 10 Home at the moment. Which was upgraded from Windows 8.1(I think there was ''Single Language'' written after "8.1", not sure though). Which Version should I download. And if I install the wrong version by chance, will Windows still activate after I find out and install the right version? Please clarify these.... I'm really looking forward to do a clean-install to get rid of all the errors and bugs with drivers and just start over.
*DETAILS: Windows 10 Home Build 10240 [Upgraded via free upgrade, had an OEM version of Windows 8.1 when first bought]
View 8 Replies
Oct 23, 2015
I've read the instructions on various websites.
I had Windows 8.1 Home activated and updated.
Upgraded to Windows 10 Home. It activated and updated.
Did a clean install of Windows 10 Home and it won't activate. I skipped both key input screens and it says my key is blocked.
View 8 Replies
Aug 18, 2015
A friend's Asus 8.1 laptop was stuck in an automatic repair loop so I suggested that he upgrade to Windows 10.
Because he was unable to access his system, I opted for a clean install and I created a bootable Win 10 usb on another pc. I used this usb to insall Win 10 on his machine, skipping any requests to activate.
I was under the impression that Win 10 would automatically activate on installation. I'm not sure he ever signed up for the free upgrade offer before Win 8 on his machine decided to implode.
View 5 Replies
Jan 9, 2016
I have a laptop that was originally on Windows 8.1. I upgraded it to Windows 10 recently, however there were a variety of deeply embedded issues. I tried every troubleshooting method I could find, tried to revert back to 8.1, and tried to repair and reset Windows 10. Nothing was working, so I had to use installation media from doing a clean install on my PC to install a fresh version of Windows 10 on my laptop.
I was forced to format the hard drive, and delete all the partitions to even get the clean install to work (the upgrade did a real number on my initial system), and because of this I'm now unable to activate Windows 10. The upgrade was the Home edition, and I clean installed the Home N edition (as far as I'm aware there's little to no difference). I made a note of the product key that was listed in the upgraded 10 before the clean install, which I assume was my product key from 8.1 that carried over, as it is 20 characters long and not 25.
Is there any way I can activate my clean installed Windows 10 Home N in this situation?
View 3 Replies
Sep 18, 2015
Ye old Error code: 0xC004C003
I made sure 8.1 Pro to the upgrade to 10 Pro was activated before I did a clean install. This last month the system has been acting weird. Once in windows its fine, but I was getting startup errors that made windows restart while starting dealing with HD audio. Not sure if the realtek or Nvidia.
Anyhow during all this and now my system had been activated, then deactivated, then activated. Etc. Etc. Etc. I think its finally settled on deactivated.
No hardware changes in all this other than driver and windows updates. So yea.. nothing on Google search nor here mentions this exact problem. Again, I need to point out it was activated with the upgrade first from 8.1 to 10. It also showed activated in 10 for awhile.
The system should only deactivate if new base hardware was installed which this isn't the case.
View 7 Replies
Oct 14, 2015
I can not activate my windows 10,I have done all with the genuine file but it won't activate anyway,could it be that I not upgrade it to w 10?,I did a Clean install directly!
View 5 Replies
Feb 10, 2016
Since the Win10 Upgrade fails on my HP DV6 notebook, I decided to do a clean install.
But now, it won't take the Win7 product key for activation!!
I called MS and they told me that a clean-install will NOT activate using Win7 product keys and that I have to purchase a product key.
I got this same story from two different MS reps.
I thought you COULD activate a clean-install using Win7 key using build 10586.
View 9 Replies
Nov 14, 2015
I was activated before the th2 update. Even after I installed it. Today, I just did a reboot, and I login and now it says I'm no longer activated?It gives me a big error in red saying "Windows can't activate right now. Try activating later. If that doesn't work contact support. Error 0xC004F012".
View 2 Replies
Jul 29, 2015
i just upgraded my original Windows 8.1 to Windows 10, and when i try to activate it, Windows gives me an error
"Windows cannot be activated, please try again later"
How can i solve this?
View 9 Replies
Feb 10, 2016
I had windows 10 activated on my mac (via bootcamp), then I completely deleted the bootcamp partition (to expand it) and reinstalled win 10. Once installed, Windows automatically activated citing "digital entitlement".
View 2 Replies
Sep 12, 2015
I restored my system back a few days because my OS just started falling to pieces with errors. That issue is fixed, but now my windows isn't activated anymore. I have had no hardware changes, since i upgrades from windows 7 except changing the driver for my Ethernet adapter. My error reads Error code: 0xC004C003
View 9 Replies
Apr 14, 2016
It all started out with problems with activation and windows update, so whatever .
A couple of days ago, I suddenly had a watermark in the bottom right corner of my screen saying that I should activate windows. I have a legit copy of windows and had it registered before when I installed it (about 5 months ago) and had no problems until now. When I go to the activation window and attempt to re-register, I get this message: "Windows can't activate right now. Try activating again later. If that doesn't work, contact support. Error code: 0xC004F012"
After trying this during different times of the day for about a week, I started checking other stuff and found another quite big problem: I can't start Windows Update.
The service is set to "disabled" and when I change it to anything but this, it automatically changes back after around 30 seconds. Up until now, Windows Update never had any problems and ran regularily. So then I started googling this problem and found some solutions, all of which do not work:
I tried resetting the Windows Update ([URL]), but that didn't work either, since it coulnd't complete every step. It failed when running "sfc /scannow" at around 15%.
So I searched for solutions to that problem and found this: [URL]....
Checkdisk worked fine, but then I noticed another problem, I can't even run DISM to fix stuff. Attempting to run "Dism /Online /Cleanup-Image /RestoreHealth" returned an error, saying that the remote procedure call failed...
Here is my sfc log: [URL]....
and here my dism log: [URL]....
Short version: suddenly windows is no longer activated, windows update can't be started, sfc and dism fail... I would love a solution that does not require me to completely reinstall windows!
Here are my specs:
I have a Lenovo G700 ([URL]) with an i5-3230M @2.60GHz and a Geforce GT 720M (the rest wasn't configurable). My OS is Windows 10 Pro N x64, version 1511, build 10586.11.
View 9 Replies
Aug 1, 2015
I have upgraded to windows 10 but I did not do clean installation and windows old is present. Now can I do clean installation again of windows 10. How can I do it...
View 1 Replies
Sep 2, 2015
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
View 1 Replies
Aug 15, 2015
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 Replies
Oct 16, 2015
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
View 9 Replies
Jan 10, 2016
ow slow Disk Cleanup has become if you choose 'Clean up system files' and select Windows Update Cleanup after a clean install of Windows 10?
Just the Windows Update Cleanup part is slow - took about 20-25 minutes to get through it today.
Never used to be like that and I'm pretty sure it's something recent. I've done a few clean installs of Threshold 2 since November and it wasn't slow like that until the past week or so (I've done 2 clean installs over the past week and they've both been slow with Windows Update Cleanup).
As I recall. Windows 8 had the same 'bug' and it now seems to have crept into Windows 10 (at least for me).
View 9 Replies
Aug 3, 2015
My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.
View 1 Replies
Aug 11, 2015
I wanted to clarify whether updates that require a restart to install, only install if you actually click 'restart' or do they install if you normally shutdown the computer and then turn it on again later?
I'm sure you could do it that way on Windows 7. Its difficult having to restart my laptop every time, I'd rather shut down normally at the end of the day once i'm done with it and then following day upon booting up, updates install.
View 8 Replies
Oct 14, 2015
When I open my Windows Update, the Upgrade to Windows 10 is there ready for me to download. It has a button saying "Get Started". I checked to see what available updates are ready for me and it shows I have about 8 Windows 7 updates to be installed. How do I get around the Upgrade to Windows 10 in order to only install the Windows 7 updates? I am presently holding off in the installation of Windows 10, but I do want to continue updating my Windows 7.
View 4 Replies
