Updates :: Failed Update Loop

Mar 5, 2016

The update creating this issue: Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140743).These are the steps of the loop:

1) My PC downloads this update automatically in the background. I have no option to stop my PC from downloading it.
2) I am forced to install this update. There is no option for me to shut down/restart without having to install the update.
3) During the restart, I get a notification that my PC was unable to complete the update and hence the changes are rolled back and the whole process starts again.

This thing has been going on for days, wasting my time and getting on my nerves.Why is Microsoft so dumb?

A) If at all my PC has downloaded an update, why don't they save it somewhere on my PC till the update process is successfully complete instead of downloading it again and again wasting my bandwidth?
B) Why have they not given options to opt out of (downloading/installing) troublesome updates like this?
C) Is there a solution to this issue?

View 1 Replies


Similar Messages:


Updates :: Deleting (Failed Updates) In Update History?

Feb 10, 2016

I've disabled automatic updates (drivers, Win updates) by making changes to Win 10. Now every entry in Update History is listed as a failed update. Of course, no update has failed; I don't want to install them yet. Is there a way to delete failed update entries?

View 6 Replies

Updates :: Cumulative Update Failed To Install

Jan 16, 2016

This the first time am having an issues with the update center.the rest of updates from today (Office 16) were fine.Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.the only way to get rid of it (after 30 min) is to press the RESET button.

Tried sfc /scannow => CBS.Log

2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction

[code]....

View 4 Replies

Preparing Automatic Repair Loop - Resetting PC Failed

Oct 24, 2015

I have had this loop for 4-5 hours now, and I have not found any fix for it. I am using build 10240. I have tried reverting back to windows 7, and that failed. Tried start-up repair, that failed. Tried system restore and image recovery, those failed too. Even resetting my pc has failed. I have tried cmd commands, and those also failed. I have upgraded to windows 10 via online from Windows 7, and I do not have a disk or another computer to work with. Nothing has even caused this issue. I just booted my pc like any other day and I was sent into this loop. I have a Gigabyte USB 3.0 powered motherboard.

View 9 Replies

Factory Reset Failed 3 Times - Stuck On Startup Loop Now

Jan 24, 2016

I tried to reset my computer today after 3 years of using it without any sort of re-formatting, and all three times the reset got stuck on 65% before a blue screen appeared and said that an error occurred. It would then give me the options of either:

a) returning back to my windows 10, with nothing changed
b) Trying to reset again
c) advanced options.

I tried the reset 3 times, and after the last try failed I went to advanced options to look at other ways to approach the issue, such as checking if there were any restore points that I could restore to (which there were none).

After that didn't work, I clicked on the first option of just returning back to my windows 10, and that was when it would not start up anymore.

My computer now is stuck on a infinite loop of the launch screen of the ASUS logo, it flashes, then goes onto the second ASUS logo, and this is all it does, go round and round.

I tried to boot it on F8, F9 (the ASUS recovery button), and the 'delete' button. NOTHING WORKS.

I finally tried F2, which led me to the BIOS page? And I clicked on the boot tab and disabled the first boot configuration option, and still to no avail. It returned to looping, and when trying F8, F9, after disabling that BIOS option, and it still won't do anything but loop.

View 1 Replies

Nonstop Automatic Update For Failed Update

Mar 26, 2016

For the past few days I have been having the issue were an update keeps failing in windows 10 so every time it re downloads the update it tells me that my pc is going to restart in about 10 minutes regardless of what I am doing and this is about at least 3 times a dat and it is extremely annoying.

The update is a thing called "microsoft malicious software removal tool" and windows wont let me disable automatic restarts or automatic updates and i dont even need this "update" because its just a virus removal tool which I don't need but windows wont let me cancel the update.

View 1 Replies

Updates :: Can't Activate OS After Replacing Failed SSD

Dec 26, 2015

My computer's SSD failed, and I just bought a SSD and installed Windows 10 on it. However, it is not activated. I originally had Windows 7, then installed Windows 8 Pro, then upgraded to Windows 10. This is all legal.

However, I ran a BIOS product key checker on my computer, and it shows that I don't have a product key in my BIOS. Is there anything I can do?

This is also quite an old machine (from 2007), would it support BIOS product key?

View 9 Replies

Updates Have Been Downloaded But Installation Failed?

Nov 13, 2015

My win-10 computed downloaded the update files yesterday. But the installation has failed.

View 2 Replies

Computers Silverlight Updates Have Failed 26 Times

Nov 25, 2015

On one of my computers Silverlight updates have failed 26 times. Silverlight does not appear on my two newer computers so I did some research and found that it is no longer used. Should I remove it from my computer so Microsoft stops trying to install to it? 

View 2 Replies

Updates :: Remove Update From Control Panel Check For Updates

Jan 26, 2016

I'm trying to intstall updates for Windows 7 in Control Panel/Check for updates/Install Updates, but Upgrade to Windows 10 is on screen and I can't seem to proceed without the update. I already tried it and I don't like it so backed out. I don't want to upgrade and want it off of my computer. How do I remove it and all the components associated with it? I only use it for personal use, email, Facebook, a few games, etc. and not for business. 10 was too confusing and there's no one over my shoulder teaching me a new system and where all my stuff went.

View 1 Replies

PC Reboot Loop After Update

Aug 3, 2015

I was using a machine with Windows 7 Ultimate 64bit, and it was working perfect till the day I upgraded to Windows 10. First, I had a few problems during the update, probably due to the not updated (with the last drivers) nVidia card.

My specs:
-SSD hard drive as boot
-MOBO is Gigabyte GA-768XP-UD3P updated with the lastest BIOS from 2013, UEFI.
-a few other hard drives
-nVidia GTX 980 graphic card

Well, I finally was able to install the Windows system, but after the shut down and boot, I couldn't enter it. The computer started to reboot after a few seconds, sometimes I'm able to see the BIOS screen (but pressing any button doesn't work) and then it boots again in a few seconds.

After some search online, I understood it could be a problem of the BIOS that was corrupted (why if it worked till the day before??). I used a very strange system to press the power on button and put down and up the PSU for 3 times, then when I rebooted again I saw the screen with "The main BIOS is corrupted and we have to recover it from a backup".

The setup of the BIOS from backup worked, but with "load optimized default" I then got a Windows 10 blue screen error " :-( INNACCESSIBLE_BOOT_DEVICE"

I then entered again the BIOS and changed some info like AHCI, UEFI only, etc.

Then, after a reboot it worked and I could enter WINDOWS 10 finally.

I thought I was OK, then I tried a reboot and it worked. BUT, when I tried to first shutdown and then boot, again I went inside the BIOS reboot loop!!

View 5 Replies

Installation :: Linux Grub Bootloader Failed After Updates

Nov 29, 2015

My son (26) just returned a long term loan P8B67B Deluxe to me with Linux and Win 7 on it. I upgraded 7 successfully, but after updates installed last night the PC refuses to boot saying "error, no such partition, Entering rescue mode .. grub rescue>" Repeated boot attempts saw it fall into error 53 on the mobo lcd display. Removing one ram stick brought me back to booting to "error, no such partition, Entering rescue mode .. grub rescue>"

Trying to boot just one HDD either gives the above message, or "error, no such device : 521683dd-0417-4a66-b3fb-c6c67b9cc9fo grub rescue>"

I don't need the linux. That was my engineer son. What fixes are there to bring it to Win 10 alone? I don't know the new key or the old 7 key. Should have checked and written it down

View 3 Replies

Updates :: Automatic Updates Even Turn Off The Update Service

Aug 25, 2015

i am scared enough about the automatic updates that i turn off the update service

View 9 Replies

PC In Endless Restart Loop After Update

Jun 17, 2015

Just downloaded the newest update for Windows 10, I was asked to restart my PC to install it, that was over 30 minutes ago, since then my PC reaches the Microsoft logo and under it, it says Preparing Automatic Repair and then it restarts and does that all over again, what am I suppose to do? I can't even get past it.

View 1 Replies

Windows Update Restart Loop

Jan 18, 2016

I have Windows 7 Home Premium (64-bit).
 
I finally decided to upgrade to Windows 10 yesterday (1/17/2016). It downloaded roughly 5.76 GB into a hidden folder : "C:$Windows.~BT"
 
Then it prompted me to restart my computer, so I did. Once restarted, nothing changed.
 
So I went into Windows Update, and it just tells me: "Restart your computer to install important updates" and it has a "Restart now" button. I've restarted roughly 40 times or so in the last 2 days after trying various fixes, and it doesn't make a difference.
 
I checked the update history, and there are a whole bunch of Pending and Successful updates with a "Date Installed" date of 1/15/2016. Nothing more recent either.

View 2 Replies

Installation :: Update Stuck In Reset Loop?

Aug 1, 2015

My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.

View 2 Replies

Boot Loop And Blue Screens After Update

Jul 31, 2015

So this is not my personal computer, but this is my mom's computer. Its an HP Slimline Desktop computer, not sure about the exact model but it is running with an AMD Athlon X2 B24, 8GB of DDR3 RAM, AMD R5 240 and a Corsair Neutron 120GB SSD.

Everything was working fine when it was running a legitimate OEM copy of Windows 7 Home. However, after the Windows 10 upgrade process, it got stuck in "Welcome Back" Screen and she told me after she clicked "Next" the cursor started spinning, and it rebooted. Now after checking it, Windows wouldn't load to the desktop, it would just go on a bootloop and blue screens.

She didn't back anything up before the upgrade. I do not know what to do.

View 1 Replies

BSOD :: Latest Updates Failed And Machine Looping In Restarting State?

Sep 10, 2015

Date: 10th September 2015. Machine working fine under windows 10 for over a month. Checked to see what Microsoft updates after doing a Microsoft Defender full scan and everything ok. It seemed from settings->check for updates that there were a number of updates that required the machine to download and restart. Decided to update immediately and did the same on a dell laptop and Linx 10 tablet all running windows 10. All machines did update and restarted fine, except my main laptop - Toshiba Satellite S55t-A5334 did not recover after the update and is now continuously in "Restarting" loop. Tried powering up and down and trying to force it to reset into some sort of safe mode. how I can get it into state that will allow me to go back to the last known working state as I'm fairly sure this is an update that is not compatible with the hardware. 

View 2 Replies

Failed Update And Restore

Apr 1, 2015

I had windows 8.1 and got access to new build of Windows 10 it started to install but the laptop got shut down mid upgrade then on boot up went straight to a black screen saying "restoring your previous version on Windows" and it has been stuck there for 3 hours, I have tried to use F8 and F11 to try and get to system restore but nothing works,

View 1 Replies

Windows Update Failed

Oct 20, 2015

So after a stressful day at school I got home anxiously waiting to get on my computer, only to find out that after a recent update my computer has completely stopped responding. Now in the first few hours of dealing with this problem I was able to access the Windows repair options, only to find out that all of them failed. I was unable to do a system restore, nor diagnose my computer or even nuke it.

Later on things eventually got worse because now I'm not even able to access the options to fix my computer anymore or even downgrade to Windows 8.1. All that pops up after my computer starts up is "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system.

View 1 Replies

Why Can't Install Update After Two Failed Attempts

Nov 13, 2015

I've been trying to install the newest W10 update, but I've been having some trouble. I've tried 2 times to update my computer but it restores back to my previous version of windows because the update failed.

I've checked Event Viewer and all that gave me was "error 0x8024200D" and nothing else that I saw that could work.

I'm running Windows 10 Pro on Version 10.0.10240 (Build 10240)

View 2 Replies

Update Shows As Failed Several Times

Jul 30, 2015

I need to get around the windows automatic update for my Lenovo T440s laptop. the update shows as failed several times in windows update. I never make it to any download screen. I am upgrading from 8.1 pro and all updates are installed.

View 1 Replies

Updates :: Can Apps And Office Update Through Windows Update

Nov 2, 2015

I am having trouble accessing MS app store and also updating office 2016 through any of the office applications.

My question is, will win 10 apps and office 2016 default update through windows update?

View 3 Replies

Installation :: Explorer Crash Loop After Update On Fresh Upgrade

Aug 18, 2015

I did an in place upgrade of Windows 7 using a USB key made with the tool Microsoft put out. I chose not to download updates during the install, so after the initial boot, Windows started downloading updates. I reinstalled the latest nVidia drivers/Geforce Experience as well. During the next boot cycle, at some point explorer crashed and the screen flashed black, at which point that process repeats forever. I let it go over an hour just to see what would happen. URL...

The suggestion on that site is to disable 2 Windows Services: Problem Reports and Solution Control Panel Support and Windows Error Report Service. This didn't work for me, though it appears to have worked for many others.The culprit for me was Apple's iCloud service. As the taskbar was being populated, this task would load and throw an error message about logging in, at which point the crash loop began. Uninstalling this program solved the issue for me.

View 1 Replies

All Three Attempts Of Update Failed And Stopped At 32% Of Installation

Aug 30, 2015

I have tried to update an older laptop to Windows10, three times, or roughly 8 gigs of data. In all three attempts it has failed and stopped at 32% of the installation; and in all three attempts Windows had to automatically roll back to Windows, in my case Windows7.

Searching for solutions, none of them work, one of those solutions is to disconnect all your peripherals and try again based on the error you see in the image. I only have one peripheral and I seriously doubt it would cause Windows10 not to update when I have the same device on another machine and the update to Windows10 worked successfully; although I disconnect the one peripheral and I was right, same problem, Windows10 failed to update ?

View 1 Replies

HP Pavilion Dv6 / Update Failed Error C1900101

Jul 29, 2015

I have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?

View 24 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved