Updates Not Being Install On Build 10130
Jun 13, 2015
Despite all of the updates that are released my laptop doesn't seem to be installing them. I have restarted and turned my laptop on and off multiple times but to no avail. It is just showing this.
View 3 Replies
Similar Messages:
Jun 4, 2015
The build worked fine for a few hours...but while I was watching a video on youtube my desktop rebooted and then it was an infinite reboot loop(works only till the windows loading and when coming to the sign in page it reboots)..
View 3 Replies
Jun 25, 2015
before in 8.1 I would have my 4 pin password to get passed the lock screen on my SP3, but now I have to type in my LONG AS HELL Microsoft password..
View 2 Replies
May 30, 2015
It's subtle and hard to put your finger on at first, but I noticed my eyes getting tired and getting a headache from the lack of contrast, so I plugged it into an external monitor and compared between a computer with an older build and the new build and the blacks are no longer black, they're grey and the whole contrast is muted with everything washed out.
No update available to the GPU so I had to roll back to an older build. I've still got a headache from that, hope they catch this and don't just steam ahead
View 1 Replies
Jun 2, 2015
Download is stuck at 0% since the past 2 hours..I opened task manager to see if something was being download but there was no network usage..I also restarted the computer but no avail..
View 6 Replies
Jun 22, 2015
First i updated from build 10074 to build 10130 my laptop did not detect my cd/dvd drive ....
Tried the registry tweaks NO GO
Microsoft fix it windows 8.1 no go
Upper filter and lower filter missing in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
then
Clean installed Build 10130 ISO using USB and still my laptop did not detect my cd/dvd drive
Tried the registry tweaks NO GO
Microsoft fix it no go
Upper filter and lower filter missing in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
Built in troubleshooting NOT DECTEDING my DVD drive removed and reseated the cd/dvd driver still not detected ....
View 3 Replies
Jun 25, 2015
I'm running Windows 10 (build 10130) in a virtual machine and I noticed that the startup sound wasn't playing. The box for "Play startup sound" is checked in the Sound control panel, and I even checked imageres.dll to see if the startup sound was still there. (it still is.)
View 9 Replies
Jan 29, 2016
So, recently (after the November build release) I woke the next morning to find that my computer underwent a rather major update. After which, it seemed, my home network was thrown out of wack. I immediately rolled/reverted/recovered to previous build. But now everything is out of wack. Most of the time I have to restart my computer just so it'll communicate with my printer to start printing.
And restarting the computer is twice as long if it restarts at all. Most of the time It gets stuck in the "restart" progress animates (the rotating circles) and I have to press the restart button on the computer tower, with great regret and dread. Transferring files from one windows 10 device to another is a 50/50 hit or miss. I'm not literate when it comes to networking and was super happy how everything was.
But now, not only is my wifi home network out of wack, but my computer itself is wonky. I figure I might as well reinstall the newest build in hopes that it'll at least fix a fe of the problems. But anytime I check for updates, the newest build no longer shows up.
View 1 Replies
Dec 10, 2015
When I first got Windows 10, I experienced frequent crashes and hangs, and I frequently had to restart, because something wasn't working right. About a month ago, the system finally became reasonably stable. Yesterday, I upgraded to build 10586, and so far at least I haven't had any crashes or hangs, but every time I turn the computer on, I have to restart to get everything to work right. Is it possible to just ignore those build upgrade notices, so I can enjoy a stable OS for a while?
View 9 Replies
Dec 4, 2015
There is a wds latest preview build , can I delete it ..? I only have 256GB SSD , so I try to save as much storage as I can ..
View 4 Replies
Jul 21, 2015
It seems when updating online between builds, settings are lost, registry tweaks etc.
View 1 Replies
Jan 25, 2016
Somewhat unusual situation here. A machine running the latest build (11102) got badly infected by malware. It was such a major attack that I was about to reload the earlier day's image from my Windows Home Server. But it seemed even easier to revert to the previous build, not yet removed from the Windows.old folder. This I did, and everything soon was running fine as expected.
The issue is that the Updates check is not offering Build 11102 again. This isn't a showstopper; I'm sure there will be another newer build soon. But it would be nice to be back up on this latest build, just as all my other Win10 machines are running.
View 6 Replies
Nov 12, 2015
I have 2 desktops and 1 laptop. Both desktop update fine to build 10586 but the laptop keep saying up to date after check. Even try Lan connection still no go for laptop to update. How to force laptop to update? All running Windows 10 Pro.
View 7 Replies
Feb 10, 2016
I have been successfully updating as a Insider Win 10 since Oct 2014 with no problems. I recently did a clean install of build 11102 and it seems ok. A few slow downs and hangs but generally ok. Recently I received notification from MS that build 14257 was available for download. I downloaded the file as always and it went through the usual prep and getting ready etc. When it rebooted to start the install I get a screen asking me to "Choose your Keyboard L/O" I choose United States and then it reverts back to "Choose an Option" I choose "continue & Exit to Win 10" and it boots back into my build 11102. I've tried this three or four times with the same result. I have downloaded and run the MS Fit-It for upgrades to no avail. I have tried using a Local account, still does the same thing. I created an ISO TechNet and it does the same thing when trying to do a clean install. I have run DISM and SFC /scannow
View 9 Replies
Nov 21, 2015
My motherboard died, and I had to get a new one. I bought the same model. The rest of hardware on my PC remained the same. After that upgrade my Windows 10 isn't activated any more.
I don't have Windows 7, 8, 8.1, or 10 licence, but I am early Windows 10 Insider, and I recieved free Insider builds. They had expiration date, so I had to keep ugrading to new builds, and stay in the Insider program to retain my free "licence". I was doing so, and I provided feedback to Microsoft about every build.
I was hoping that "minor" hardware change wouldn't affect my Windows 10 activation, because all Insiders should have free "licence" that is tied to my Microsoft e-mail account?
Now my Windows 10 Insider 10586 build isn't activated. How can I activate it? Shouldn't all Insider versions be free? Should I sign for Windows Insider program all over again?
View 5 Replies
Oct 16, 2015
I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either.
They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in Windows Update. Tried the standard troubleshooter, and by resetting WU to no avail.
View 9 Replies
Jan 5, 2016
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates? I am assuming I would get more updates than these.
Running version 1511 build 10586
Is it because Win10 is too new ???
And I kept pressing the Check for Updates button and it said no more new updates.
View 9 Replies
Jul 5, 2015
Upgrade install from the same build is that possible? I want to try an experiment.
View 8 Replies
May 30, 2015
I am just about to clean install from build 10074. I assume that it will update to the latest build once installed. I was wondering if I need to install drivers and wot not before upgrading via WU or do that after the upgrade to 10130 is compete.
View 6 Replies
Dec 28, 2015
I've tried installing the language packs using windows updates, or directly downloading and installing using lpsetup.exe... It always starts the installation, then it fails at the end.
View 2 Replies
May 23, 2015
I am currently using an asus laptop and running windows 10 build 10074. I keep trying to upgrade to the new 10122 build but every time I get to the installing windows circle. It gets stuck at 19% overall and 64% copying files. I have tried the solution for the surface pro 3 that gets stuck at 18%. I have also contact Microsoft 5 times and they couldn't fix it.
View 3 Replies
Jul 4, 2015
Right, so I've got a laptop that I'm currently trying to install windows 10 tp onto. It's the exact same model as the one I'm running on (it's my brothers, and I'm trying to fix it for him), but I've hit a snag.
The insider program website says that you can burn the .iso to a dvd and install it like that, but I've done that, and the laptop just stalls at a windows logo screen.
There's no operating system currently installed -- all 900 someodd GB are free and, using a windows 8 install disk to access a command prompt, DISKPART says the partition is healthy. I've cleaned and formatted it several times now to no avail.
View 9 Replies
Jan 8, 2016
I mean the registry "hack" systemuseslighttheme set to 0, I did a fresh install of build 10586 on my laptop and it isn't working no matter how many times I try, restarting, setting it to 1 or 0 it stays white, I cant stand white backgrounds
I had the exact same build before, everything up to date so I don't see why it isn't working now, the colored windows are working though
View 2 Replies
Dec 10, 2015
I am trying to clean install windows 10 on a custom build pc. I have a installation usb created by the Windows Media Creation tool. I boot, it goes into set up, and I choose which partition and all that. It begins installing. Then it restarts after it finishes getting the files ready.
This is when things go off the rails. When it boots back up, it returns to the initial set up screen. As if I had not just gone through the first part of the install. I have tried a few times and same result.
Build: OCZ SSD 240 gb
Asus MB
AMD CPU
I can write out the rest if it is relevant.
View 1 Replies
Sep 19, 2015
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
View 4 Replies
Dec 10, 2015
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
View 9 Replies