Upgrade Fail Due To WiFi Connection Loss?
Jul 27, 2015
I was upgrading from WP8.1 to W10 and all was going fine but then my internet connection went off for about 1 minute and then back on. Ever since that happened, the phone has been restarting (Nokia logo) and then the cogs are displayed for abt 15 seconds and the phone switches off. It repeats this if the USB cable is plugged in. I cannot use my phone.
View 1 Replies
Similar Messages:
Nov 5, 2015
I upgraded from windows 7 to 10-when finished there was a red cross through the wifi icon.Having read numerous forums,I established that there was no old VPN software;I updated the Broadcom 802.11b/g/n software and in network adapter properties,I unticked power management switching off the adapter;also,altered bandwidth to 20_40MHz.As soon as I clicked on that,the wifi switched on!It then works until the computer is switched off;when on again,same problem.If I go to network adapter properties,and disable and then re-enable the adapter,wifi comes on again.
View 7 Replies
Sep 5, 2015
Every time I turn on the computer, my wifi is always there. when I come back from sleep mode, it is not. no wifi options are available in the network section.
it is not signal strength. I had a slight USB issue, but as I said, I always get wifi when I turn it on, so seems any USB issue would show up when I boot either way..
Is the power surge to the USB ports the same whether you boot from off versus from sleep? is coming back from sleep different somehow than powering up from off?
View 2 Replies
Aug 12, 2015
I have a custom built computer with the following relevant internals:
Intel Core i5-3750k Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo)
ASUS P8Z77-V LE LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
G.Skill Ripjaws Series 16Gb (4.4GB) 240-Pin DDR3 SDRAM DDR3 1333
ASUS HD7850-DC2-2GD5-V2 Radeon HD 7850 2GB 256-Bit video card
Samsung 840 Pro Series MZ-7PD128BW 2.5" 128GB SATA III Internal Solid State Drive
I was using Windows 7 with an external wifi adapter for internet access and the computer was perfectly fine. Upon upgrading to Windows 10, I instantly ran into issues that quickly grew worse. From the get go, I was unable to utilize anything on the taskbar, including icons that I placed there like Chrome and the newly installed Edge. The search bar was likewise inaccessible and now, after multiple restarts, I can no longer use the Start button with either mouse or keyboard. The internet icon on the taskbar will not work and even when attempting to access the internet after hitting ctr+alt+del, I find that the computer cannot even detect a connection, even though I know it should be able to. After a few minutes trying to mess around with other fuctions, the entire computer basically freezes and the entire computer locks up forcing a hard reboot.
Pictures and videos will not load (I can click on the My Computer icon on the desktop and access everything there), the computer telling me the files are corrupted. Same goes for documents, and games will not launch (Steam obviously cannot connect).
For lack of a better term, this issue is... weird. It's like I only have selective functionality over certain programs, although its selective enough that it has basically rendered my PC useless. I cannot even figure out how to uninstall Windows 10 because I can't access the Start menu.
View 1 Replies
Nov 5, 2015
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
View 2 Replies
Aug 7, 2015
Not much on the web about this failure. Some threads talk about disconnecting all USB and devices so you just have the core system...really? Should I call MS about this? I'm sure they are flooded with probs.
View 1 Replies
Sep 17, 2015
During the week i had the windows 10 upgrade install onto my Toshiba Satellite laptop that was running Windows 7. Windows 10 did open but then crashed as it was booting up stuck in an error reboot loop. So i tried to restore the previous version of windows and it has been stuck in the boot cycle ever since. It will run a continuous loop restarting the process every 10 mins. I can't get it ti get out of this reboot loop. What to try and get my laptop up and running.
View 2 Replies
Mar 12, 2016
After upgrade Dell Inspiron 580 to win 10 the system boot option F12 seems disabled and the box will not boot from the alternate drives (cd then USB) enabled on the motherboard. F2 still brings up the system motherboard edit.
The failure to boot from cd defeats my drive imaging backup software.
I am unable to find a secure boot option on the motherboard, so I suspect the issue is something else.
View 3 Replies
Aug 28, 2015
Attempting to upgrade to Win 10 I get through the entire process only to have it fail at the end and it gives this error code 80073B92-20009. This is going from Win 7.
View 7 Replies
Jun 3, 2015
After installing windows 10 preview I can't connect to Internet? No problem connecting access point but no connection to Internet. Installed on a Dell laptop.
View 19 Replies
Jan 30, 2016
I ran into something strange this morning when I logged onto my computer: I couldn't connect to my wireless network anymore.
Fairly standard, I thought I'd go reset the router and have it be done with, but then I noticed that my phones were both still fully connected. (2 android phones on different OS versions). So my router itself wasn't have a problem, and I was still receiving internet.
I restarted my computer, as any good human being does, and the problem persisted. I then 'forgot the network' and restarted. Typing in my password again and trying to connect, didn't work.
I then remembered I had recently updated Windows 10 #sillyme (Not like I had a choice anyway x_x) So I thought maybe the driver had been updated. Nope. I even tried uninstalling the driver anyway and restarting. Nothing changed.
OK, so then maybe it's my hardware that's going bad? Luckily I have a dual boot So I booted up Ubuntu instead of windows and bam, everything is working perfectly. Absolutely no problems with connecting to my network.
Can't connect to WiFi network. I've already tried: restarting computer, forgetting the network, and uninstalling the driver. Also, it's not hardware as I can connect on the same machine using a different OS.
View -1 Replies
Nov 4, 2015
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 Replies
Dec 16, 2015
I updated to Windows 10 from Windows 8.1
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
View 9 Replies
Nov 8, 2015
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.
My computer obviously "remembers" the password for the WiFi and i used to be able to just unplug my hub and it would automatically connect to the WiFi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the WiFi however it says "limited" and no websites work, effectively not connected even though it says it is.
To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
View 3 Replies
Sep 3, 2015
My Internet through ethernet and wifi were both working fine yesterday and now nothing..
I've tried troubleshooting, Driver installs, ip config, firewall settings, and spent hours reading forums but just can't sort it.
Hp pavilion laptop.
View 10 Replies
Nov 5, 2015
I am experiencing Problem with the wifi connectivity after I updated my Dell Inspiron 15 3521. I updated the Dell Wireless 1703 802.11b/g/n (2.4GHz) to the latest and tried every steps I could find in the blogs, youtube and communities talk but still couldn't fix the problem.
View 9 Replies
Jun 23, 2015
So i updated to the preview last week, since then, my wifi connection speeds have gotten worse..Perhaps it is a coincidence, but i dont think so since i still pull pretty good speeds on my iphone, but on my lenovo all in one, speedtest it is like 2 mbps. Prior, it would be 25-30, i haven't moved it either.
View 1 Replies
Oct 11, 2015
I'm using a HP r046tu laptop windows 10 which I've updated it. So my is when every time I'm going to boot my laptop to use it. My Wi-Fi connection is too low and it doesn't suggest any available routers in my house. I've updated all my drivers a prior to the Windows 10 update
View 3 Replies
Oct 31, 2015
Normally my WiFi connection is like 40-50 Mb/s, but it slows down to, like, 10 Mb/s or so with BT on. That maybe does not sound bad, but often websites are taking ages to load. I switched my router to 802.11n; even if that worked, the improvement is hardly noticeable.
What is best is that it is not always the case, sometimes the Internet speed is just fine.
I cannot download the drivers for Windows 10 from the HP website (they are not there), although they were available.
Can the Internet speed be amended with some Windows setting change?
View 1 Replies
Nov 7, 2015
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.My computer obviously "remembers" the password for the wifi and i used to be able to just unplug my hub and it would automatically connect to the wifi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the wifi however it says "limited" and no websites work, effectively not connected even though it says it is.To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
The same problem also occurs in reserve if you get me. Disconnecting the Wifi and then plugging in the hub, it also says limited connection until i restart the comp. Virgin Media have been of no support whatsoever, to be honest I didn't expect them to be as it seems like a computer/windows problem.
View 2 Replies
Nov 10, 2015
My laptop is for some unknown reason not connecting to the internet via wifi or ethernet. It will also not diagnose the problem as it says The Diagnostics Policy Service is not running and it cannot fix it.
View 4 Replies
Nov 25, 2015
I recently changed my wifi Mac Id using Technetium as my original ID got blocked. I had to reinstall the drivers and restart the PC to get the Network card working. But that it is fine, the Wifi connection disconnects every 5 minutes or so. I have a Broadcomm 802.11n adapter Driver version: 7.35.290 dated 6/07/2015.
View 3 Replies
Sep 9, 2015
I was attempting to figure out how to fix my internet connection, and there was an option which said disable, which i thought would temporarily disable my connection and allow me to simply reconnect. i hit that disable button, and all of the wifi disappeared from my laptop. I physically have turned the wifi on and off multiple times, but the internet connections box wont even show a wifi option. i connected with an ethernet to the internet, and it works fine. I don't know how to reenable the wifi on this new windows 10 system, since i just got it yesterday. i am using an older acer aspire 5742-6814 laptop.
View 7 Replies
Oct 27, 2015
I'm currently experiencing loss of internet connectivity. My wifi is working on my other devices, phone, iPad etc. but on my Windows 10 laptop the wifi signal shows as "limited" and I have on connection.
View 2 Replies
Nov 10, 2015
I have a laptop with Windows 10, and it has been working fine for months. Yesterday I thought I had a connection issue with the Internet, and set the computer aside until it was resolved. Later I checked my phone, and saw that the WiFi is actually working just fine. I have restarted and reset and tried to connect to Hotspots and all sorts of netsh commands.
View 2 Replies
Aug 9, 2015
After the free upgrade all worked properly, then i did a clean install (format) with a bootable usb that i made from media center. 6 days now no Internet connection, no wifi option. I think its the common problem with Wifi on Wos 10. As you realize i have only the windows files in my hard drive, the driver for my wireless adapter (Airties 2410) and the intel management center driver. I tried everything from the many possible solutions but not luck for me, even installing older drivers for my wireless adapter.
View 2 Replies