Upgrade Failed 2 Times On HP Pavilion G6 Laptop - What To Do
Feb 1, 2016
I have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
View 1 Replies
Similar Messages:
Dec 9, 2015
Since upgrading to Windows 10 I can't send e-mails from my HP Pavilion 15 laptop (64 bit) but I do receive them on both outlook and live mail but this problem does not effect my dell desktop (32bit) is this a windows problem or my laptop
View 2 Replies
Sep 24, 2015
I have tried upgrading my Dell venue 8 Pro many times from GWX, installation media and direct download in normal and also after reset of tablet with secure boot and also removing secure boot, removing fast boot and with fast boot using all permutations and combinations. Still I am unsuccessful. I am not finding any way to get support from Dell also. It goes to upgrade 91% always and then says going to reboot. But it reboots to windows 8.1.
View 9 Replies
Dec 24, 2015
I convinced my friend to upgrade to windows 10 on his laptop and it failed leaving it screwed.
The laptop is based on a Clevo W350ET chassis.
When you turn it on it goes to a screen saying 'Recovery Your PC/Device needs to be repaired, A required device isn't connected or can't be accessed, Error code 0xc000000f'.
Any options like revert to a previous built, system restore or whatever do not work.
Any chance of saving the current install or will I have to reinstall everything? My friend has old programs he is concerned he cannot get anymore.
View 3 Replies
Jul 29, 2015
I have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?
View 24 Replies
Jul 30, 2015
I need to get around the windows automatic update for my Lenovo T440s laptop. the update shows as failed several times in windows update. I never make it to any download screen. I am upgrading from 8.1 pro and all updates are installed.
View 1 Replies
Mar 6, 2016
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
View 1 Replies
Nov 25, 2015
On one of my computers Silverlight updates have failed 26 times. Silverlight does not appear on my two newer computers so I did some research and found that it is no longer used. Should I remove it from my computer so Microsoft stops trying to install to it?
View 2 Replies
Jan 12, 2016
I have an hp pavilion dm4 laptop. i have installed windows 10 and using for last 10 months but after updating to latest build 11082 my finger print scanner is not detected in start up login but i can add fingers and delete fingers in windows hello section. this started only after latest build was installed prior to that i was able to work it out.
View 1 Replies
Aug 11, 2015
I am using hp pavilion 15 series P077tx laptop. Currently I am running windows 10 single language. Everything works just fine but when i turn off the laptop it wont shutdown the display goes off but the power led & the system led remains on. I have to hold the power key for 5sec to turn off my laptop every time.
View 1 Replies
Dec 11, 2015
Basically I just got windows 10 and i noticed a windows update i tried it 3 times before restarting my computer and the update kept giving me this ...
Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063) - Error 0x80070643
View 1 Replies
Nov 8, 2015
I updated my HP Pavilion laptop to Windows 10 last weekend. Ever since then, I've had a problem any time I'm typing. I can't seem to type for more than 5 seconds without a left click happening on its own (sometimes it's a right click, oddly), which usually either opens a menu, moves where in the document/webpage I'm typing, or stops my typing altogether.
For example, if I'm on an email website, and click New Mail or Reply and leave my cursor hovering over that button, after about five seconds of my typing, the button is clicked again. If I'm typing in a box (like I'm doing right now), I can keep the cursor hovering over the box and my cursor will click somewhere else in the box suddenly, or if I keep the cursor hovering over the outside of the page it'll click and suddenly I can't type anymore. If the cursor is hovering over something I've already typed, I'm suddenly typing back in that earlier text.
This happens when using both a wireless mouse or the touchpad. I typically have the touchpad turned off so I can use the wireless mouse, but have the same problem with the mouse off and its USB dongle not connected.
I also have a problem when using the touch pad that after I've typed for, again, about five seconds the touch pad is completely unresponsive. That's not as bad a problem, since I normally use the wireless mouse. But I'd like to get that fixed, too.
View 3 Replies
Dec 29, 2015
after upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 Replies
Jan 24, 2016
I tried to reset my computer today after 3 years of using it without any sort of re-formatting, and all three times the reset got stuck on 65% before a blue screen appeared and said that an error occurred. It would then give me the options of either:
a) returning back to my windows 10, with nothing changed
b) Trying to reset again
c) advanced options.
I tried the reset 3 times, and after the last try failed I went to advanced options to look at other ways to approach the issue, such as checking if there were any restore points that I could restore to (which there were none).
After that didn't work, I clicked on the first option of just returning back to my windows 10, and that was when it would not start up anymore.
My computer now is stuck on a infinite loop of the launch screen of the ASUS logo, it flashes, then goes onto the second ASUS logo, and this is all it does, go round and round.
I tried to boot it on F8, F9 (the ASUS recovery button), and the 'delete' button. NOTHING WORKS.
I finally tried F2, which led me to the BIOS page? And I clicked on the boot tab and disabled the first boot configuration option, and still to no avail. It returned to looping, and when trying F8, F9, after disabling that BIOS option, and it still won't do anything but loop.
View 1 Replies
Mar 26, 2016
My HP Pavilion dv7 Notebook PC has recently had some issues, so I had to reset it to factory settings (Windows 7) and then upgraded again to windows 10. Now my fingerprint reader is not working, I do not have windows hello on my laptop at all, and I can't even find it as biometric devices in my device manager. can I do something to make it work?
View 1 Replies
Nov 13, 2015
I recently managed to get a cryptowall/cryptolocker virus. I wiped everything, formatted c: and reinstalled windows 7 home premium. Was getting constant, seemingly random BSODs 10+ times daily. Tried a bunch of things, didn't work, so recently upgraded to windows 10. The BSOD's are a lot rarer but still occur at annoying times.
I've had the PC for nearly 3 years now. Prior to the reinstalls there was never 1 BSOD and the machine would stay stable for weeks on end without a restart or issue.
View 2 Replies
Aug 4, 2015
I have already upgraded to WIN10 from WIN7 on my experimental desktop and then reverted back using the built in facility. Can you do this more than once if you keep on wanting to give it a go to see if bugs have been fixed or is this eventually going to cause issues with the license?
View 3 Replies
Jul 30, 2015
Windows 10 has failed several times to upgrade. I have tried tried to install using the $windows-BT file but it gives an error notice 0x80070002.
View 1 Replies
Nov 22, 2015
I tried to reset Windows 10 after having problems with Drive C ,after going through some of the procedures a notice came up saying it couldn't reset. Now nothing comes up on the screen only the Samsung name flicks on & off. I have pressed the F4 key to no avail.
View 1 Replies
Aug 2, 2015
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
View 5 Replies
Mar 10, 2016
Every morning when i switch on laptop and error occurs"failed to connect to a windows "
View 2 Replies
Dec 12, 2015
I tried to reset my laptop. In the process of resetting it shut down due to overheating. When I turn it back on, the logo appears but no loading bar shows up. It hangs there for a few seconds and then it restarts and keeps cycling over like that. I tried to do a hard reset by taking out the battery and plug, then holding the power button for 30 seconds. I tried doing a system restore. I also tried removing the ram to see if that would work but no luck.
Here's my specs:
- 2.50GHz 3rd generation Intel Core i5-3210M Memory
- 8GB DDR3 SDRAM (2 DIMM) Video Graphics
- NVIDIA GeForce GT 630M switchable graphics with 2048MB DDR3 and up to 1696MB total graphics memory
- Hard Drive - 750GB
View 3 Replies
Aug 22, 2015
After unsuccessfully trying to installing windows 10,it was stuck on 46% for 17 hours.
I tried to reinstall my windows 7 Pro Disc,it wouldn’t boot and was not recognize the disc,l tried to load and boot an Linux Ubuntu & Mint via usb & disc,didn't work.
I tried an XP pro disc that l downloaded and burnt onto a CD,that loaded XP pro on my PC. Which seems to work apart from not been able to access the internet.
I'm thinking maybe l should wipe the hard-drive and try to reinstall my windows 7.
View 13 Replies
Nov 27, 2015
Once again, Windows 10 pro 32bit upgrade failed when it reached 71% installed.
I have an ASUS H81M-PLUS MB with intel core i7 processor.
As on previous attempts, a small window appeared with the caption "Microsoft Visual C++ Runtime Library" Below the caption was a small red circle with a cross in it and below that an uncaptioned button
Clicking on the button resulted in a message "Restoring previous Version of Windows" It then proceeded to do just that.
Having read other posts on this thread, for this attempt I disconnected all USB3 peripherals so that isn't the problem.
View 11 Replies
Aug 11, 2015
I can I get rid of this failed download and start again. When I try to do this ,the failed upgrade installs and then freezes at 91%. It is taking to 2.? Gb of my HDD so I know it is on the computer somewhere.
View 9 Replies
Jan 31, 2016
My father hit yes to upgrad his HP Probook 6407b from Windows 7 to Win 10. He did not realize what he was saying yes to.He brought it to me before it finsihed. I got into win 10, but then had issues with HP security software at boot. It would hang at boot, say something about a finger print reader, and then allow me to log in. So I decided to revert back to win 7. that failed. Goes to try a startup repair and it does not work. It looks like win 7 trying to do it and not 10.
Is there any way to recover either win 7 or 10?I tried a win 10 usb drive, but it says the upgrade was previously started in windows, turn off machine and restart, but that fails.
View 9 Replies
