I have been using windows 7 ultimate for more than 2 years and now I want to upgrade to windows 10. My friend recommended a clean install, gave me an iso for windows 10 enterprise, tell me to use a program called rufus and referred me to this tutorial
My question is: Is it better do a clean install or simply upgrade from the built-in windows update tool? Then, if I should do a clean install, is rufus the suitable tool for making bootable usb?
My computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
I cannot seem to install any other way. Media Creation Tool will not start. When I mount the ISO and click on setup I am given a small, rectangular blue window that says "Windows", and it disappears after a second. I have a tried through Windows Update and get fail code 8007005. I also have been notified two separate times through "GetWindows10" icon that I am ready to install and once received the 80070005 code and the other time the famous "Something Happened" screen.I was able to create a bootable flash but my understanding is that I can only perform a clean install if I boot with it and would need to purchase an activation code.
I am running Windows 8.1 64-bit on an HP Pavilion 15 series laptop and I am able to successfully update anything through Windows Update except Windows 10 upgrade. All of my other *.exe files start fine except Setup on Windows ISO.
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
I have tried everything I can think of, including the stand-alone ZA uninstall, however the Win 10 installer is detecting *something* and refusing to proceed until ZA is uninstalled:
Some Apps need t be uninstalled These programs need to be uninstalled because they aren't compatible with the upgrade. Zonealarm 10 (2012)
I reserved my upgrade which is now telling me that the upgrade is available, i enter the 'OK, let's continue' area and get the 'working on it' screen and it stays there for a long time and goes nowhere, Is this because I have previously downloaded an ISO file and transferred to my laptop to evaluate Win 10 and now my desktop will not load the software even though it is saying the download is complete.
I had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
Installing windows 10 as an upgrade from windows 7. Everything was looking good leading up to the install, genuine windows, no compatibility issues. The update downloads no problem, I select install now, it shuts down the computer and I get that glowing ring/progress bar that slowly moves up to 29% as it "copies files". Once the file copying is complete it reboots and I see the windows logo and the circle of moving dots. The dots do one rotation, then freeze. Nothing else happens.
Waited four hours, no change, no progress bar, no indication that anything is happening. I do a manual reboot, it resumes installation and hangs immediately. Reboot again and it restores windows 7.
I would like to upgrade my Windows 7 to Windows 10. I have so many files and games installed on windows 7. I am afraid of compatibility issue and might lose the save file.
Does any of here a Windows 7 Ultimate users and upgrade their OS to Windows 10? What happen does it affect any program and lost game save file? I want to know cause there's no turning back after I update my OS.
i did the win 10 free upgrade i had to before i could do a clean install. im not having any problems with the upgrade so far but i have always did a clean install of windows before this.
I had an 8.1 installation I didn't want to upgrade yet because I have a whole bunch of games I'm concerned about compatibility issues with. I woke up just now, having left my computer on, to find that my computer is over halfway through "upgrading Windows". I didn't want this; I have coursework that needs doing right now. Is there any way to cancel this once it's started?
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
I got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
I upgraded from 8.1 (genuine Sony Vaio ) using the media creation upgrade option, it installed and activated to windows 10 pro.
I then used the same media creation tool to download the iso and used Rufus to put it onto a usb so that I could do a clean install.
I installed it and skipped the parts prompting for a product key, however once it loads up when I try to activate it states 0xC004C003 details section says the key has been blocked?
I just finished an upgrade install of 10 from 7. I tested all programs and only had a problem with Avast and Microsoft Office Project 2007. The Avast problem is repaired.I double click to start the program > the "Office Project 2007" splash screen shows > the spinning orb blinks and it sits there for 15-20 seconds > then a "Configuration in Progress" window comes up > then a "Please wait while Windows configures MS Project" windows comes up > then I get an error : "There is not enough memory to complete this operation" > and that's it.I inserted my installation DVD and tried a Repair. I've tried to start Project in Safe Mode.
Windows 7 to windows 10 killed my windows 7 install.Is there a way to do the upgrade with out a complete install of windows 7.Using the windows 7 Lic Key.
There is a lot of questioning about making a clean install of windows 10 once you upgraded from Windows 8.1 retail version.
So there it is :
-If you have NEW hardware : So if you want to make a clean install of win 10 on you're new computer (actually it all depend on you're motherboard). You will need to re install windows 8.1 with you're licence that came with (Of course install it on you're new comp). Then you have to make the free upgrade again. In other words you have to restart from 0. And yes you're license is still good for windows 8.1. After the free upgrade win to 10, it will save you're new motherboard with you're microsoft account to the microsoft activation server. Well, its good as long as the upgrades are free (One year from the launch)!
--So for later re install, as long as you don't change you're MotherBoard,you can start from the Win 10 installer and you will not need to enter any license key. You just skip these steps and when you get on the internet and log on to you're microsoft account it will auto detect you're account with you're mobo and activate automatically. In other words, there is no key from free upgraded windows 10
-If you don't have new hardware : Well its very simple, you mobo is already saved with you're microsoft account so you can just install you're win10 from the installer. You do not enter any license keys and it should activate by itself when you connect to internet.
I think its always good to have a retail version for the actual system that we use with a good license key.
Received a MSI laptop with pre-installed W8.1. Planning to install a new SSD on m.2 slot. I have several options to update to W10.
p.s: I am keeping both SSD and HDD in my laptop
1) Clone from old HDD to new SSD using MSI burn recovery. Then update to W10 2) Upgrade to W10 on my old HDD. Get W10 activated. Perform a clean install on SSD. Lastly, format my old HDD as secondary drive
I recently upgraded to windows 10, and decided to do a clean install. So I made a image of my system (when it was windows 8.1), wiped my Hard drive (which still had the original windows 8 install,), and stuck a ios file on a usb stick. However during the install to my SSD (Which is different from my hardrive) the computer asked for a product code, something I do not have, and did not think I needed (my understanding was that windows 10 registered your hardware). If I skip it, it goes though the prossess of installing, but then restarts after finishing moving the files. I dont want to have to attempt to go though the effort of putting windows 8 back on the laptop, moving it over to the ssd, upgrading to windows 10, getting a product key that may or may not work, and trying it again.
Got a sabertooth z77 with two ssd on raid 0 (intel) another hard drive for backups (Regular sata) and another storage card (pciexpress sas highpoint 2720, with raid 5)
Windows 10 doesnt seem to like this.
Even booting the dvd itself its a drag and hr wont recognize the raid 0 not even with drivers (driver load will cause a watchdog blue screen)
Windows 7 and 8 dont mind. At all.
I feel like the csm thingy might have something to do.
Bios is latest. Sas raid is for storage only. Ill search for the manual of the board as the printed one doesnt have the options i got on the screen
I have a laptop that was originally on Windows 8.1. I upgraded it to Windows 10 recently, however there were a variety of deeply embedded issues. I tried every troubleshooting method I could find, tried to revert back to 8.1, and tried to repair and reset Windows 10. Nothing was working, so I had to use installation media from doing a clean install on my PC to install a fresh version of Windows 10 on my laptop.
I was forced to format the hard drive, and delete all the partitions to even get the clean install to work (the upgrade did a real number on my initial system), and because of this I'm now unable to activate Windows 10. The upgrade was the Home edition, and I clean installed the Home N edition (as far as I'm aware there's little to no difference). I made a note of the product key that was listed in the upgraded 10 before the clean install, which I assume was my product key from 8.1 that carried over, as it is 20 characters long and not 25.
Is there any way I can activate my clean installed Windows 10 Home N in this situation?
